I created button "Calculate Pay" and under this botton I created a label (lblOutput).How should I wirte in lblOutput label to display what happens after "Calculate Pay" button is being clicked?
View 3 Repliesform1 have four buttons, i want to set a label text in form2 according to which of the button on form1 is clicked.below is what i tried so far.on form1 each of the button click event i made it focus
Private Sub Answerbtn3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Answerbtn3.Click
Me.Focus()
Form2.Show()
and on form 2 load event i have
Private Sub FinalAnswer_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Main1.Answerbtn1.Focus Then
Label2.Text = "You choosed option '
[code]....
the above code displays only the first condition ("You choosed option 'A'"") on the label when any of the button is clicked?
I'm trying to convert input and display in a label using a calculate button click.I need to take the input from the textbox add it to data inside a label and display it in a label (output). The data has to be validated for no negative or non numeric data. [code]Nothing is being displayed in the output label and only getting label with error msg???
View 5 RepliesI have a calculate button that, if clicked more than once adds the total of what I previously had to the new total as I am using a loop. I was thinking that I could get around this by only allowing the button to be clicked once, and if the user attempts to do this more than once a messagebox will appear saying that you can only calculate the price once and the form resets but i can't seem to get any code working.
View 4 RepliesIn trying to test some graphic features, I am trying to get them to display on load so button doesn't have to be pressed. I used the following code as suggested from forum. Message boxes run but ellipses aren't displayed until button is clicked which is what I am trying to avoid!
Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Button1.PerformClick()
Button1_Click(Nothing, Nothing)
[code]....
I have nested repeaters, each item in the nested repeater has a label and a button on it, i want to beable to access the label.text when the button is clicked, I think i'm nearly there as I can return the index of the repeater and nested repeater that is clicked, i'm just having some trouble finding the label itself.
You might be able to help me without me posting the repeater code. Here is my code behind for when the button is clicked.
Protected Sub btnEditUser_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim btnEditUser As Button = DirectCast(sender, Button)
[Code]....
I'm currently getting this error 'Object reference not set to an instance of an object.' when trying to write the value of UserId.Text so i think i've got it slightly wrong in this line:
Dim UserId As Label = DirectCast(reClients.Items(selectedClient).FindControl("lUserName"), Label)
I have a DataList, and each data list has a label and button, I want to get the text of the label when the button is clicked for each data list row I am using vb.net.
View 1 RepliesSo, I'm working on a simple game in Visual Basic, and I have 2 labels. One named "pointsLbl" and one named "pointsleftLbl":
pointsLbl.Text = "Points: " & points
pointsleftLbl.Text = "Points left: " & pointsleft I also have two integers, one named "points" and one named "pointsleft". The problem I'm having is that when the point boost button is pressed, the labels don't update and also don't show the new points and new points left. Private Sub boostBtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles boostBtn.Click
[Code]...
The idea is to make something that would count clicks but I dont know how to make it so the label increases by 1 when the button is pressed
View 15 RepliesI would like to have a label's text recorded into a database when my button is clicked. I do not yet understand the database connection. I have created the db, and have the following
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Conn As String = "Provider=Microsoft.SQLSERVER.CE.OLEDB.3.5; Data Source=c: empTestDB.sdf;"
Dim tConnection As New OleDb.OleDbConnection(Conn)
[code]....
When I try to test this the .ExecuteNonQuery() becomes highlighted and says the given type name is unrecognized. My table is setup as table1 and the only 2 columns are datetime and temperature. I want the label text to go to temperature and I would like somehow the time the temperature was taken to go into the datetime field. I had the provider=microsoft.jet.oledb.4.0, but I changed it since I thought this was the one to use.
I'm using Visual Basic Express 2010. I have the prompt, the textbox and the calculate button. For the answer do I have to make a separate label for the answer in seconds and the actual response "That will take (separate label for answer) seconds" I made a click event button and assigned the following as global variables at the start of the form:
Const intSpeed As Integer = 1207
Const intTime As Integer = 3600
Then I made a click event for the button. I don't know what the formula is. Basically the user inputs a distance in the box, the calculate button tells you how long it will take for the vehicle to travel that distance in seconds.
Here's the interface: [URL]
Criteria:
Are We There Yet?
The Thrust SSC, a super fast vehicle tracked at 1207 Km per hour (750 mph) was clocked on the Black Rock desert back in 1977. Build an application that will tell people how many seconds it would take to get to their destination if they were driving the vehicle. Of course this doesn't include having to stop for stop signs, travel through school zones, or slow down for corners.
You need to include the following:
1.) Design the application with a prompt label and textbox to collect the distance from the user.
2.) A calculate time button
3.) The form must have the text property changed to read "Are we there yet?"
4.) The objects must have both the Text property and Name property changed to an appropriate value.
5.) A constant global variable should be used to represent speed of the vehicle.
6.) A constant global variable should be used for seconds (there are 3600 seconds in an hour)
8.) A local Dim variable declaration can be used within the button click to hold the distance value.
7.) Variables should be declared with the most appropriate data types.
8.) Include a "Text Changed" event to reset the time in seconds to a blank value when the user starts entering in a new distance.
9.) Comment code should be included
I'm try to hide the label after few second but it is updating page continuously after 10sec, i just want it once time when i click save button label on display me successfully for 10sec and get disappear
[Code]...
I need to display two images when the button is clicked. First the user will browse for the two images and after clicking the third button it should display the two images. I have this code so far. I'm a complete newbie in vb
Dim dialog As New OpenFileDialog()
If DialogResult.OK = dialog.ShowDialog Then
TextBox2.Text = dialog.FileName
End If
I am here by to ask help on enhancing messageboxs. How is the way to Display a picture(like a JPG file) inside a messagebox along with text when a button is clicked?
View 9 Replieswhen i clicked the final button to display my results "as string" it still showeed the number?? here is the code i wrote, is relativley simple, but the theory doesnt make scence to me Basicly its a box with 3 lables, (first name, surname and age), 3 text boxes (for the user to input this info) and a button at the bottom called "display in message box" so when i click the button, it displays the users input in the form as a message box. [code] what i dont get is if i said to VB that vaiable "Complete" was STRING then howcome it still displays the AGE which is an Integer (a number) not a string??
View 3 RepliesThe pay rates for the project are:
a. Level 1 - $10.00
b. Level 2 - $12.00
c. Level 3 - $14.00
d. Level 4 - $16.00
e. Benefit Deduction Rate - 0.10
f. Overtime Factor - 1.5
For ease of program maintenance, all of the above rates and factors must be stored in module level constants. All references to pay rates in the program must refer to the module level constants.
When the Calculate button is clicked:
a. The value in the Hours text box must be validated to insure that it is numeric value greater than zero.
1. If the value is not valid, a message box must appear as shown below and the user must be offered the option to continue processing or quit the program.
2. If the user chooses to continue processing, the focus must be set to the Hours text box.
3. If the user chooses to quit, the program must close immediately.
b. If the value is valid, the program must calculate and display the total pay in the Total Pay label.
1. The pay rate is determined by which Job Grade radio button is checked.
2. For hours less than or equal to 40, the total pay is the hours times the pay rate.
3. For hours greater than 40, the total pay is 40 hours times the pay rate plus the hours in excess of 40 hours times the pay rate times the Overtime Factor.
4. If the Full Time radio button is selected, the total pay must be reduced by the Benefit Deduction Rate.
5. The value displayed in the Total Pay label must be formatted with a dollar sign and with two decimal
places.
6. The focus must be set to the Hours text box.
Why i get an error when i try to run this code
Code:
Also the message box, both yes and no close the program.....
How to display time(24hrs) (auto) in the textbox without clicking any button or label , when i run the program.
View 7 RepliesUsing 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
In the about use should be a label and a button. The label should tell about the program and have the name of the programmer and the button should hide the about us form.Here's my code:
Public Class Form1
Private Sub ExitToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ExitToolStripMenuItem.Click[code].....
I am reading from an excel information from column 'D' where something in column 'E' is <> to something. This is fine, but I want to change the value of column 'E' once it has read the information from column 'D' so that next time it reads it, it wont read that same line again, because column 'E' will have changed value.[code]This line is the one that doesnt do anything, but I want it to update the value of column 'E' with Yes: cmd. Command Text = "UPDATE [Sales$] SET (Delivered) values (Yes)"Also, can anyone spot why it may be missing out the first of the 'SELECT' queries.This line works:"SELECT Phone FROM TblContacts WHERE " & Event_query & Condition & Abs_value however it doesnt get the first one ever, but all the rest that meet the query?
View 5 RepliesI am creating multiple labels on a form dynamically. Essentially then they become an array.
[Code]...
my code looks something like this:
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
curtime.Text = TimeValue(Now) 'curtime is label
[code].....
I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName)
If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then
ButtonName.BorderBrush = Brushes.Black
[code]....
How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim receipt As LinkButton = FormView1.FindControl("LinkButton1")
' receipt.Enabled = "true"
[Code].....
I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[code]...
Is there a way to detect when a label is clicked without doing on click events for all the labels? I want to be able to detect the click, find what has been clicked, then I can change the label since I'll know which one has been clicked.
View 11 Repliesway to highlight groupbox or label when clicked?? way to show selection of a thumbnail(one out of five images) when clicked....
View 3 Repliesi need to calculate age of a person and dispaly it in a label. for example i have a textbox, with these values, 130790, from this number it should generate my age. DDMMYY
View 2 RepliesPrivate Sub uiSCORE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles uiSCORE.Click
'Displays Correct or Wrong in Labels
If ui1Textbox.Text.ToUpper = "FOOD" Then[code]....
I finally finished all my labels and textbox codes for this button.But now I have to code it so that I will be able to click the button and it will calculate all the wrong and correct answers in the labels and then finally place the percentage score in the uiScorePercentagelabel. What I dont understand is how to calculate all the different labels as one and then show the percentage right in the appropriate label.
is it possible to show a figure in one Label in another label through a button click event? for instance, i have a figure in label1 and i want to display that figure in a label of another form is it possible?
View 1 Replies