I have a label and button on label in my asp.net webform.i want when i click on button then label1 will be visible with text "Success" and then it will hide automatically after some time say 10 seconds.I M using asp.net (VB)How to auto hide label after 10 sec and after label hide redirect to the ~/Default.aspx ?
View 1 Replies
In the about use should be a label and a button. The label should tell about the program and have the name of the programmer and the button should hide the about us form.Here's my code:
Public Class Form1
Private Sub ExitToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ExitToolStripMenuItem.Click[code].....
I am brand new to Vb.Net and was wondering how I could loop through each label and say if the label.text = 0 then Hide panel1. How would I get that accomplished?
[Code]...
I am successfully hiding a combobox, based on the selection of another combobox. However, I can not get the label of the combobox to hide as well. The code I am using, which is basically the same code for hiding the combobox itself returns the following error:
Error 1 'DOCUMENT_EVALLabel' is not a member of 'WindowsApplication1.Form1'
Here is the code I am using for the label:
Me.DOCUMENT_EVALLabel.Visible = (EVALUATIONComboBox.Text = "Text")
In mscharts i m able to give label to the marker points using the function atabindcrosstable using the code
Chart1.DataBindCrossTable(dr, "something", "anything", "a_data", "label=c_score")
now i want to hide the c_score label for the marker points.
I m showing the label in the tooltip on mouse hover using the [code]....
i have a form with a tab control and two tabs and a label below the tabcontrol.. in tab one i'm editing files and such and the label below the tabcontrol shows the directory of the file i am working on.. what i would like, is to have that label not be visible when i click on tabpage 2..
so basically, i need the code for the tabpage select. like when when you click a different tab, a different command applies..
I want to display the text of a label as a underscore character until specified otherwise. Kind of like how you can show text in a textbox as any character using passwordchar
View 3 RepliesI'm calling some data from my Oracle table and I have a field which is called 'image1' which is a BLOB field.
Sometimes an image is input into the field and others it's not. I need a way to read the BLOB field to see if its a blank and then show/hide my label based on its contents.[code]...
this is an exercise only but using VB2010 and trying to hide form label text like "password" etc. using the following functions ...
Public Function Encrypt(Value as String, nTip As Long) as String
Dim szTiped as String = ""
Dim nLen as Long, nInd as Long
[Code].....
All functions done, but the main function, the autorun and auto hide didnt work like i wish. for this keylogger, im using checkbox to make it autorun when windows startup and another checkbox to autohide. i already placed the codes but nothing happen. when i tick those checkboxes n restart my pc, nothing happen. is it because im using checkbox?
View 3 RepliesI'm curious if it is possible to hide a group of text boxes from view in a form until a particular condition is met, and to have a custom set of text boxes for that condition. To give an example; I want radio buttons offering choices for a manner of searching records, the user selects one and then a specific set of text boxes are displayed for the user to utilize, if a different option is chosen a different set of text boxes will be shown. Is this something that can be done?
View 7 Replieshow to auto hide programs when windows start up n put its icon in the hidden icon box? i know the codes to make it hide, but not auto hide. im using a check box. when i tick it, i hope it wont prompt when i enter windows environment. iv already make it auto run. now i wish to do it auto hide, and an icon will show up in the hidden icon box
View 7 RepliesI am trying to create a beautifull program interface using VS2005.I plan to create autohide toolstrip, but i can't fing how.
View 2 RepliesI am using a label in my form as status label there are may way to save the information in data set for exapmle datagridview cellendedit
Now when it is saved to dataset successfully I show a message to status label "Successful" and else "Failed"
Now my problem is when once successful is visible in status label it is always visible ( of course a silly point from a developer point of view)
I can do it like use a timer cotrol and clear the text after some time but I am already using two timers in my form and more timres can make application slow
how to hide exe into task-manager in windows 7 using vb.net windows application?I want exe is hide into task-manager in windows 7 & windows vista machine using vb.net(windows application)
View 3 Repliesi have this in my vb.net code.
label1.text = "Click on THIS ONE to proceed"
Now for the THIS ONE in the label text i want to give it a hyperlink or response.redirect.
I created a simple usercontrol AutoHidePanel by using toolStrip and a panel, which have to work like Solution Explorer. When the user click's the autohide pin the panel width will slowly minimized up to 3 pixels so that the user can't see that panel. when the mouse moves over to the control, It will appear as before and these functions are working fine.
But I have a prob. with below function. When the mouse leave the control, it should disappear again. so i wrote hide function in to the MouseLeave event of Both controls(Toolstrip and panel) Here the prob. begins, when the cursor moves from Panel to ToolsStrip or ToolStrip to Panel the MouseLeave event minimize the AutoHidePanel Control. I tryed this Hide Function in the MouseLeave event of my control AutoHidePanel but that dosen't even raises the event because the panel is filled in my control.
I want to add a window that will auto hide or enable me to pin it down like these windows on the VB IDE.
View 1 RepliesI have lost the auto hide option (greyed out) on the drop down solution and properties menus. The Toolbox still has the auto hide option. I cannot find the pin to set auto hide on the Solutin and Properties menus.
View 3 RepliesIs there a way to to hide the taskbar o.o and unhide it?
View 1 RepliesI am creating a very simple control, think of it as a bunch of labels, autosize=false, docked to the top inside a panel. I can't set the height of the label to any certain value, because I am unsure of how many lines the text will be inside the label. And I can't use autosize=true because then I only see one line. But I don't want a label in there that needs 50 lines and only has 30, then the next label only needs 5 lines but has 30, so some get cut off and some have way too much space. So I need a way to "autosize" the height of the label.
View 3 RepliesI'm not sure what I did, But I would like to get my toolbox back to normal where I can put it back on auto hide and such.
View 3 RepliesPrivate Sub uiSCORE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles uiSCORE.Click
'Displays Correct or Wrong in Labels
If ui1Textbox.Text.ToUpper = "FOOD" Then[code]....
I finally finished all my labels and textbox codes for this button.But now I have to code it so that I will be able to click the button and it will calculate all the wrong and correct answers in the labels and then finally place the percentage score in the uiScorePercentagelabel. What I dont understand is how to calculate all the different labels as one and then show the percentage right in the appropriate label.
I have been using vb6 for a while, I am following a tutorial by MS to develop a basic application and a simple task cannot be completed for whatever reasons! The tutorial asks to drag the label object from the toolbox and drop in the tab control container. Then, go to the label size property and adjust the size to some different dimansion. Basic stuff, right? It won't let me do it! After I enter the new dimensions (which by the way are not large or very small), the label size (both width and height) resets back to its original dimensions! I have the vb.net sp1 installed.
View 2 RepliesI'm try to hide the label after few second but it is updating page continuously after 10sec, i just want it once time when i click save button label on display me successfully for 10sec and get disappear
[Code]...
How would I create an automatic updating time field (every minute for instance), without everytime having to refresh the entire webpage?
View 8 RepliesIs there an effecient way to give one label the ForeColor, BackColor and Text of another one of 3 possible labels? I need to do this frequently for a dozen labels in a windows form.
View 2 RepliesI am using a label to display a song for an mp3 player. I wanted to scroll the text inside the label for anything that is longer than the label width. I figured out the width of the label and if the width of the text inside the label is longer. But I have no idea how to turn this into subtracting parts/pixels of the text currently displayed and how to append the subtracted parts to the end of the new text.
Sub f1timer2tick()
Dim g As Graphics = f1l2.CreateGraphics
Dim s As SizeF
If f1l2.Text.Length > 19 Then
[code]....
is it possible to show a figure in one Label in another label through a button click event? for instance, i have a figure in label1 and i want to display that figure in a label of another form is it possible?
View 1 RepliesHow to display time(24hrs) (auto) in the textbox without clicking any button or label , when i run the program.
View 7 Replies
