Interface And Graphics :: DirectDraw Transparency. Nothing Works?

Nov 28, 2008

I found a tutorial for DirectDraw online and can get a sprite shown on the screen. Problem is that when I try to make the edges transparent nothing I have tried works. Here is the code

Code:
Public Sub InitializeGraphics()
GraphicsCard = New Device 'This will initi

[code]......

View 2 Replies


ADVERTISEMENT

Interface And Graphics :: Collision Detection And DirectDraw?

Aug 28, 2009

I'm using DirectDraw to create a (very) simple little movement game... (so far not really a game, but hey, gotta start somewhere) And I'm having a little trouble with my collision detection... ok, it's probably not conventional collision detection, but I'm just learning so far...I have a few surfaces set up etcetc, and have animated a sprite on a tile based background... but the problem is whenever I collide with a certain tile (which I've set as unpassable) from the top or the left, it screws the position of my player immensely... this is quite a headache as I can't seem to see a problem...

ps. Another thing, I can't seem to be able to open my pictures without using the entire directory.

View 2 Replies

Interface And Graphics :: Save Graphics As Png With Transparency?

Aug 1, 2010

Ok I have this: This makes a sub called 'graphicspaint' then writes "demo version" to a picturebox1

Code:
Imports System.Drawing
Imports System.Windows.Forms

[code]......

View 8 Replies

Interface And Graphics :: Can Transparency Key Be Disabled

May 16, 2010

During form design and after placing a scrollbar on the form, I ran the debugger and found that the center of the scrollbar was transparent. After playing with this a bit, I managed to stop the transparency by changing the key to bright pink as I have nothing with that color. Can the transparency key be disabled?

View 3 Replies

Rendering Graphics Efficiently - DirectX - Graphics Card And Use Of DirectDraw Or OpenGL

Sep 23, 2011

We have a GIS application that has some performance issues. It creates and sends an image to a web browser. We start with a Bing Maps imager, add complex polygons (complete with transparent fill), save the finished image as a PNG, and send it to the browser.

The idea has come up that we could possibly install a graphics card and use DirectX or OpenGL to improve performance. I believe this would be the case even though we ultimately generate an image instead of sending the data the the screen. I believe our processes could still make use of the API and the hardware acceleration it provides. Our process is not unlike what CGI film makers do to render individuals frames of a film, though we simply render a single image and send it, as opposed to the hundreds of thousands of images needed for a single CGI film.

So my question is: would a powerful graphics card and use of DirectDraw or OpenGL provide us a worthwhile performance boost? It can take us 20-30 seconds to render a more complex map. Which is a long time to wait on a web page...

View 10 Replies

Transparency Works Only At 16 Bit Color?

Apr 24, 2012

I've read that using TransparencyKey on a form (for the creation of non-linear forms) only works with color density at 16 bit.

I've tried it a 32 and 16 and found it to be true.

View 3 Replies

Interface And Graphics :: E.Graphics.Drawstring Length Overflow Page?

Nov 19, 2010

Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.

[Code]...

View 3 Replies

Interface And Graphics :: Passing Bitmaps & Graphics To Subroutines As Arguments

Jan 22, 2011

I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.

[Code]...

View 3 Replies

Interface And Graphics :: System.Drawing.Graphics.DrawString On Other Window?

Aug 14, 2009

drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.

View 2 Replies

Interface And Graphics :: Create A User Interface In A Game Such As The Application XFire Using VB?

Jan 12, 2010

how to create a user interface in a game such as the application XFire using Visual Basic?

View 3 Replies

Interface And Graphics :: Use A Graphical User Interface That Contains A Drag And Drop Form?

Oct 19, 2008

I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.

View 2 Replies

Interface And Graphics :: Creating A Class Holding Some Graphics?

Jan 12, 2011

Ok, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?

View 13 Replies

Interface And Graphics :: Error - Graphics Paths For Designing

Oct 29, 2008

Using graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())

It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'

View 2 Replies

Interface And Graphics :: How To Procede With An Interface Design Approach

May 18, 2012

I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?

View 4 Replies

Interface And Graphics :: Link A Class / Object To An Interface?

Apr 21, 2010

I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)

.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface

[code]....

this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.

View 6 Replies

Interface And Graphics :: Picture Of Interface And Get Feedback On Changes For Easier Use?

May 21, 2012

Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?

View 1 Replies

Interface And Graphics :: Draw On Tabpage's Graphics?

Jan 19, 2011

So I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.

When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.

View 1 Replies

Interface And Graphics :: [VB2010] - Some Graphics Effects?

Dec 5, 2011

i whant do my own shadow effect. i can do the shandow. but how can i plus 2 bitmap images(1 above the other)?

View 15 Replies

Interface And Graphics :: Keep Graphics Over Image

Oct 28, 2011

I load my picturebox with a jpeg. If I put my DrawObjects() sub into picturebox paint event.When ever a picturebox.refresh or picturebox.visible = true (vb.net seems to draw my DrawObjects() first, then load the jpeg Image over my drawing - erasing drawing) Is there a way to get the picturebox to redraw the jpg image first then draw on it, in picturebox paint event?

View 10 Replies

'True' Control Transparency - Control With Motion Graphics (simplicity, A 'video Player' Control)

Dec 29, 2010

Here's my situation: I have a control with motion graphics (for the sake of simplicity, a 'video player' control) in my project. Think of a PictureBox with constantly-changing images. In front of this will sit a second control (such as a second PictureBox of the same dimensions). The topmost PictureBox will be drawn to in its Paint event.

I need to draw very few elements, and the bottom control is updated much more frequently than I need for this drawing. So these elements are drawn to the topmost control. Think of a news broadcast, where they have live video in the background, with a news channel logo, news ticker, and sometimes gradient visible in front.

I'm trying to create that 'foreground' control, and the closest I believe I have gotten so far is the following:

Imports System.Drawing
Imports System.Drawing.Imaging
Imports System.Drawing.Drawing2D

[CODE]...

The 'Opacity' property in the code above is a sort of "scaling factor." The image drawn to the top control may, in different parts of the image, have any alpha value from full transparent to a full 255. This 'Opacity' property is applied to the entire image being drawn, scaling the alpha values of each pixel.

See the following pictures for description:

[URL]
[URL]
[URL]

View 9 Replies

Interface And Graphics :: Possible To Do Image Map

Apr 4, 2011

Just want to know if it is possible to do an image mapping in VB2010?..

View 3 Replies

Graphics, User, Operator Interface

Feb 16, 2012

I am using Visual Basic 2005 for an Operator Interface in an industrial setting. Where should I be looking to help make my Operator Interface even more eye pleasing and practical?

View 2 Replies

Interface And Graphics - Datagrid Wrapping In WPF

Oct 4, 2010

I am having a datagrid in WPF application and I need to show the text wrapped in the cells. Basically I am reading from SQL server and displaying them in the Datagrid. Some of the fields having more than 255 character length and I want to show them as wrapped. To do this, I created my own style and trying to apply that to a data grid cell, but it is not working. [Code]

View 1 Replies

Interface And Graphics :: .NET And Video (re-)encoding?

Apr 11, 2009

I'm considering working on a video encoding framework. Essentially a program to re-encode a video file from one format to another, using codecs which are widely distributed. (Codecs commonly found on the average PC.)Emphasis would be on reformatting - rescaling, cropping - in a visual environment. Is vb.NET a good environment for such an application or would it be wiser to look elsewhere?

View 4 Replies

Interface And Graphics :: 3D Plot And Rotating?

Jun 18, 2009

I'd like to be able to graphically represent a position in a 3D graph and be able to rotate the grid to match a certain perspective. I've looked for tutorials online, but they all mention how to import or create common file types. I don't want or need to do this. I just need to know where to begin. I have the DirectX SDK, but I'm not sure where to start with it and need some direction.

View 1 Replies

Interface And Graphics :: Add A Scrollbar To Form?

Aug 12, 2009

How can I add a scrollbar to my form I tried the auto scrollbar option but is not working ??

How can I validate the user inpute inside a textbox to check that he type the desired word?? for Example validate if the user typed the word ( Bob)?

View 2 Replies

Interface And Graphics :: Automatically Changes Value Within Textbox?

Feb 17, 2009

how can i automatically update my value when a user changs the combobox item. At the moment i have a button click when the user changes the combobox item and press the button the values get updated, everytime the combobox item get changed i have to repeat it click the button to update the value. I want something where automitically as soon as the combobox item selected the total value in the text box to change without clicking the button:

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.SelectedItem = "Seafood" Then
TextBox1.Text = 3.5 * ComboBox2.SelectedItem
End If

View 3 Replies

Interface And Graphics :: Bar Chart/graph

Nov 30, 2010

I would like to include a bar chart in my program. My present tool box does not have that control. how I can include that control in my tool box.

View 2 Replies

Interface And Graphics :: Calling A Draw Sub?

Oct 27, 2011

I've been having some trouble with a draw subroutine in a project I'm working on. The last time I did anything like this in VB, drawing on a form was as simple as calling the Line() function, so I'm not clear on a lot of these things. Here's my code:

Code:
Private Sub drawBox(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles btnDraw.Click
Dim blueBrush As New SolidBrush(Color.Blue)
Dim i, j As Integer

[code]....

The code is just meant to draw a grid of small squares across the form, using the centers() array, which is set up elsewhere. My problem is that I can't figure out how to call this sub. If I use Handles Button.Click or Mouse.Move or something like that, VB returns an error saying that Draw and Mouse functions are incompatible. I can't call it normally, because I don't have values for sender and e.

View 2 Replies

Interface And Graphics :: Controls Not Displaying

Dec 31, 2009

I have inserted a form into my project that a friend sent over. The form works but if I add more controls to it they are not displaying.

The controls are all there in the <form>.designer.vb file but are simply not displaying when I run the form.

I have looked around the net but can find no reference to a similiar problem.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved