i searched in Google,i ran with few suggestions, like deleting obj folder and rename the class names, those are not work for my project, still error is same like: The item "objDebugBillofLading.Resources.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter. C:WindowsMicrosoft.NETFrameworkv4.0.30319Microsoft.VisualBasic.targets
View 1 RepliesI have a VB.NET project with XHEO licensing(to license a product) and for that I am using <projetname>.PLSK file which was added to the my solution. When I tried create a new .plsk instead of existing one I got a error while building. The error is like this.
"The item "objRelease<projectname>.plsk" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.
I am sure there is only one plsk file and when I tried to build with previous .plsk file got the same error. Where is that resource parameter are stored. How to delete that?
I got an error when I tried to open the designer for one of my forms in Visual Basic 2010 express and I had the option to ignore it so I clicked that (which I regret doing so much) and now my form is erased,but I still have the code for it.I tried right clicking and selecting show designer but it just brings up a blank form. I had a datagrid control called "DataGrid1" and when i tried adding a new control to the blank form it says that "DataGrid1" already exists but it doesn't.So after I resolved the first 85 errors I got one more that doesn't make sense:
Error 1 The item "objx86DebugWindowsApplication1.frmMain.resources" was specified more than once in the "Resources" parameter.Duplicate items are not supported by the "Resources" parameter.
Error1 The item "obj\x86\Debug\MassText.MassText.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.MassText.
I have one form in my project, and the project built and ran just fine until I added a method to it. There are no other errors. I tried deleting the files from the project folder it claims duplicates of, and when trying to rebuild, the files are just added back and the error is thrown again. Additionally, I have also tried deleting my *.resx files, and the project will not compile and run without them either.
I would.Error1The item "objDebugMerchGear.Form1.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.MerchGear...How do i fix it.
View 1 RepliesVisual Basic 2008 rookie question. I am getting the error message 'Error 1 The item "objDebugCIT163Lab1Cdrb.WeatherReport.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter.CIT163Lab1Cdrb'when I debug. I am familiar with Visual Studio 2008 having used it for my previous C# course. Zipped and attached the project below. I hadn't finished the coding, but this problem seems to be of a setup nature I should either resolve before I continue or start from scratch
View 1 RepliesI have a List object and I want to remove the duplicated items but leaving at least one of the duplicated items in the list;I wrote something like this however I would optimize this code for better performance, is there something faster?
Const chars As String = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"
Dim rnd As New Random()
Dim mylist As List(Of String) = Enumerable.Range(1, 100).Select(Function(i)
[code].....
How to remove duplicate resources...
I get this error
"there is already another resource with the name....."
My visual studio 2005 has been running great up till now The menu items in the menu toolbar display exactly as follows:File File Edit Edit View View File File Edit Edit View View Tools Tools Tools Tools Window Window Community Community Help Help Window Window Community Community Help Help
Error List is displayed as follows:(I've excluded the icons)0 Errors 0 Errors 0 Warnings 0 Warnings 0 Messages 0 Messages The standard toolbar images are also displayed in 'duplicate'
This is before I open a project and visual studio is on the start page. The 'duplicates' do not go away even when a project is open.When project is open, Solution explorer displays duplicate images as well
I've tried all the following but still cannot get it to display normally. Restored my computer to a time when it was working ok. Full scan on my computer with AVG premium which includes spyware etc (No viruses , etc found) All software is updated fully
error: the item "objdebugassociateassist.frmdbsetup.resources" was specified more than once in the "resourceS" parameter. duplicate items are not support by the "resources" parameter.
View 1 RepliesI have a List(of String). For example: {"C1", "C12", "C10", "C1", "C6", "C22", "C1", "C6"}. I am trying to write a function to give me a list of duplicates: {"C1", "C6"} in the list. Each duplicate will be listed only once. The function I wrote does give me anything back at all. I can't figure out why. how to translate that syntax into VB.net since I am not up to speed on LINQ yet. It is here: How to get duplicate items from a list using LINQ?
''' <summary>
''' Given a List(Of String), returns a list of items that are duplicated in the list.
''' Each duplicate returned is unique.
[Code].....
I'm designing a web page with two dropdownlists, one for the Make of a car, the other for the Model, both bound to a database with separate SQLDataSources, and using a distinct statement. I add "All" at the top of both by setting appendDataBoundItems = true and adding items named all. Then when I fill the Make with a querystring all the model items get added twice (but only the databound items).
Here's my code:
<asp:DropDownList ID="DropDownMake" runat="server"
DataSourceID="SqlMakes" DataTextField="Make" DataValueField="Make"
AppendDataBoundItems="True" EnableViewState="False" AutoPostBack="True">
[Code].....
I am populating a combobox with data from a .txt file; however, there are 1000 entries but only 4 different possibilites 1, 2, 3, and 4. How can I have the combobox only allow a selection of the 1-4 with repeating all 1000 numbers?
View 3 Repliesi am trying to load XML document and populate few checkboxlist. I use DataTextField as below.
[Code]...
when I load items in to a treeview, there's several items the same.Say it's like this:[code]How do I delete the duplicate items so it only shows subitem once?
View 7 Replieswhen adding picture to dynamic picturebox from my.resources in .dll a duplicate semi functional picturebox is added too, behind the picturebox i intended to add. has anyone seen this happening before or can provide any insight into this?
View 1 RepliesI have to extract from a text, group letters (2-by-2 characters), for example : from this string : "THIS IS SOME" => THHIISS IIS
View 32 RepliesI was generously guided by the community to use LINQ to find duplicates on my listboxes the last time around. However, I am now in a tough spot because I need to find and remove duplicates from a multicolumn list view. I tried using LINQ but it says that the listview object is not "queryable". Is there a way for me to find and remove duplicates using only one column of the listview? [code]The code now runs fine when I call it. But it does not remove the duplicates:
View 1 RepliesI want to know to how to delete duplicate items in menubar?
View 6 RepliesHow would one go about checking a listbox's items for duplicates? Basically I need to write a program that displays the teams from a text file provided by my instructor, in alphabetical order. I can do that, but what I can't figure out is how to prevent the For loop from adding a duplicate team. What I'm envisioning is:
If teams(i).name is not in lstTeams.Items Then
lstTeams.Items.Add(teams(i).name)
End If
I have a program that compiles and works so far, except for the above problem and my alphabetical order (which I can probably figure out on my own:
Public Class danbrockteams
Structure team
Dim name As String
[Code]....
This works except that my listbox is filled with the team every player is in rather than just listing all possible teams. Not exactly looking for someone to just give me the answer, as I understand things best when figuring them out on my own, so I suppose a hint is what I'm really after.
I recently put one of my projects onto a memory stick to use on my new laptop which I now have. I installed Visual Studio on the laptop and opened my project. I could edit the code and it would work fine. But when I wanted to edit the actual design, it would give me this error when compiling:
[Code]...
The problem is: I have a list of objects, with some containing the same PlanId property value. I want to only grab the first occurrence of those and ignore the next object with that PlanId. The root problem is a View in the database, but it's tied in everywhere and I don't know if changing it will break a ton of stuff nearing a deadline.
So, if I have a list of PlanObjects like such.
Plan1.PlanId = 1
Plan2.PlanId = 1
Plan3.PlanId = 2
Plan4.PlanId = 3
Plan5.PlanId = 4
Plan6.PlanId = 4
I want to take a sub-list from that with LINQ (italics mean an item is not included)
Plan1.PlanId = 1
Plan2.PlanId = 1
Plan3.PlanId = 2
Plan4.PlanId = 3
Plan5.PlanId = 4
Plan6.PlanId = 4
For my needs, it doesn't matter which one is taken first. The Id is used to update a datsbase record.
in resources there is a text file with items like number 1
[Code]...
I seem to have developed a strange problem with one of my projects I think this came about because a renamed a form in a windows application. Now whenever I try to run the application I get the error message: -
Error 1 The item "objReleaseDvdDatabase.frmDVD.resources" was specified more than once in the "Resources" parameter. Duplicate items are not supported by the "Resources" parameter. DvdDatabase frmDvd is the one I renamed to frmMain.Try as I might I cannot seem to find the "Resource" parameter mentioned in my IDE, VS Pro 2005,
Error Message: "This server version is not supported. Only servers up to Microsoft SQL 2005 are supported VB.NET" I am using VB.NET 2008 and attempting to connect to SQL Server 2008 with XP as the operating system. I have service pack 1 installed in Visual Studio but this error message presists. The articles I have read on this error said to install sp1 as a solution but I have done that and the error persists. FYI, the error does not occur when I am using code to connect to SQL Server but when I attempt to connect using one of the designer wizards this error occure.
View 3 RepliesI have this data in txt file and the data keeps changing all the time.
[code]...
I would like to read all lines and compare, if the same name and same address is found, which is in the [......], then i need to count it and show the most frequent buyer!should i read it all and put in array, and compare and put the duplicate data and count into another array?
i'm unable to debug my project that i made. i save it and everything, but it just won't playit says Warning 1 Could not find type 'WindowsApplication1.My.Resources.Resources, Time table'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built. C:SchoolIPTTime table, using 2 loopsTime table, using 2 loopsForm1.Designer.vb 123 0 now when i open it up and try to debug it , it comes up with an error, i even try referencing it but it does nothing ,
View 2 RepliesFollowing code doesnt work and raise error "A parameter is missing. [ Parameter ordinal = 1 ]".What s wrong with it?I am developing pocket pc application in vs 2008 and sqlce 3.5 sp1.
[code]....
I'm Trying to Call the Stored Procedure which has one input Parameter and one output parameter . VB.net code is below
[Code].....
I want to have a "template" function that can receive different parameter and a type parameter, like:[code]But Vb told me that tupeList is not defined... is there a way I can do that?
View 2 Replies