When Add A Data A Form Will Appear And Add Data's And Save
Dec 16, 2010
I have a user control that contains the data grid.When i add a data a a form will appear and add data's and save.so here it is..Whenever i save the data i wanted the information to be loaded on the datagrid(UserControl form)I tried this method and still nothing happens. [code]
I have a form with a group of text/cbo boxes, and two listview controls. I would like to save these textboxes and listviews into a single xml doc with a schema like[code]...
How Would i make a login form that will save my data to form 2 like i sign into form1 and it saves like my username/email and password from form1 to form2
Its suppose to save the stuff written in the texbox for example
I have to input 255 students Name, address, age and Birthdays and save them all and then try to find all of the info stored by entering the Name.
Also i have to generate a student Id not just giving a Id to them so for example if the first student i enter his ID # should be 1 and so on as i enter the name
How to save a data i entered in vb form into .txt or acces db, for example i have a form, and there is some text box in that form, then i write a text in that TextBox then i save all into txt file or Access DB, and i can open or load that file into my aplication. i use SaveFileDialog but how to make i can chose a file type to save it?
Below is a project that I am creating and with it is a listview table with name and telephone number I can add and remove contacts no problem that part is solved
What I am trying to solve the problem to is how to save that data once the form is closed and be at the same point when I close the form'[code...]
[Code] Private Sub SaveFileToolStripMenuItem1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveFileToolStripMenuItem1.Click Dim MyStream As Stream Dim SaveFileDialog1 As New SaveFileDialog() [Code] .....
I wanna save the data present on the form to the text file.I am using vb.net for this. how can i write the text present on the form in the same formate (showing on the form) in the .txt file.
Im new here and hoping that I post this in the right forum. I am SLOWLY learning VB, and have run into a problem that I cant figure out. I have a standard form that you can enter data into.I want to take that data that is entered, and save it to a text file once I click the submit button at the bottom of the form. The form could have up to 500 entries into the form.
This time, basically, i'm working with Random Access Files.I have this et of code to read data from a form a save it into a .dat file. This works fine.
Public Class frmDramaClub Structure MemberRecord Dim ID As Integer[code].....
I've written a very simple program that writes a tiny "config.cfg" (text) file to the computer (using StreamWriter), and a second program that is supposed to read that data back.
Unfortunately, it appears you can't save to the same folder as your program under Win7 ("Program Files (x86)" is a restricted folder.) So instead, VB automatically saves my data to the "C:Users(myname)AppDataRoaming..." folder. This is annoying, but tolerable.
PROBLEM IS: How does my second app then FIND my data file (without doing a time-wasting drive search every time the program is run?)
My code:
' Program #1: Private Sub cmdSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSave.Click Dim FileWriter As New StreamWriter("config.cfg")
I have two windows vb.net form. I got a text file. I am trying to encrypt some data and save it to a text file with the 1st windows vb.net 2005 form. Now with the second one am trying to decrypt the data and retrieve it here.
I have a scheduling program here that shows you a calendar and let's you double click a time to open another form where you input the meeting information. When I click save it saves the person's name to the calendar view, but no details when I double click the entry again. What would be the best method of getting the other fields to save so they're there when I double click? Should I just somehow assign them to strings and return them in the right text box or would I need an array?
EDIT: Actually there is a database involved so I guess I have to get it to store the info in there first.
how to code for the save button in vb.net datagrid view by using insert into sql and update sql statements (it should be able to insert & update the data grid and save the changes) when the save button is clicked .
I have just started with vb and would like to know if there is a way to input several boxes of data on one form and display individual pieces of that data on several other forms at timed events in the future?
Currently we are using a VB script macro created in word to create some fairly simple forms based off of data entered on a data entry form. I am very new to VB, and I have been able to create many applications using forms, but I have absolutely no history creating reports. I have been reading up on the reports, and it looks like they are designed to use with data sources like tables. I merely want to take either data from the entry form, or from data derived internaly from processing the user entered data and populate a defined report "form". I have been searching, but there is so much on printing reports, that I feel overwhelmed. I am not looking for the exact answer as much as a link or place to look for a sample for what I want to do.
I am working on a huge multiform project for my company, and one of the few issues I am having is that when I am on the Main Menu Form, then go into a specific form (i.e Sales Order, etc.), do updates, changes, or just view data then close the Sales Order Form, if I happen to go back into the Sales Order Form without closing the entire project, then the Sales Order Form will display data instead of opening a blank form like when I first opened it.
Is there something that I should be adding to the Form Close Event to dump all of the data or refresh the data adapters so that if I open the form again, it will display a blank form that is ready to be used like when I first opened it?
I have tried using; Me.Dispose() Me.Close()
when closing these subforms, but if I open them again, the data fields (combo boxes and text boxes) will have random data in them.
I have a listbox in my form that gets its values from a data table by data binding. My question is, when the data (row) is loaded it also selects the first line automatically. I do not want this because I want the listbox to select an item only when the user clicks on it. Otherwise, the iteme should ony be listed. Is there a way to manage this?
I have a simple windows form that i would like to send the values of a few textboxes and comboboxes to an rdlc report after saving them (I have VS 2005 standard, so no crystal reports) - it's as follows:
the textboxes are labeled length, width, height the combobox is labled unit of measure and contains two options - inches or centimetres the label has text of "your total cubic inches/centimetres is:" - followed by the unit of measure selected.the buttons are labeled save, calculate, print, print preview, and exit.Having said all of the above, the save, calculate and exit button code is easy enough and is good to go - it's print and print preview i'm stuck on the solution i'm after is to take those values and send them to an rdlc report that immediately prints (calls up the default printer dialogue) without preview or anything when the print button is clicked and also have a print preview function as well for when of course the print preview button is clicked.The report has already been created with the titles mentioned above..
I have two data tables within my data set that are loaded onto my form on form_load using statements written in code (not the designer. When I change a value for the first table via a text box the change is made to the data set. But when I try the same for the second table, the change doesn't remain in the data set when I switch to a different company and come back. I query the second table using the primary key of the first table but no code is needed when I change the values for the first table so I don't understand why the same doesn't work for the second when I change a value via a data-bound text box....
Here is my code that initially binds the data:
'This is used to read our data from the data base Public Sub Read_Data_SQL() Call Clear_Bindings()
[CODE]...
Here is the code I call when the selected index of my company combo box changes to have the second table reflect that of the first:
'This sub populates any information contained in the Contact2 table Private Sub Update_Contact_2()
Dim Company As String = cmbCompany.Text.Replace("'", "''")
in my form i have 4 textboxes and i want all not to be empty while saving the data.I have put condition in save button,when user presses the save button to save data, to check all the textboxes not to be empty. My question is that, i want to focus to that particular textbox which is empty during saving the data.
For example: i have txt1,txt2,txt3,txt4 as textboxes in the form if txt1 is empty while saving, the focus should switch to txt1 rather user himself have to go there.
I have a form with a listbox that when the form is opened I need it to display info from a file. I don't know what would be easier to work with Excel or a txt file, but it is in this format:
Phillip Frank 3/19/1990 3 999-555-8618[code].......
I would like it to populate the list box when the form is loaded, but if I have to use a button to tell it to load that is fine also.On the same form I have 4 textboxes that ask for each of the above items (name, DOB, Level, PH#) and a button that when pushed I want it to save it to the same file where the above info was pulled from in the same format.The Show Contacts button doesn't have to be used if it is not needed.
i want to know that when im adding my data in form after loading one person data then 2nd person data the 2nd person data cannot come to next line it is adding on the same line.plz tell me wat can i do?
i want 2 select data from data gridview and want retrive that data into another form in to the textbox ...is it possible ? i 'm doing like this for that
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.[code...]
I created a VBA project in Excel. I would like to figure out how to transfer the data back in forth to make a more presentable and user-friendly program in VB Studio.Basically, I need my form in VB to input data to into an excel �workbook.data�, where the calculations are preformed. Then I need to copy the finished excel data cells �workbook.results� and paste them into an end result form in VB. I have tried looking at threads and cannot come up with a solution. There is no data saved each time the program runs, so I don't have a database.
how to save data (for example some text that user type [as password etc]) and save that password on same location where is application. After saving I want to have also Load option so we can load saved data.