I am having a small problem initilizating my array.I have created a class called Mine. And another class called Grid.Grid has a property called Mines of type Mine()()In the Grid Constructor i want to set the size of the array to be (TotalRows,TotalCols) but cannot seem to figure out how.
View 4 Repliesincreasing the size of my array. i have this code but i don't know which of these code does not increase the size of my array even though i increment it.
This is the declarations:
Dim movieArray(0) As String
Dim ratingArray(0) As String
[code].....
What is the maximum size of a multidimensional array in VB.NET (in my case two-dimensional)? I'm using Visual Studio 2008, Framework 3.5 I found in msdn [URL]: "The length of every dimension of an array is limited to the maximum value of a Long data type, which is (2 ^ 64) - 1. The total size limit of an array varies, based on your operating system and how much memory is available. Using an array that exceeds the amount of RAM available on your system is slower because the data must be read from and written to disk." However, I am trying to use an array of data type single, with dimensions 64513 by 301 but Visual Studio seems to freeze when I execute the line to redimension the array ( Redim myArray(64513, 301) ). I have 4Gb of RAM and am using Windows XP (32-bit).
View 5 RepliesMy app is receiving data in blocks but I don't know what size data will be received until it is finished, unlike file reading. So my app loads the data in chunks of 1024 bytes and then stops when there is no data to read. My question is, is it possible to keep increasing the size of a byte array as the data is being received?
View 2 RepliesI want to write an extension method that works with all kinds of arrays (Integer, String, Decimal, ...). It returns an array of the same type and size as the input parameter array.[code]...
View 1 RepliesWhen you use array.length you get the size of the array and not the number of items in it.
For example:
Dim MyArray(10) as String
MyArray(0) = "Potato's"
MyArray(1) = "with"
MyArray(2) = "salt!"
MyArray.Length will return 11
How do I get the number 3? I am creating a class library so it's kinda hard to keep testing all kinds of methods until I get the right one .
I'm trying to find the sum of all the digits that make up the number 2^1000, which you may have guessed is from Project Eula. I think it's good so far except I'm just learning about arrays and dynamic arrays, so how will I know what the size of the index will be so I can specify when the Do loop should stop so I don't get an indexoutofrange exception?
vb.net
Dim BigNumber As Double = 2 ^ 1000
Dim DigitArray() As Char = BigNumber.ToString.ToCharArray
Dim Index As Integer = 0
Dim SumOfDigits As Integer = 0
[Code] .....
I want to determine size/length of an array that is, how many elements are in my 1 dimen array, can't seem to find the right method that works.
View 9 RepliesI m trying to manipulate some excel sheet data in visual basic but for tht i hv converted the excel file into text tab delimited file. now i m able access each column n row value as i want but the prob is the text file has to b input n the no of columns in it could be varied so i need a method to count the number of elements in th tab delimited array wen first time the text file line is read.
View 8 RepliesIs it possible to have a UD Class that can limit how big it can grow as an array?
for example:dim var(10) as class this would throw an exception cause the class will only grow up to 5 elements.dim var(4) as class valid cause it is under the 5 element rule dim var(4, 10) as class invalid cause the 2nd dimension is above the 5 element rule. (would throw exception)
Searching for entries in a source
For Each m As Match In Regex.Matches(txtDisplaySourceCode.Text, regExString)
_rtnSourceCode_LinkHolder = m.Value
Return _rtnSourceCode_LinkHolder
Next
But i dont want to just return one instance if there is more. Want to be able to hold all the urls some where that can be accessible from any sub
Ok I've tried for a while now but i cannot figure this out.I want to be able to take a text file of any size and convert it to a 2 dimensional array. Doing arrays with a set size is what i understand but i cannot figure out how to write a loop to find the size of the text file to be put into an array.
View 3 Replies[code]Is there any other solution by which we can initialise the array members using new?
View 5 RepliesHow can I resize the two dimensional array size without affecting its value?
View 3 RepliesI found out that you cannot set the array size for a structure when you are making it, i.e
[Code]...
I have to fix this by making a variable with type made by Structure bullet and then redimming it, i.e
[Code]...
This means for every variable with the bullet type i create i have to redim. Is there a way i can set the size of .mesh with .capacity for every single variable created with the bullet type automatically?
I am upgrading a project from VB6 to VB.NET. Unfortunately, I cannot include the DLL or even the name of the DLL that I am using here, I am under a confidentiality agreement. However, I hope I can post enough info here to get this frustrating problem solved.
In VB.net: Code:
So, if I run it as such, it errors out while calling SetParameters saying
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
If I comment out the line m_Parameters.SProperties = New S_Properties(9) {...}, then it does not error out, however the function returns 0, which means it did not actually set the parameters to the device. Trying to ReDim SParameters(9) will also give the hresult error. Doing it with my example above, I put a watch on m_Parameters in both VB6 and VB.net and they look IDENTICAL. All data is the same. Why would I get this ArgumentException in VB.NET and not in VB6 when I am passing in the exact same arguments as in VB6?
I'm attempting to get the size of a bunch of files located in a directory with an array. Using a single file, it works great. But as an array, I get an error. This is the code I was using:
VB .NET
Dim filepath() As String = Directory.GetFiles("C:Test", "*", SearchOption.AllDirectories)
Dim lvi As New ListViewItem
Dim fi As New FileInfo(filepath.ToString)
[code]....
It works... kind of. It adds each file to the ListView, when I just want the whole sum. I was hoping I could just use "DirectoryInfo" from the System.IO namespace, but everything I've been reading says I need to loop through the files.
I'm using extension methods based on an array and I would like to know if there is an easy way to check that array got a specify size instead of me doing a copy paste of
if array.count != 1000
throw new exception "size of the array does not match"
in about ~50 extensions
this a small sample of extensions that I use, I got WAY more
<Extension()>
Public Function IsWhite(ByVal board() As bitPiece, ByVal pos As Integer) As Boolean
Return (board(pos) And bitPiece.White) = bitPiece.White
End Function
[code]....
What's the best way to convert a varying size byte array to a string, and then to convert it back?
View 3 RepliesVS 2010 Converting Text file of any size into a 2 dimensional array
View 15 Repliesi have a problem with the size of array i want to make a 2-Dimensional array with large size such as
[Code]....
Trying to create a program that accepts a square array size 4 by 4. Then it should print the totals of the rows and columns. I started with a form and made text boxes and created a print button. I made it so that numbers can be input into the boxes. When hitting the print button, it should print the totals of what was input, however, it isn't doing that. Is there a different way to write the array code so that it will print it? Should i not have text boxes but rather have labels with fixed numbers set in them?
View 11 RepliesI am trying to create and initialize an array of structures of a fixed size. Each struct will be populated when a button is clicked. Here is an example of my struct:
public structure buttonStruct
dim x() as Boolean
dim y() as Boolean
[code]....
In my form_load function I am declaring the array of structs and:
Dim BtnStruct(15) As ButtonStruct
BtnStruct(0).Initialize()
[code]....
Whenever a specific button is clicked, I am trying to collect data and store it in the respective struct and so for example, if button 1 is clicked then I will store the data associated with button 1 into BtnStruct(0). The position of the button is stored in a public variable called BtnNum. If I attempt to store information in the struct inside another function as follows, I receive an error
BtnStruct(BtnNum).x(pos - 1) = temp "btnstruct is not declared. it may not be inaccessible due to its protection level"
Im trying to increase the size of an array by 1 each time a button is pushed and have the new value read into the array. I use a variable nIndexItems which is increase by 1 each time the button is pressed. I need preserve the existing data so I have done the following: ReDim Preserve arHours(nIndexItems) This increases the array but doesnt preserve the data. I found the following so I tried it but its not working wither: ReDim Preserve arHours(UBound(arHours) + 1) how to keep this data?
View 5 Replieshow can I set the size of my integer array if it is determined at compile time?
Class Modlue
Private thisNumber() as integer
Private Sub Button1_Clicked(byval sender as object, byval e as EventArgs) Handles Button1.Click[code]......
i am very new to VB and have been trying to make a hangman game. I was wandering if there is a way to add multiple label boxes to a form based on the size of an array. For example a user inputs the word h-e-l-l-o in a input box that word is then split and put into an array(arrword) then i want the main form to appear with 5 label boxes each one containing a letter that from the array(arrword)
View 8 RepliesNow all went well about from using the structure correctly. The working of the structure was perfect. How ever i missed Two important issues. The structure needed a fixed size of 10 items (9 in programming terms starting from 0) And also out of the 5 items allowed to be chosen as one of the member types for the structure a limit of 5 items of that particular type.
[Code]...
I have a label which appears full screen on a projector (VGA 2). In this label I will be sending strings. Some one liner's, some wrapped paragraphs. Some multi-line with carrage returns. My goal is to have the font dynamically change size to be as large as possible without overflowing the fixed label size.
View 10 RepliesWhats the font size real meaning? since when i use Arial font size 10 in the report its gonna take different space than the textbox im using (Both using exactly same font type/size/unit) its kinda if i set 10 milimiters to the font size why would the i and M for example have so diferent size.
i wish it was like in the Notepad where all the letters take the same space. what i need its to give a certain texbox(in the report) with auto grow to have always the same lines of height but its not posible to calculate it from vb b4 being inputed to the report.
How to make the form size automatic setting the size equals to the screen. or Maximize the whole form including the form components.
View 3 Replies