i mostly use C and assembly, but i thought i would give VB.NET a shot. i used to use VB6 all the time, so wanted to see how different this is. in VB2010, i'm trying to modify the pixels of a Bitmap object and then make it show up in a PictureBox on the form. i get no errors, but this code does not show the new bitmap after it runs.."disp" is the name of the PictureBox on the form.[code]
View 1 RepliesPretty self-explanatory question. I'm trying to see if I can do sprite animation in Visual Basic and, while I can use a Graphics object to translate a bitmap down a few pixels, I have absolutely no idea how to erase the bitmap drawn in its former position. Is there any way to erase the old image before the new image is drawn onto the form?
View 14 RepliesWas just wondering if there is a way to quickly clear all pixels in a bitmap without creating a new one?
View 1 RepliesMy goal is to iterate through each pixel determining whether it is black or white. Ideally I want to do this one row at a time (so I can count the number of black pixels in each row). This is a bitonal image.I tried to get it started, but I don't understand what value(s) I'm supposed to be polling for. The following code takes a stab at it (i.e. makes a guess as to what value I'm supposed to check) and then outputs that value to a textfile.When I read the textfile, though, it doesn't look like anything useful.This code is an attempted modification of some code found in a CodeProject article.[code]
View 5 RepliesI have scanned a few img's on 600 DPI. When i load them into a Bitmap class They have Vertical and Horizontal Resolution of 96 PPI To my calculation that is very close to 38 Pixels per centimeter. Now the image that I scanned is 4.5 Centimeter (1.77165354 Inch) In Diameter but When I measure It the 4.5 cm img is close to 1080 pixel in Diameter which is 240 Pixels/Centimeter (609.6 Pixels/inch) What is the correct way to get the actual Pixels per inch/centimeter from a bitmap or was it set incorrectly by my scanner ?
View 7 RepliesI've been trying to mess around with image recognition in C# for some time now. But to do that, I need acces to all the pixels in the bitmap individually. At the moment, I'm using getPixel and setPixel. It works, but it's VERY slow. Is there any faster way to acces pixels in a bitmap? Unsafe code maybe?
View 6 RepliesI need to write a code to find identical adjacent pixels in a bitmap image. It should work as the 'magical wand' in Photoshop. My images are always black and white (white background with car parts drawed in black). Given the x,y coordinate for a single black pixel in the whole image, the code should find (and paint with another color, say red) all other black pixels that are linked to that one, and so on, until all linked black points will be painted in red.
[Code]...
I need to write a code to find identical adjacent pixels in a bitmap image. It should work as the 'magical wand' in Photoshop.My images are always black and white (white background with car parts drawed in black). Given the x,y coordinate for a single black pixel in the whole image, the code should find (and paint with another color, say red) all other black pixels that are linked to that one, and so on, until all linked black points will be painted in red.This way, suppose that I have an image with 4 car parts drawed, then if I give the x,y coordinate of a black pixel, just THAT part to whose the black pixel belongs to should be painted in red. All other parts will remain black. Does it make sense?At the end, there are two pictures (before and after) to help understanding what I need to do to the images.I tried a simple 8-pixel adjacent approach for every pixel (starting on initial coordinate) but it turns out into a very stupid and endless looping algorhitm.
Code:
Imports System.Drawing
Imports System.Drawing.Drawing2D
Imports System.Windows.Forms
[code]....
I'm trying to use a ToolTip directly to a Bitmap Object (System.Drawing.Bitmap), aparently I can't do this because Bitmap isnt a Windows Control.
View 1 RepliesI'm trying to make a -what i thought would be simple app.My intention was to build program that:1) i'd provide a grayscale image2) the program would count the black pixels the grey pixels the more grey pixels etc. (the hue) and the white3) would make the percentage sum of all pixels, that is: 300.000 black pixels (rgb 0 0 0) etc. given that 0 is the black, 100 the white. e.g a simple grayscale image is 55.2 white
This was my way and i don't think that is useful:
First of a button to convert the image to greyscale:
Dim bm as new Bitmap(source.Width,source.Height)
Dim x
Dim y
[CODE]...
Secondly, -and that's the stupid way- i did -or better i wanted to do- this: i put the code to dynamically create labels, each label having the colour of a pixel as background colour and as text the colour converted to rgb
The third step which i intended to do (i couldn't get pas two) was to sum up the labels etc.
I would like to use a loop to manipulate a set of objects on the form. This is like using a control array but not,... Here is some code to consider:
[Code]....
Am trying to debug an application written by someone else. The issue is we get an "Out of Memory" when executing the following code
[Code]...
i have drawn on a e.graphics object and now want to transfer the drawn stuff onto a bitmap object how can i do this?
View 2 RepliesI have 2 panels and what to run a command when they are a minimum of 30 pixels away from each other. Ive tried pnl1.intersectwith(pnl.bounds - 30) but doesnt work out
View 8 RepliesI've created a new bitmap object and am shading some pixels inside it black using the setpixel function. At the end I do:
myBlankBitmap.Save("D:3Didea_out.bmp")
Great. Except the bitmap that is saved is 32bit and won't open properly. I want it to be 8 bit. I can't find any options to change the bitdepth.
I have an application which take image from a folder through system, Io.filestream and convert it into bytes and store into database as byte data format and same I retrive from database as byte format and convert it into image into datagirdview. now I want to convert it into again bytes from datagridview. How to possible the value of image in datagridview into byte format.
View 1 Repliesmy goal is to copy the content of a picturebox, to a System.Drawing.Bitmap object, called tempBMP. but i didnt even use it i just tried to declare it there's an error: Object reference not set to an instance of an object.
here's my
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim colors(sizeX - 1, sizeY - 1) As Color
[Code].....
i am drawing a string to a graphics object in the eg below and then transfering it onto a e.graphics in the paint event of a panel... when doing this the font edges appear dodgey...
Here is some
Dim b As New Bitmap(100, 100)
Dim g As Graphics = Graphics.FromImage(b)
g.DrawString("Bla Bla Bla", New Font("Comic Sans MS", 18,FontStyle.Bold), New LinearGradientBrush(g.ClipBounds, Color.Red,
[code]....
I'm using Bitmap to show picture box like slideshow using Timer. For each timer interval, I've to go for new instance of Bitmap, there System memory increases to 1MB, How to resolve this, 'BG is picture box
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tic Dim img As Bitmap
img = New Bitmap(System.Drawing.Bitmap.FromFile(FileIO.FileSystem.GetFiles
[CODE]...
how can i create a monochrome bitmap from a semi transparent bitmap in vb.net? the bmp is for a transparency mask image for an icon i'm trying to create with the CreateIconIndirect API function.
i'm using vb2008 .Net3.5, but i would prefer an answer that would also work in vb2005
Here is a short program to demonstrate my question. I just want to extraxct a rectangle bitmap from a big bitmap.Code as follows:
Private
Sub Button3_Click(ByVal sender
As System.Object,[code]....
Execution stops when hitting the Dim cloneBitmap statement, which should have created a bitmap out of the rectangle cut out.The message is:
"MissingMemeberException was unhandled.
No default member was found for type 'bitmap"
I just don't get it. Seems that the method Clone(Rectangle, PixelFormat was not found.
I have a grass image located here in my directory. I want to just create a Bitmap, but I am getting an error. (Parameter is not valid.) Immediate Window: A first chance exception of type 'System.ArgumentException' occurred in System.Drawing.dll
[URL]
private void Form1_Load(object sender, EventArgs e)
{
Bitmap bmp = new Bitmap("grass.jpg");
}
bertino
i have a problem with the Size in VB.Net I think the Control Size in VB.Net Is Pixels so I want to enter this size cm/inch
I want To Convert Pixels to cm/inch or cm/inch to Pixels
The code below reads an Icon from an .ico file, converts the Icon read to a Bitmap and saves the bitmap using:
Bitmap.Save(PathA)
Then does:
PanelShowWrittenIconA.BackgroundImage = New Bitmap(PathA)
[code].....
How would I turn single images into animated gifs and vice versa? Is there an existing library for such a thing?
View 1 RepliesI'm trying to design a game using vb.net window application, my game is sokoban, a logic game where the character pushes boxes to the destination.I have already programme my picture to be move by my direction key, I trying to find out if it is possible for picture box to push picture box like when the character(a picture box) move to the box(a picture box too), the box will move also. and also the logic for creating obstacle for the game, as the picture that i have programme can move beyond the page, I'm trying to lock the obstacle in, so when i move the picture, it will be block by the picture box.
View 6 Repliesi'm creating a game like text twist. that when i press letter a, i need to determine which picturebox contains letter a and display it to different location. that also goes to the proceeding letter a's. for example, i have a jumbled letters "aamba". in my code, it only gets the first letter a and removes it form the screen, it's nowhere to be found. and it won't recognize that i still have other letter a's i'm pretty sure about the location that i set it to be placed.here is my
(it's kind of brute force i think)
ElseIf e.KeyChar = Chr(97) Then
counter1 = 0[code].....
I need to be able to read audio files and manipulate them from within my own program (similar to how Audacity does it). Now, I'm not asking for something with a thousand effects and such, I just need the minimal as far as audio manipulation for .net goes. I really just need to be able to figure out pitches and frequencies being played at what times and the ability to move them all around.
View 1 RepliesI'm creating a program that displays data from a Access database in DataGridView, and I'm able to "call" the database and display it in datagridview normally, but I need to be able to take the data from 3 separate columns and average them together, within VB.
My table basically displays 3 grades for a student, one column for the student's name and the other 3 columns for 3 separate grades, I need to be able to take the 3 grades from the same row and average them together, then display them in a separate column within DataGridView.
Here is my code so far, but this only displays all the records without the average:
Quote:
Public Class Form1
Sub UpdateGrid(ByVal sqlStr As String)
Dim dt As New DataTable()
[Code]....
I am using the Print Document to create the impression in vb.net...Anything I set a certain number of records per page however see the other pages just like the first,some help to handle these records correctly in the leaves?
View 4 Replies