Actually i'm doing my assignment on Vb interface... Parking and Retrieve System.. the problem is, i don't know how to save the input inserted by user (displayed in display2.text) into any memory in vb..
Example: if user key in "abc123", then how can i save the data into vb memory repeatedly? is it possible for me to use "savedialogfile"?
Here is my code:
CODE:
I wrote a program which has 4 different menus. Each menu does some kind of calculations by first read numbers from binary image file and then writes the output file. I was wondering if I could output or write to memory instead of outputting to a file.
If that is possible then I think I could do all with one click instead of using 4 different menus (or forms).
I have a class as follows:
Public Class Courses
Public CoursesOfferedMAIN As New List(Of Category)
Public CoursesList As New List(Of Course)
[Code]....
There is no problem with the code how ever, I would like to know, in the process I am following, the number of subjects, couses, examsets etc would all get repeated in the specific type lists like SubjectsList, examstypelist etc.. since they are being copied over it would take more memory.
Hence, my question or doubt would be, is it possible to use the same as references instead of copying them over to lists to save memory, or are there any methods better than this?
Im trying to make an advance chat room with some cool features.
How would i save an image in memory from a stream?
I'm trying to do an application for a HTC viva PDA, and i'm a begginer in visual basic programming language so i don't understand much of it.The application is intended to receive data from a data aquisition equipment that connects with the PDA trough bluetooth, i managed to receive data in the PDA, but i don't know how to save all the data that comes from the data aquisition device in a Microsoft excel format or in any other format i can work with.the code that is needed so that the software saves all incoming data to a excel file in the memory card of the PDA?
View 6 RepliesI have a VB.NET user control that is saving a PDF document and then displaying that in a WebBrowser control. The code looks like this[code]...
View 2 RepliesI'm basically making an app to take screen shots in a game as I chat. There will be a bit more to it later, and I will likely be using PNG but that is besides the point for now.Whenever I take a screenshot and save, doesn't matter If I am saving converting quality or using system.drawing directly, the memory use goes up about 1.5MB per save. I'm rather new to VB.Net so I can't really figure out why...as far as I can tell I release everything.[code]Ihave tried setting it to nothing with no luck, and aside from that memory slowly goes up per time Enter is pressed. I'm not sure why data would be saving to memory when Subs and Functions are supposed to release data after use?
View 1 RepliesI have written this code for my class. I just can't figure out what is wrong with it. What the program does is set a random number in memory then a guessing box input tells if it is too high or too low or correct. I set it up so the min and max numbers can be changed. What am I doing wrong. You don't even have to tell me the code I just want to get it working
Public Class Form1
Dim randomObject As New Random()
Dim random As Integer
[CODE]...
Using VB.Net
Database Form
Server Name, Username, Password - textbox
SQL Authentication, windows Authentication - checkbox
I have Database Form, First Time i run my software, I have to give Server Name, Window or SQL Authentication mode, UserName and password. Next Time I run the software, given data's like Server name, username, password, window or sql authentication should appear in the form. Before I used VB6, I used the ini file for getting the username, password and servername.
vb6 code.
Dim File As String, OFLen As Double, str As String
File = App.Path & "SQLServer.ini"[code]....
There is any option is available in the vb.net for saving the data's or i have to use the same format(ini file) in vb.net
I want to be able to save all the vaules that the user has put in the two text boxes.[code]...
View 2 RepliesI am coding a program and I want it to save what the user types in for next load up.So for example...
User types 'hello' in texbox1
User closes program.
User opens program few days later.
User sees in textbox1 it says 'hello'
I AM NOT GETTING HOW TO SAVE DATA WHICH I ENTER ON THE TEXT BOX IN MY MAIN FORM TO THE DATABASE IN THE BACK-END WITH WHICH I HAVE DONE CONNECTIVITY.
I WANT THAT ONCE I CLICK ON THE "SAVE" BUTTON, WHATEVER I ENTER IN THE TEXTBOX GETS SAVED IN THE TABLE IN THE DATABASE.....
this application I'm writing is for Employee Data. I have 7 texboxes and 1 combo box.With the file menu I have used that function to save info inputed in one texbox. However for this application I need to use btnSave button to save the record.
here is what I used for the file>save menu:
Dim result As DialogResult
'find input file
With OpenFileDialog1
.Title = "Find Input File"
[code]....
How can I implement this with a button?
I have a form with 12 text boxes that a user must fill. I need then by pressing a button to promt for the save directory and save the input as ".".txt file. Moreover i need each line of the txt to correspond to each one of the txtboxes. So the input to the first box will be the first line of the txt file,...the input of the ninth box the ninth line of the txt file.
View 15 Repliescan I convert the input in the text box and save it into database in pdf file?
View 8 RepliesWhat i'm attempting to do is have several textboxes where the user input's there information and a seperate text box to give there input a name so it can be sent to a combobox and saved with my.settings so when the program loads or the user needs the textboxes populating they can select the name in the combobox and it fill out the textboxes.
[Code]...
conn.Open()
myCommand.CommandText = "INSERT INTO recipeformula (prod_id, prod_name, mat_id, mat_name, mat_no, unitmeasure) VALUES ('" & TextBox2.Text & "', '" & TextBox1.Text & "', @a1, @a2, @a3, @a4)"
myCommand.Parameters.AddWithValue("@a1", SqlDbType.Int)
[code]....
Is there a simple way to save user input from MANY controls (textboxes, comboboxes, etc...) to a text file? When I say 'MANY', I am referring to at least 580 textboxes and several dozen comboboxes.
I may be able to accomplish this using the StreamWriter Class, but doing this individually would take quite a long time. I suppose I could also change all text boxes to richTextBoxes and save to .rtf. It seems like this would be even more time consuming.
Surely there is a simpler way to do this 'globally', perhaps with an added single line of code that points (and saves) to a preset or created text.txt file whenever text is added or changed in a textbox or combobox throughout the program.
how do i code this. my textbox length is 5 and i input only 2 numbers and i want it to save in textfile as 5 Digit ex. i input 2 number in textbox and should be save it as 00012 how can i code this?
View 4 RepliesI work in an engineering design house and programming is not my actual profession. And I am relatively new to VB .net (previous i had worked in vb 6)
I am working on an in house application. I am coding a simple application in vb .net. This applications takes a few inputs from user and calculates a result. Now I want to implement a simple functionality that user should be able to save the input and results just like most of the windows programs can in a new file format. And user should be able to open the save file when desired.
In VB 2005, I am calling a C++ DLL function that returns the address in memory and size in bytes of a jpeg image. How can I load that jpeg image directly from memory into a picture box in my VB form? I cannot afford to save it to disk first.
View 10 RepliesIm getting a problem with one of my programs I have made in visual basic.NET where it gives me a memory error when i debug the program in the IDE. the exact error is this: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". My program basically has a few forms with text fields on that get their text values from an access database on the same hard drive. Im wondering if im doing something wrong because my program just seems to eat up memory whenever it does anything. For example I have one form that has a combobox on it and when you change the drop down list selection it retreives a few strings from the database and puts them into the relevant text boxes, if you keep changing the selection then the memory usage (in task manager) just keeps going up and up. occasionally I get the error mentioned above when debugging but in my built version of the program it throws an exception everytime the memory usage gets past 49K.
Also I noticed when debugging in the "immediate window" frame I get the following message often:A first chance exception of type 'System. Invalid OperationException' occurred in System.Data.dll...Do I need to somehow be "releasing" the memory that is used to gather data once it becomes redundant?
I am using the following code
This error occurs :
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Public Class FormRegEnumValue
[CODE]......................
QuoteSystem.AccessViolationException was unhandled Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Source="System.Windows.Forms"
Im designing a web browser and i continue to receive this error after going to about 3 websites it crashes with that error.
I have a BackgroundWorker object that I instantiated to perform a DB process on a background thread ansynchronously. I have event handlers for DoWork and RunWorkerCompleted. I can tell that the BackgroundWorker is disposing of itself because I added a message box into the Disposed event handler.Is it necessary to detach the event handlers to ensure that the memory is cleaned up and that there are not memory leaks?
View 1 RepliesI've noticed that every time I start a new thread in my program, the memory usage jumps about 1000k and it never goes back down. I have ensured that the thread is no longer running, and only one instance of my worker thread is ever running at a time. I am using ThreadPool.QueueUserWorkItem and ASyncOperation to get stuff done. The program starts using a Sub Main in a module that uses STAThread; I read that using STAThread instead of MTAThread makes it impossible for the Garbage Collector to get in and consider objects for garbage collection. However, when I change the STAThread to an MTAThread, the WebBrowser control in my frmMain cannot be instantiated.
I get this exception:
Code: An unhandled exception of type 'System.Threading.ThreadStateException' occurred in System.Windows.Forms.dll
Additional information: ActiveX control '8856f961-340a-11d0-a96b-00c04fd705a2' cannot be instantiated because the current thread is not in a single-threaded apartment. I do threading with the WebBrowser control, so will using MTAThread fix my problem? If so, how should I partition my code so that the WebBrowser control won't be affected by the above exception? I call the thread repeatedly with a timer (although only one instance ever runs at a time), and my program's memory usage starts at about 5000k and can jump to 300,000k+ depending on many times the thread needs to be called.
I cannot use Visual Basic 2008 at all. When I go to "new project" and choose "Windows Form Application" I get this error.I have tried multiple uninstall/reinstall with no result.A microsoft reply to this suggested that I needed: " .NET Framework 2.0 Service Pack 1 " I checked, and I did not have the .netframework 2.0 service Pack 1.
When I tried to download and install the above from Microsoft.com, the istaller said that "it was not allowsed" and I was not able to install the service pack 1.
I tried Uninstalling net framework 3.5, 3.0, 2.0 and then reinstalling .netframework 2.0 sevice pack 1; then reinstalling Visual basic 2008 express edition. At the reinstall of Visual basic 2008, .netframework 2.0 sevice pack 1 is unistalled by .net framework service pack 2.When I check the foruims for simiar problems, the formus are mostly for Visual basic 5.0, or other programs that I do not have.
Here is the programs I have installed:
Operating system: Windows XP
Microsoft .net framework 1.1
Microsoft .NET framwork 1.1 Hotfix(KB928366)
Microsoft .Net Framework 2.0 Service Pack 2
[code]....
All the security updates and hotfixes for Widows XP.
The follow code can be called about 6K times on the server it is run on then gets a out of memory error in the last catch statement. I don't see what is wrong with the code, it works well up until the out of memory..
Public Function AddUserToGroup(ByVal sSamAccountName As String, ByVal sGroupName As String) As Boolean
Try
Dim returnStatus As Boolean = True[code]......
I have two forms, Form1 and Form2. Form2 has a button to show OpenFileDialog. I call Form2 from Form1 by a button. My startUp Form is Form1. When i start debugging, i press my Form1's button to show my Form2, it shows, but when i click On Form2's Button to show OpenFileDialog it is giving me exception that
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
When i set my startup Form to Form2 and click Form2's Button to show OpenFileDialog then it shows!
I am trying save a value from an input tag in some HTML source code. The tag looks like so:
<input name="user_status" value="3" />
I have the page source in a variable (pageSourceCode), and need to work out some regex to get the value (3 in this example). I have this so far: [Code] Which works fine most of the time, however this code is used to process source code from multiple sites (that use the same platform), and sometimes there are other attributes included in the input tag, or they are in a different order, eg:
<input class="someclass" type="hidden" value="3" name="user_status" />
I just dont understand regex enough to cope with these situations.