this code currently takes a jpeg image [] and copys the left half and pastes it over the right half so its like this [[. I need to modify this code so that the right half flips to form a mirror image with the left half,
Dim mb, rb, cb As Bitmap
lblMid.Image = Image.FromFile(tbFileName.Text)
mb = Bitmap.FromFile(tbFileName.Text)[code]....
How do I flip the image upside down (below the first image) Like as if a house were at the waters edge and you can see the house, and the reflection in the water?
code for drawing the image (which is a battery)
VB
'Finding center'
Dim batX As Integer = 160 - (imgDct(cbo_Battery.Text).Width / 2)
Dim batY As Integer = 200 - (imgDct(cbo_Battery.Text).Height / 2)
'Draw Battery
[Code]...
how to mirror the top half of an image of the bottom half, i already mirrored the left half of an image over the right half, as shown in the 2nd block, but i need to modify the 3rd block correctly to get the top half to mirror over the bottom half, how do i do this, - visual basic express 2008
Dim mb, rb, cb, db As Bitmap
mb = Bitmap.FromFile(tbFileName.Text)
cb = Bitmap.FromFile(tbFileName.Text)[code].....
I would like to know how to mirror text, in a certain public function. That would be great because I am learning functions right now, so basically what I need to happen is on FirstText_TextChanged:
{Mirrored Text Example: VBForumssmuroFBV }
'Public Function
SecondText.Text = MirrorText(FirstText.Text)
How to use arrays and certain functions as of right now....
In the left-hand label, flip the image (that is rotate the image 180 degrees). Do not use the built-in Bitmap or Image functions to accomplish this action. How to accomplish this without the bitmap or image functions? isual Basic 2008 Express
View 8 RepliesI'd like to verify if an image control has an image loaded . If it does , I want to unload that image (and load no image) , but if the image control has no image loaded , I want to load an image . Is it possible ?
If ImageMY.Image.Equals(Nothing) Then
ImageMY.Image = System.Drawing.Image.FromFile("C:ImageBlaBlaBla.jpg")
Else
[code].....
I created a new cursor (it works properly, I tried it in windows 7) but is not working for me in the program.I took the Windows cursor (aero_helpsel_xl, from C:WindowsCursors) and it appears to me the same error.i use with this code:
Me.Cursor = New Cursor("Patch..")
The problem say:: "{"Image format is not valid. Image file may be corrupted.
Parameter name: stream "}"
edit: I realized what the problem ... It can read only cur files with 24-bit color and lower - but it shows only two colors: black and white.
I have an app that loads a jpg into a picyure box, then updates exif data in exifworks classThe problem is that when I save the image(from image used for picture box) or class (to save exif data) then try to delete, sometimes I get success, others it won't allow delet I have gone to the trouble of using gc.collect, do events, put the delete in a timer & wait for the delete before continuing & still get the problem
View 7 RepliesWith a button click event, how do I make a picture box image property switch to a random image from the resources folder?
View 1 Repliesi want to save image in ms access 2000 database & i want retrive it in a crystal report in vb.net 2005
View 8 RepliesI've been searching for hours tonight searching existing posts, other websites and all i can find are examples of how to capture a image from a webcam.Does anyone have any code that simple talks to the camera device via WIA, and then saves every image found on the device to a hard drive?I found this code below. Credit i cant tell you as i have a bunch of different flavors of code, but this only saves the file as a tmp file, and not the actual image file i expected after selecting?
Imports System.Drawing
Imports System.Runtime.InteropServices
Imports WIALib
[code].....
In VB6 you could BITBLT things around before refreshing the screen. In .NET, I'm aware of DrawImage, but that can only be done on a paint event rather than before anything gets painted. The issue I have is, I need to open several files with image data in them and then build a bigger image with those smaller images. Before I could open them, BITBLT them to a Buffer. As far as I can tell .NET offers no way to do this as the only function I've been able to find (DrawImage) only works within the paint event. Is there still a way to do this in VS08 or no?
View 6 RepliesI am using ITextSharp and am trying to set the alignment of an image.
In C# (as per all the examples) it is:
code:
I cannot work out the equivalent of the "|" in VB.
i am creating a table in vb.net code (htmltable) with htmltablerows and htmltablecell. I gave on image control but thatr control cant have the .imageurl property, which i need cause i have a handler image.ashx which brings image from the database.
heres' the code -
TD = New HtmlTableCell
Dim img As New HtmlImage()
img.ID = "image_" & rd("ID")
[code]....
on the last line, "img.ImageUrl" i get this error -'ImageUrl' is not a member of 'System.Web.UI.HtmlControls.HtmlImage'how do i fix this?
I need a code that will load text, the correct image to match it and the command for each image. what i want to do is make a program that will download a swf and an image into to folders. then at startup the program will load all the swf and images and put the images into a listview so when you click on the image for the swf file it will give the link to the swf so it can be loaded.
View 1 RepliesI am "weeks new" to visual basic 2008 but I was hoping that someone might tell me how I can open an image in whatever type of "visible" graphics window (always positioned at: x=0 y=0); move to some "definable position" of interest x=(n) y=(n); change the brightness of that "individual pixel" by some "definable means of measure" from its original state; and save the new image as a separate image file?
View 4 RepliesHere is the code:
'Add images column to DataTable.
ds.Tables(0).Columns.Add("Image", GetType(BitmapImage))
'Create array of image paths.
Dim currentDir As String
[code]....
I have a Picturebox and a two Buttons on my Form. On click of one of the buttons I want to change the image in the picture box at runtime.
This works fine when I give the location of the image (the full path ) on my computer - but then of course it will not work if I use the solution on a different computer .
So I have made a folder named "Pics" inside my application and added two images into it.
How do I get to this local folder in the following code?
Picturebox1.image = system.drawing.image.fromfile (??? )
instead of the usual,
Picturebox1.image = system.drawing.image.fromfile ("C:UsersMyName My PicturesMyPicture.jpg" )
How to retrieve a binary image from a database using vb.net and insert the image into a GridView.
This is my DB
image (id as integer , img as varbinary(max))
I'm trying to update pictures boxes with images of controls stored in an imagelist owned by a control. The images stored in the control.imagelist do not showup in the picturebox. I'm working on simplifying the code to post, but for now could use help.If I store the image in a member variable owned bythe control it woks fine.Something to do with persistance of images in control owned imagelist? [code]
View 2 RepliesI can't remember exactly if this is possible or not but what I am attempting I would think should theoretically be possible. I know it is possible in WPF but the company I am working for doesn't want to make the transition just yet. Basically what I want is to use a background image on a form for the background and I have a docked control on the right and left. I have set the background on both of these docked controls to transparent however it is showing the back color rather than the background image. I tried, rather than setting the background image property, to override the onpaintbackground and onpaint events and use e.graphics.draw(picture, me.clientrectangle) but it still seems to just pick up the backcolor as the true transparent background so I'm wondering if it's possible to get it to show the background image through the control rather than the backcolor of the form?
View 3 RepliesI hoping to find a current and simple way to do this. I'm using VWD Express 2008 and SQL Express 2008.I'm able to get the client's path to the image file using an asp:FileUpload control on the web form.
How do I upload the client's image file and display it in the web form's image control?How do I save it to the sqlserver? The image table is already set up with a "Image" data type column. Can the image be saved to the database as simply as other data types?
I've got an app where the user uploads an image and the app resizes the image three different ways based on different variables. They all use the same image. I can't check to see if it's done using the image so I wondered if there was a way to check to see if the file is writable. A small loop that exits once it becomes writable (or "deleteable"). Working out of VB.NET.
View 1 RepliesI am working on a project related to saving an image captured from a scannner in a folder and in the database. The scan performs ok but when I save the image on disk and the path in the database I get the following error
[Code]...
I try to add text strings to an image but keep the metadata of the original image. The problem is How can I save ImgMetaData (from the original image) to the new image?
Here are the codes:
Public ImgMetaData As BitmapMetadata
Public myImageCodecInfo As ImageCodecInfo
Public myEncoder As Encoder
[Code]....
i'm lost on this code.. i have a picturebox that swaps 2 images, depending on the action, file_red and file_green.. what i'm trying to to is, if a picturebox switches a image or not, to be able to detect that and have textbox8 add a line with the detection.
[Code]...
I have a report that i'd like to display an Image for each record. But not all records have an image. The problem I have is that the last image is then repeated in the next record.
I would like to know how to have any empty field display a default image.
Code I have in report
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
Me.Image21.Properties("Picture") = Me.PhotoLink
End Sub
Photolink is a textfield and Image21 is an Image.
draw an image on form using an image in resources within VS2008VB instead of using C:userspublicimages
View 1 RepliesHow do get reference to the error image that is laoded by default if there is no image when using imagelocation I am trying to build an IF statement to only do something if picbox is not = error image
If PictureBox1.Image <> Image.error.system.drawing.Bitmap Then
i want to know, which way program runs faster1- add image to button through its property -> assign image from project resource file2- on form load event, assign images to buttons, from project resource file
View 19 Replies
