TextRenderer.DrawText Rectangle Area Offset For BorderStyles

Dec 5, 2010

Drawing text on a picbox I notice if the picbox has a border style set then the TextRenderer.DrawText rectangle area needs to be adjusted slightly otherwise text may be drawn very near the picbox borders and the text doesn't look as clean, but I'm not sure what those offsets should be, I hard coded them in, see code under "' area to draw". btw, the code draws the first word of text in bold and then the other words as regular. 'One button, One picture box needed.

[Code]...

View 2 Replies


ADVERTISEMENT

VS 2008 TextRenderer.DrawText In PrintDocument PrintPage Event

Dec 7, 2010

I want to use the added functionality (for word wrap etc) of the TextRenderer.DrawText method.... but this does not seem to work correctly on the Graphics object in the PrintPage event in the PrintDocument Object and does not take into consideration any transformations that have been applied. Does anyone have a replacement way or workaround for this?

View 1 Replies

C# - Enable Me To Render Rotated Text With The TextRenderer.DrawText Method?

Oct 6, 2010

I'm using some code to enable me to render rotated text with the TextRenderer.DrawText method. (By default, DrawText can only copy a straight forward x and y transform from a graphics object).

The code (C#) is from: connect.microsoft.com. See below for a VB conversion.The code takes a graphics object, creates a device context and copies the transform matrix from the graphics object. It works, but I'd like, also, to set the TextRenderingHint, so I tried:

<DllImport("gdiplus.dll", CharSet:=CharSet.Unicode, SetLastError:=True, ExactSpelling:=True)> _
Public Shared Function GdipSetTextRenderingHint(ByVal graphics As HandleRef, ByVal textRenderingHint As System.Drawing.Text.TextRenderingHint) As Integer End Function And then after the SetClip statement, I place: GdipSetTextRenderingHint(hDC, someHint) This gives me a memory access violation error, so I think I should be using something other than hDC as the argument.

I can get it to work by creating the device context from the original graphics object, and then creating another graphics object from the device context. I then set the hint on the new graphics object. This seems a bit convoluted so I was wondering if it was possible through interop.

[Code]...

View 1 Replies

Get The Lines Of Text In An Array Where TextRenderer.DrawText Will Line Break?

Apr 27, 2010

basically i am doing something like:

vb

TextRenderer.DrawText(g, mc_Text, MyBase.Font, New Rectangle(Padding.Left, Padding.Top, MyBase.Width), MyBase.ForeColor, TextFormatFlags.WordBreak)

And want to get an array of lines where the text breaks with since TextFormatFlags.WordBreak has been set

View 3 Replies

TextRenderer.DrawText To Bitmap With ClearType And Color.Transparent Background?

Sep 28, 2008

The following code does not appear to draw text properly to the bitmap. The text is rendered bold and anything but "clear". Can someone please help? I've searched all over the web for a solution and have not been able to locate one.The Code:

[Code]...

View 6 Replies

List(of Rectangle), Rectangle.offset(x,y) Doesn't Work?

Jul 26, 2010

i've got a little problem with List(on T) variables.

[code]...

It works perfectly fine. Does anyone know what the problem is?

View 2 Replies

Make Customized Borderstyles, Create 'raised Area' Looks?

Jul 12, 2010

I've been working with System.Drawing for awhile and like to think I have a good handle on it; I've created classes that draw grids, write text in gridboxes and rectangles, convert rectangles to circles, fill areas with color, etc. What I don't have is any sense of artistry at all, and I don't have the slightest clue how one would use System.Drawing to draw a rectangle and then color/slope the edges so that it looks like a System.Windows.Forms.Button would, or how to make it look like it's inset deeper than the surrounding Form, like setting a Panel's BorderStyle to Fixed3D.

View 3 Replies

Finding Area And Perimeter Of A Rectangle?

Sep 8, 2009

OK, so I just started this VB programming class at school. But I don't understand much because the teacher doesn't really teach us. He just types everything on the projector and expects us to keep up. We have this project in which we are supposed to build a form that accepts the length and width of a rectangle, and calculates the area and perimeter of the rectangle. CAN SOMEBODY PLEASE HELP ME?? I really have no clue how to do this, and more than half the other people in our class don't either, so finding help within the class is pretty much out of the question.

The user enters values for the length and width of a rectangle and clicks the Calculate button or presses the Enter key to activate that button. The application then displays the area and perimeter of the rectangle in the third and fourth labels on the right side of the form.

Specifications The formula for calculating the area is width * length. The formula for calculating the perimeter is 2 * width + 2 * length. The application should accept fractional decimal entries like 10.5 and 20.65. Assume that the user will enter valid numeric data for the length and width.

View 39 Replies

Ake Image Under Rectangle To Be Clear And Outside Area Translucent?

Mar 27, 2011

I am currently working on image cropping software. Any idea how to make image under rectangle to be clear and outside area translucent?

View 5 Replies

Find The Area Of A Circle Which Is Inside A Rectangle?

Jun 24, 2011

I'm writing a .NET program for an engineering company. Their specification is to find the number of holes (either of same or different radius) on a rectangular plate and then to find the area of the rectangle and also area of the circle inside that rectangle. It's not essential that the circle touches the rectangle.

View 1 Replies

Interface And Graphics :: Make Image Grey And Rectangle Area Colour

Jan 26, 2011

I am using the following code to place a rectangle around a form / form control, however what I want to do is make my screen grey and only the form / form control area be displayed in colour.

Code:

I have googled for ages trying to find something on this, but with no luck.

To illistrate this better they are using the same functionality in snagit 10, please see below link to a page that has a video link showing this (23 sec into video)[url]

View 4 Replies

Make A Program That Will Calculate The Area Of A Rectangle Based On The Length And Width Given By The User

Nov 20, 2009

im trying to make a a rogram that will calculate the area of a rectangle based on the lenght and

width given by the user

[code...]

View 4 Replies

How To Find A Specific Offset Where Text Is In Hex, And Search For The Offset

Jul 2, 2011

How to search a dump.bin for a pattern then take the offset it is at, i.e. 8DB358 and search that string as hex? Here is an example of what was being done without a program for it:[URL]..I'm making debug codes for a gaming system... I'm Using visual basic 2008 express edition on windows vista

View 1 Replies

Identify Subtriangle Within A Rectangle Given A Coordinate In That Rectangle?

Feb 22, 2010

Given a rectangle of width w and height h. and a coordinate x,y in that rectangle I would like to identify which triangle I am within.

i.e. the function should take parameters(x,y) and return a,b,c,d or a zero based number representing that triangle index i.e. (0=A,1=B,2=C,3=D) if they are in that order.

I think this would be something like >= the formula of the red line and >= the formula of the green line?

I'd like to implement this in VB.NET

View 3 Replies

Use DrawText To Draw End Of A Text?

Oct 22, 2011

Is TextRenderer.DrawText() capable to draw the end of a text when destination rectangle is too small?

TextFormatFlags.Bottom didn't helped me.

In others words: how to clip text on its top edge?

View 1 Replies

Set The Viewable Area To A Smaller Screen Area?

Jun 11, 2012

Trying to set the viewable area to a smaller screen area and have it cycle through as the person moves using collision detection to move the backgroudn image. Here is the start but its off to a bad start so far.

Public Class Form1
Dim Mapx As Integer = 600
Dim Mapy As Integer = 2000

[code]....

Basically the forum size is set to 600x2000 but the client should only allow you to view 600x600. I want it to add +1 once you "collide with a invisable box I'll add and this will redraw the screen.

View 4 Replies

Specify Actual Usable Form Area Instead Of Outside Area?

May 12, 2010

I designed a form and managed to fit graphics inside it. Picture box is 465 pixels high. Form1 is 500 pixels high. SnapShot of the screen verifies that the 500 pixel height is the overal height. It includes the upper Bar and lower frame. Is there an instruction to set the From's inner pixel size and not overal?

View 2 Replies

Graphics.MeasureString Is Different To TextRenderer.MeasureText?

Oct 10, 2011

why Graphics.MeasureString is so different to TextRenderer.MeasureText?

vb

Dim SizeG = e.Graphics.MeasureString(New String("i"c, 100), New Font("Microsoft Sans Serif", 8.25, FontStyle.Regular))[code]...

I realize that one returns SizeF and the other Size... but the results are over 50px different in the width ?

View 3 Replies

Draw Rectangle Divided To Four Rectangle?

Dec 3, 2011

This code is to draw rectangle. How can I draw rectangle divided to four rectangle or more

e.Graphics.DrawRectangle(Pens.Coral, 50, 200, 30, 40)

View 11 Replies

Drawing Rectangle Inside Another Rectangle?

Jul 26, 2009

I'M creating a kind of photo viewer, and I cannot figure out how to orient the scroll buttons with the photos I want to draw because they all are different sizes.This is really hard to explain so please ask questions if you don't understand.I'M thinking if i could draw every photo on a single rectangle and then the scroll bars will position that rectangle up or down. but is there a way to make a rectangle inside another one so it only shows inside that rectangle?

View 10 Replies

DrawText On Image With 90 Or 180 Degrees Format In Windows Based Application

Dec 13, 2010

How can i draw text(demo demo) with 180 degrees format on exist image(on photo) in windows based applicaiton using vb.net. (Here rotate text(demo demo is displaying text on exist image) with 180 degrees formate then display on exist image)

View 11 Replies

Get Offset Of A Line?

Jun 7, 2011

how can i get offset of a line in a text file?using this offset i can go back to the same line using Streamreader.Basestream.Seek(offset,SeekOrigin.Begin)

View 1 Replies

How To Get File Offset

Jul 27, 2010

Can anybody tell me how to get file offset.In FileStream object when u call write method it wants file offset

fs.Write(System.Text.ASCIIEncoding.ASCII.GetBytes(Yourdata), 0, System.Text.ASCIIEncoding.ASCII.GetByteCount(Yourdata))

Instead of 0 i want existing file offset

View 1 Replies

How To Get Offset Of A Line

Jul 26, 2011

how can i get offset of a line in a text file?so using this offset i can go back to the same line using Streamreader.Basestream.Seek(offset,SeekOrigin.Begin)

View 3 Replies

Get The Current Offset For Various Timezones From The OS?

Oct 31, 2011

I have an app with clocks on it from around the world. It's used in multiple locations around the world as well, some that observe DST, some that do not.

Is there some way to get the current offset for various timezones from the OS? My preference would be to simply use the OS to GET the offsets, thereby relieving the program of having to figure out the dates and when to reset the clock. That would eliminate the need to be concerned with DST altogether; the offset values could simply be added to the current datetime.utcnow. I'd need to get the offset/current time for Hawaii, Pacific, Mountain, Central, Eastern, UK, France, Germany, Mumbai, China and Australia time zones.

TimeZoneInfo.GetSystemTimeZones can get at some of this data; is there maybe a way to cull it out of that?

View 13 Replies

Read Specify Offset On File?

Aug 16, 2011

I have program that can read the information on the file, its will read on offset 4 and will read next offset 300, so the program will read offset : 4 - 304 - 604 -> 904... and the program will add the binary to the listview, here my code to read it:

Private Sub ScanLevel()
Try
Dim path As String = OpenFileDialog1.FileName

[Code].....

View 1 Replies

Using The Offset Property Of Scroll Bar?

Jan 12, 2011

In my vb.net project, i am using tab control and some DGVWs, command buttons. i use to dynamically place these controls into a tab page and set the autoscroll proprty to true. once the scroll bar grown and when i try to scroll down the bar to view the bottom most controls, the scroll bar automatically retriving back to its original position. i have to click 2 or 3 times in the bottom of the tap page and scroll again to view the bottom most control. i am unable to figure out using the offset property of scroll bar.

View 3 Replies

Interface And Graphics :: Dynamicaly Center Multiple DrawText "Labels"?

Feb 23, 2010

I've drawn a graph where each gridline represents 15 minutes. (Every 4, 1 hour of time)The resolution is 100 dpi per inch. Each column is 12 DPI. (Not very big)Each gridline can have zero to multiple "Lines of data" which must be centered under the associated gridline using a vertical transform. (Each drawtext label represents an event that happened at that point in time)This I can figure out. The problem is that there can be 3 labels at 3:00AM, then another 2 labels at 3:15 AM with more labels as time progresses through the day. If each "label takes up 24 dpi of space, I need to center 120 dpi of data under 12 dpi of space.(Drawing the lines from the gridline to the associated data should not be an issue depending on how the "label is centered)How can I center all 5 labels at runtime. I've considered an array but each time a "label" is added, I would have to recaculate each labels position. Besides that, how can my program recgnize that the data it is coming up to (data is read one line at a time) is a group or how large the group is?

View 17 Replies

Calculate Relative Time Offset?

Oct 13, 2010

I was reading this article about relative time calculation

The problem is that the results are wrong due to the time offset. My webpage is Greek.So how should i modify that function to work correctly, including the GMT+2 or GMT+3 hours offset?

View 2 Replies

Compare Offset Lines Richtextbox?

Mar 4, 2010

How can I get the sum from richtextbox, starting at line -1 ? But the first line should compare with line1.This code adds a constant to all lines and passes the sum to another textbox.

Dim num1 As Single
Dim sum As Single
Dim Constant As Single = Val(txtLowerTol.Text[code]....

So a third textbox should sum with one line "offset".

View 6 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved