I have an error appearing in my webbrowser, and as there doesn't seem to be a solution to stopping it, i'm attempting to just detect when it occurs, and use sendkeys to press enter.[code]..
View 8 RepliesIs here a way to detect Yahoo! Messenger popUp window appearing in system tray when an user from my list logs On or Off?[code]...
View 1 RepliesI am very new to vb.net. I need to be able to see when a certain popup window appears in another application. The time time it takes to appear varies so I need to know when it appears and in some cases when it has closed.
View 1 RepliesMy code was working fine when I tried with 3 columns. Now, when I mode columns (13) it throws the error.
View 4 RepliesI have a VB6 DLL that wraps a call to a 3rd party component. When I call my DLL from VB6, everything works fine, but when I call it from vb.net (2.0 framework targeted - VS2010) I get this error:
AccessViolationException occurred
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.This error only occurs on Windows 7 (Windows XP clients work fine).I've looked this up and all the articles I found talked about the declaration not being correct.I am not declaring any APIs calls though, the 3rd party component is early bound in my VB6 DLL.I can run the DLL, set a breakpoint,and it goes into my VB6 function, but errors calling a function in the 3rd party component.My VB6 DLL takes 3 string and one 32bit numeric (long in VB6) parameters. The 3rd party's DLL function that I am calling is taking a string (bstrDNSID as string is what Intellisense shows in VB6). This is where it errors.
Update: None of the marshalling has helped, so I tried creating a test sub in my VB6 DLL. I hardcoded all the values within the DLL's test sub. It works fine when called from VB6, but gives the same error as above when running from .NET. Also of interest, when I have the VB6 DLL running from the VB6 IDE, I do not get the error when calling the DLL from .NET.
I wanted a Message Box to appear when a file can't be found, for example. I made a Combo Box (ComboBox1) and a button, this is what the code was:[code]If a file can't be found, I want a message box to appear, not an Error Provider, I tried this code, but it did not work:[code]
View 2 RepliesMy asp.net website logs errors when they occur, but only sometimes shows the line of code where it occurred. Is there a way to find out what line of code my error is occuring on when the line is not provided?My Global.asax logs the error with the following code:
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
'Get MemberNumber
Dim MemberNumber As String
[code]....
It looks like the checkbox labeled "ckAdmin" is causing this error, but I do not know how to trace it. How should I go about tracing down this error or finding the line of the code this error occurs in?
I have developed serial port communication application using vb 2008 with serial port class.
Previously everything was ok. Now a days error occurs when closing serial port.
At the time of closing there is no receiving data .
Error is "The i/o operation has been aborted because of either a thread exit or an application request"
I am having an issues with my code causing my forum to close after an error occurs during a SaveFileDialog. My problem is if the form closes after an error occurs that doesn't save the file, the person would lose their text they made. If there a way I can embed the code in an If statement or Try catch so it only closes if the file was saved? Here is my
[Code]...
I am currently using Snarl to generate notifications whenever an event / error occurs in my program. How would I go about coding a native VB notification instead of using a 3rd party program?
View 3 Repliesif the rows CurTXId is 0 then I insert new records. and then call AcceptChanges on the PeopleTable.now if I have an error, for example conversion from null to Decimal causes an error and the first insert occurs before the error. now i have a row inserted but AcceptChanges hasn't been called yet.then i click save again and the insert happens again since the rowstate hasn't changed.how should I handle this?[code]
View 2 RepliesAs part of a review of my program on Softpedia, the Reviewer stated the following: If you call on a piece of software and it is not installed on your computer the application will pop up a nasty error message that may discourage beginners. Popping a dialog saying the reason of the error or that the software is not installed on the system would be a great fix.
View 5 RepliesSo, concering my project: I am trying to control an RC Car via Kinect, until now I got it working with key control only (eg WASD). So, I am using a Velleman K8055 Interface Board + the Kinect and VB Windows Forms. So far, so good, I created 4 Forms: menu, info, kinect-controls + wasdcontrols window. The error only occurs for my kinect-controls window (german name: Steuerung.vb) & that's my source
[Code]...
I have an application where I make calls to multiple SQL Server Stored Procedures,keep the user aware that the program is still running and how long the specific SP has been running so that they can abort it if it's taking too long.
My initial attempt was to wrap up each call to the SPs like this example:
Dim cm As SqlCommand = Nothing
Dim Conn As SqlConnection = Nothing
Dim Tran As SqlTransaction = Nothing
Dim PrevTime As Date = Nothing
[Code]...
I have a table adaptor that pulls from the sql database, when I edit the table adaptor query it makes this specific table adaptor not a part of the dataset. I have added a column to my database which will contain an integer, when I try to add this column to the query this error occurs, i am using the configure area of the table adaptor.
Error 'AuditProductsTableAdapter' is not a member of 'MemKingClient.MemKingDataSetTableAdapters.TableAdapterManager'.
I created a simple program which basically launches programs installed on 32-bit system in the C:Program Files directory. I purposely put an .exe line of code in the compiler but that .exe wasn't installed on the system, I was expecting for an error when I tried to click the launch button and I did. NOTE: I already have a beginning If statement and that program is actually installed in the system, works perfectly no errors appearing.
ElseIf lstMultimedia.SelectedItem = "HyperCam" Then Process.Start("C:Program FilesHyperCam 2HyCam2.exe") 'this program doesn't exist in the system"
When the error appeared I looked at it in detail and found it was a system.componentmodel.win32exception type of error, I'm guessing that means a file doesn't exist in the directory I specified therefore the program displays an error.Now what I want to do is display a message box saying along the lines "This program cannot be found in your system" or something like that. But I don't know what the actual syntax/code for it, so far from thinking I have this.
Else : lstMultimedia.SelectedItem = 'no idea what to put here Then MessageBox.Show("This application cannot be found in your system or is installed in a different directory", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End If
I am getting the below error when I click a row in the grid. But this error is raised only in exe, which is installed in client machine, but when I check the same from source code in my machine, i am not getting this error. I am able to locate the record.
[Code]...
I have a windows service I created that checks for data to post to an off site webservice over SSL. The service checks every 10 seconds for data to send, if there is data it opens a connection to the remote webservice, and closes the connection after 120 seconds (still checking for data to send during this time). The service works fine if a user is RDP'd into the server, but as soon as no one is logged on and the service attempts to push data, I receive the following error:"The underlying connection was closed: An unexpected error occurred on a send."I have tried running the service as a local service, network service, under my login, and under a service account, but nothing seems to work. The PC it is running on is a windows 2003 server (virtualized - vmware)
Protected Overrides Function GetWebRequest(ByVal Uri As Uri) As System.Net.WebRequest Dim oWebrequest As System.Net.HttpWebRequest = MyBase.GetWebRequest(Uri) oWebrequest.KeepAlive = False oWebrequest.ConnectionGroupName = Guid.NewGuid.ToString oWebrequest.ProtocolVersion =
[code]....
I am getting error in the following line of frmContacts.frm. The module code is quite right. I have mentioned the module code here just to give an exact idea .The error line is: .Connection = MyConnection (Wherever it is in the frmContacts.frm)The error read as : Name "Myconnection" is not declared.
Code in Module:
Imports System.Data.OleDb
Imports System.Data
Imports System.Windows.Forms
[code]....
I am wanting to popup a menu when a user presses the right mouse button on my listview. Here is my code:
If e.Button = MouseButtons.Right Then
Me.cnmnuLstCopy.Show(Me.cnmnuLstCopy, e.Location)
End If
I am getting this error:
An unhandled exception of type 'System.StackOverflowException' occurred in System.Windows.Forms.dll
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[code]...
The following error occurs : Object reference not set to an instance of an object.
im trying to make a popup blocker type message box that pops up when a popup tries to load a page, and it asks The page [URL]is trying to open,open in a new tab?
(label)
No (button) Yes (button)
how would i make a menu appear when i click somwhere on the page,how would i make it recognise a picture, and be able to copy it to a location on the local drive?
I'm trying to use the WebKit-component ([URL]) in VB with the help of Visual Studio 2008. This is running without problems, except for two following two issues:
1. Hints/Tooltips are not shown (e.g. as there usually will appear one if you stay with the mouse over the Google-logo)
2. If there's a popup-window, I don't know how to get the new desired URL.
[Code]...
how do you make a fake error popup window?
View 1 RepliesI'm working with a Silverlight Popup control (SL4). I would like to update data shown on that popup every time the user opens it (IsOpen=true) by passing a string and calling a Private method located in the Popup control behind code to fetch updated data.
I was hoping to place code to make this happen in the Opened event of the Popup, but such an event does not seem to exist (even though I found some documentation on it).
I have a usercontrol that has a popup that displays another usercontrol when the user selects an item from a listbox. When the parent initializes, all the usercontrols initialize.
<Popup x:Name="PopContactLogs" Width="670" StaysOpen="True" AllowsTransparency="True" PopupAnimation="Fade" PlacementTarget="{Binding ElementName=PageCustomerHome}" Placement="Center">
[Code]....
and it just keeps the original data in there. I'd really like to just reinitalize it every time and basically have a new webpart each time.
here is my code so far:
Public Sub cmdSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSave.Click
Dim i As Integer
[Code].....
when i click the button, i get a error message saying "Syntax error in INSERT INTO statement". as far as i can tell, i have everything i need to insert a new row into the database, and i dont see why this problem is occuring.
item(0) is an autonumber key field, so that should make a new record by itself, and i have declared the input textboxes as the data() array
I have a picturebox that displays an image on a form. The image thats displayed is from an image folder and has 8000+ images. The images pull in just fine and change as the text in the me.txtPartNo.text changes.[code]...
View 8 RepliesI have a program in VB.NET 2005. At some point I have to open an Access2003-Application for getting data in it. I do that by pretending my program is a human user and let it do all the work in Access as a human user would do. Filling Fields, pressing buttons etc. I use the Primary Interop Assemblies for that. So far so good. That code is in use for over half a year now. In the last week I got Office 2007 installed on my machine. Of course I tested the installed version of my program if everthing still works. Every test was succesfull. But if I do the same tests in Visual Studio it always crashes.
All I get is this Errormessage: {"Das COM-Objekt des Typs "Microsoft.Office.Interop.Access.FormClass" kann nicht in den Schnittstellentyp "Microsoft.Office.Interop.Access._Form3" umgewandelt werden. Dieser Vorgang konnte nicht durchgefhrt werden, da der QueryInterface-Aufruf an die COM-Komponente fr die Schnittstelle mit der IID "{66B22FB4-F70E-4F03-A00A-F76E9ADBBF10}" aufgrund des folgenden Fehlers nicht durchgefhrt werden konnte: Schnittstelle nicht untersttzt (Ausnahme von HRESULT: 0x80004002 (E_NOINTERFACE))."}
For all who can't read german:
"Microsoft.Office.Interop.Access.FormClass" can't be converted in to "Microsoft.Office.Interop.Access._Form3" ... Interface is not supported.
Code I use:
Dim access As Microsoft.Office.Interop.Access.Application = Nothing
.
.
.
access = New Microsoft.Office.Interop.Access.Application()
[CODE]...
The Error occurs when I try to access any property of "access.Forms("frmTest")"
my webbrowser controls shows an error msg when it detect errors in the page navigated, but i want it to be silent, i don't want to see any warnings.
View 6 Replies