Interface And Graphics :: Minesweeper UI - Digitized Timer And Mine Counter
Oct 17, 2011
I'm beginning the process of trying to recreate minesweeper. See the attached picture of the version on my computer. My guess would be all the click-able locations are images. But notice the beveled borders around all the components, and how they separate the different section of the game. How would I go about created that? And what about the digitized timer and mine counter. Are those images too? I'm fairly new to VB programming (windows programming in general).
View 4 Replies
ADVERTISEMENT
Dec 2, 2008
I am running an application to control at 1, 10 and 100 Hz to compare their response for a control systems class. I have a timer that reads data from hardware, a timer that updates the screen and does the control, and a timer that writes data to a file. I've been having problems with the speed of the write timer, so I created a buffer.It takes 0 ms to load the buffer, and the buffer is written to file using a synchronized streamwriter and a thread every 100 iterations. It also flips back and forth between two buffers so there are no read/write conflicts.If I try to run at 10 Hz, the timer executes on average every 109 ms. If I try to run at 100 Hz, the timer executes on average ever 15-16 ms.
View 2 Replies
Nov 20, 2009
I've got this code which draws a line and it moves down to a point then two curves are drawn coming off of it. I need to get it to repeat itself after a short period, so there's a constant flow of lines moving down then becoming curves.[code]
View 3 Replies
May 6, 2011
I am using Timer Event in "Form1".By Running Timer Event i am getting data.
I want to STOP the Timer by clicking on Stop button.The Stop Button is in "Form2"
My Problem is When i click on Form2 Stop Button,the timer is still running mode.The Timer event is not going to stop.
I tested about Timer How to stop in sample appplication.In sample Application its working fine.When my Project application its not working(Timer not go to STOP)
View 8 Replies
Mar 11, 2010
I am planning to keep timer in the form to start from 1 and increment every second. This timer shiuld stop when the other events are triggered in the form (like clicking a button etc).
View 1 Replies
Nov 16, 2009
Im trying to make a counter/timer but cant get it to work,
i have a timer and a label
ive been trying to get it set to "00:00:00" Hours,Minutes,Seconds
It justs needs to keep counting up each time.
View 3 Replies
Nov 19, 2010
Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
[Code]...
View 3 Replies
Jan 22, 2011
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
[Code]...
View 3 Replies
Aug 14, 2009
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replies
Jan 12, 2010
how to create a user interface in a game such as the application XFire using Visual Basic?
View 3 Replies
Oct 19, 2008
I'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 Replies
Feb 19, 2009
I'm currently writing a countdown timer on vb 2005, with the following characteristics: When I press a button and the timer is running, it adds time to the counter, for example, if the time is 2:30 and I press a button, and the period to add is 1:10, the new time would be 4:40. The window is always on top of every other window, and is active even though it doesn't have focus. When the time's up and i press a key, in this case Esc, the application closes, otherwise, it just continues. [Code]
View 5 Replies
Jan 12, 2011
Ok, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
View 13 Replies
Oct 29, 2008
Using graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())
It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'
View 2 Replies
May 18, 2012
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 Replies
Apr 21, 2010
I'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
View 6 Replies
May 21, 2012
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
View 1 Replies
Jan 19, 2011
So I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.
When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.
View 1 Replies
Aug 1, 2010
Ok I have this: This makes a sub called 'graphicspaint' then writes "demo version" to a picturebox1
Code:
Imports System.Drawing
Imports System.Windows.Forms
[code]......
View 8 Replies
Dec 5, 2011
i whant do my own shadow effect. i can do the shandow. but how can i plus 2 bitmap images(1 above the other)?
View 15 Replies
Oct 28, 2011
I load my picturebox with a jpeg. If I put my DrawObjects() sub into picturebox paint event.When ever a picturebox.refresh or picturebox.visible = true (vb.net seems to draw my DrawObjects() first, then load the jpeg Image over my drawing - erasing drawing) Is there a way to get the picturebox to redraw the jpg image first then draw on it, in picturebox paint event?
View 10 Replies
Apr 4, 2011
Just want to know if it is possible to do an image mapping in VB2010?..
View 3 Replies
Feb 16, 2012
I am using Visual Basic 2005 for an Operator Interface in an industrial setting. Where should I be looking to help make my Operator Interface even more eye pleasing and practical?
View 2 Replies
Oct 4, 2010
I am having a datagrid in WPF application and I need to show the text wrapped in the cells. Basically I am reading from SQL server and displaying them in the Datagrid. Some of the fields having more than 255 character length and I want to show them as wrapped. To do this, I created my own style and trying to apply that to a data grid cell, but it is not working. [Code]
View 1 Replies
Apr 11, 2009
I'm considering working on a video encoding framework. Essentially a program to re-encode a video file from one format to another, using codecs which are widely distributed. (Codecs commonly found on the average PC.)Emphasis would be on reformatting - rescaling, cropping - in a visual environment. Is vb.NET a good environment for such an application or would it be wiser to look elsewhere?
View 4 Replies
Jun 18, 2009
I'd like to be able to graphically represent a position in a 3D graph and be able to rotate the grid to match a certain perspective. I've looked for tutorials online, but they all mention how to import or create common file types. I don't want or need to do this. I just need to know where to begin. I have the DirectX SDK, but I'm not sure where to start with it and need some direction.
View 1 Replies
Aug 12, 2009
How can I add a scrollbar to my form I tried the auto scrollbar option but is not working ??
How can I validate the user inpute inside a textbox to check that he type the desired word?? for Example validate if the user typed the word ( Bob)?
View 2 Replies
Feb 17, 2009
how can i automatically update my value when a user changs the combobox item. At the moment i have a button click when the user changes the combobox item and press the button the values get updated, everytime the combobox item get changed i have to repeat it click the button to update the value. I want something where automitically as soon as the combobox item selected the total value in the text box to change without clicking the button:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If ComboBox1.SelectedItem = "Seafood" Then
TextBox1.Text = 3.5 * ComboBox2.SelectedItem
End If
View 3 Replies
Nov 30, 2010
I would like to include a bar chart in my program. My present tool box does not have that control. how I can include that control in my tool box.
View 2 Replies
Oct 27, 2011
I've been having some trouble with a draw subroutine in a project I'm working on. The last time I did anything like this in VB, drawing on a form was as simple as calling the Line() function, so I'm not clear on a lot of these things. Here's my code:
Code:
Private Sub drawBox(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles btnDraw.Click
Dim blueBrush As New SolidBrush(Color.Blue)
Dim i, j As Integer
[code]....
The code is just meant to draw a grid of small squares across the form, using the centers() array, which is set up elsewhere. My problem is that I can't figure out how to call this sub. If I use Handles Button.Click or Mouse.Move or something like that, VB returns an error saying that Draw and Mouse functions are incompatible. I can't call it normally, because I don't have values for sender and e.
View 2 Replies
