Is there any code I can use in controlling a relay through a usb port using vb.net. I have to control some cylinders. So i have to use the relays and control them. For that I need to communicate through USB.
View 6 Repliesi wrote some code to control an ip device, i made in windows forms application , silverlight and asp.net, they all work on the local network , but won't work from internet web server, i have the router forwarding to local device ip and port,
i get this error:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 226.45.306.158:4999
here's the code used
Private Function SendRelayCommandTest(ByVal e As String) As String
'SendTextToIP("setstate,1:" & thePort & "," & TheState)
'Dim IPHostCC1 As String = "192.168.1.105"
[Code]....
im new around here and also to VB.NET infact any aspect of programming, im hoping to be able to some useful stuff but at the momment im a little stuck i only have basic knoweldge so anyway here goes im programming in VB.NET 2008 Express edition, im also using inpout32.dll which is running ok and also controlling the parallel port fine.the problem i have is as follows the program so far is controlling the 8 outputs at the momment, i can turn each individual one on but when i try to turn multiple outputs on it will only turn on one and the other that was turned on goes off i understand its controlled in a 255 bit array but how to decode it is a little tough
View 5 Repliescurrently doing a college project called Home Appliances System by using Voice Command.I have done the voice command part and now it comes to the interfacing between PC and relay board part. Currently I'm considering using USB port to send data(to trigger the home application). Does anyone know how to do it with VB.net?
View 9 RepliesI am controlling a relay board via a COM port, no problems. I need to connect to an IP connection, and read data from the server, after sending a username and password. Depending on the data, will depend on what relay I am going to switch.Now I have no idea where to start, I have a document that explains how I need to connect to the IP interface, and what data to expect.
View 7 RepliesWe are trying to modify a program to control a usb relay device. Essentially what the program originally does is give you a series of check boxes that you check to make the relay fire. We tried to modify the code so that the box is checked after 5 seconds using a counter and an if statement. It works, but only partially, what happens is the check box shows a check, but the even that is normally triggered does not happen. [code]
View 4 RepliesI am using SMTP Mail.. I am getting this issue"550 5.7.1 Unable to relay for user.domai.com"I have added the server name in the Relay of the IIS This also not done the trick?
View 4 Replieshow to capture an on/off signal from a relay and count the seconds of elapsed time between the cycles on a com port? Also, which pins on the com port should be used for this?
View 12 RepliesI am trying to send a simple email
Dim email As New MailMessage, Now.ToShortDateString, "Time Report")
Dim emailClient As New SmtpClient(
[code].....
I am trying to get my 4 port USB relay board to work in VB.net using the COM PORT. I found some code from a poster who has the 16 port USB relay version. When trying his code i can only get it to turn on relays 1-3 all at the same time. The product can be found here: USB 4 port relay
"01+//" - Relay 1 is switched ON
"01-//" - Relay 1 is switched OFF
"02+//" - Relay 2 is switched ON
"02-//" - Relay 2 is switched OFF
[code].....
So i am confused as to how to separate each relay out with that code above and just be able to turn on any number 1-4 relay on or off independently from each other!
I'm using interface with relay and interface is connected to computer on COM (serial) 9 pins port. In Visual Studio 2005 I'm using this
SerialPort1.Open
SerialPort1.DtrEnable = True
SerialPort1.Breakstate = True
[code].....
I am trying to get my 4 port USB relay board to work in VB.net using the COM PORT. I found some code from a poster who has the 16 port USB relay version. When trying his code i can only get it to turn on relays 1-3 all at the same time. The product can be found here: USB 4 port relay I was following what the guy in the post was doing to turn his on:
[Code]...
Here's my situation: I have a control with motion graphics (for the sake of simplicity, a 'video player' control) in my project. Think of a PictureBox with constantly-changing images. In front of this will sit a second control (such as a second PictureBox of the same dimensions). The topmost PictureBox will be drawn to in its Paint event.
I need to draw very few elements, and the bottom control is updated much more frequently than I need for this drawing. So these elements are drawn to the topmost control. Think of a news broadcast, where they have live video in the background, with a news channel logo, news ticker, and sometimes gradient visible in front.
I'm trying to create that 'foreground' control, and the closest I believe I have gotten so far is the following:
Imports System.Drawing
Imports System.Drawing.Imaging
Imports System.Drawing.Drawing2D
[CODE]...
The 'Opacity' property in the code above is a sort of "scaling factor." The image drawn to the top control may, in different parts of the image, have any alpha value from full transparent to a full 255. This 'Opacity' property is applied to the entire image being drawn, scaling the alpha values of each pixel.
See the following pictures for description:
[URL]
[URL]
[URL]
I want to set control position relative to other control so when i make one control hide then other control move up like this.
View 1 RepliesIm doing a mini project and i need to display an image in picture box control when a cell clicked in datagrid view control .the image is linked through the database ms access and im using vb.net frame work.
View 2 RepliesI have a requirement for a new application development where I must present some information to the user for selection via drag and drop. VB offers the TreeView control which would work nice, however the user does not like the Treeview control's presentation. The user wants a control that work similar to the Mac's Finder control while in column view.
Apple's Mac Finder Control works similar to window's treeview. Finder has a nifty view capability that my users would like in some new development that is being done. The finder supports a "column" view. Similar to the treeview, it starts out in a root list. The difference being, when a user makes a selection and clicks on a node, the node doesn't expand, the sub nodes appear on the pane to the right of the list. Clicking on a sub node, will cause the pane to split again and the items within that sub node appear
to the right again.
This will happen again and again with the left pane getting narrower as the user drives deeper into the sub nodes. That is what I am trying to replicate. Obviously, once the user reaches the base list of items, we have to support drag and drop capability. Does anyone know of a control for VB.NET that work similar to the Mac's Finder control?
I am upgrading user control from vb6 to vb.net.In the vb6 application I am loading 3000 labels using a label control array.In vb.net I am doing same but it's taking too much time to load.In vb6 it's taking 1-2 seconds, but in vb.net it's taking 30-40 seconds for same work. Why does it take too much time in vb.net for same work?Code is given below, here Led is the label control array.
For l = 1 To 3000
Led.Load(ledCounter)
ColLed.Add(Led(ledCounter))
[code]....
I have a UserControl that contains other controls that I would like to be able to rearrange or resize at design time. So I have a custom designer for the UserControl that inherits from System.Windows.Forms.Design.ParentControlDesigner, and I call EnableDesignMode on the child controls from within the designer. That way, at design time, I can drag and drop the child controls to move them, or resize them. But I can also drag and drop the child controls somewhere else on the form that is outside of the original UserControl. Is there a way I can limit the child controls from being moved or resized outside the UserControl?
View 1 RepliesI've created my own ascx control with button inside it. Now I'm using this control inside other control. (In my case it is a webpart). What I would like to do is program button.click logic from my custom control inside webpart
View 4 RepliesI am trying to use the Web Browser control in my vb .net user control. I am using VS 2008. Finally, I will be calling my assembly (.dll) from a web page. I wanted to display the usercontrol with the web browser control inside this web page. The problem is I cannot proceed since the Web browser control cannot be called from a partially trusted assembly. Using VS 2008 I have created a strong name for my class, also added the <Assembly: AllowPartiallyTrustedCallers()> to the AssemblyInfo. But still the web browser control cannot be seen in my web page. Do you how I can make my assembly fully trusted so that it can access web browser control? If you have used web browser control, can you confirm if this step is really required?!
View 2 RepliesI am in the process of designing a computer control program to control a HF communications receiver (radio), and have found a problem with the Serial port. I am using VB Express Edition 2008. This module of the program is supposed to take an input string from another part of the program, format it, break it into 4 bytes, and send it to the radio in hex form via COM port 1. The problem comes in when you try to enter a frequency with an 8 or a 9 in it. The 8 or 9 is usually replaced by 45, ex.-input 9900, receiver tune 4545. The exact same thing happens with 8's, input 8800 and receiver tune 4545. All other numbers other than 8 or 9 work fine. The strange part of it is that sometimes the 8's and 9's work, and work correctly. For instance, 900, 1900, 2900, 3900, 4900, 5900, 6900, and 7900 all work correctly. This led me to believe that is may only be when the 8 or 9 is in the first position, but that is not the case, it also shows up in other positions as well. All other frequencies that do not have 8 or 9 in them also work. I ran into this same problem with VB Express 2005, and worked on it for weeks before giving up and going back to VB6.0. This same module (with exception of the port open command) runs flawlessly under VB6. I have even tried importing the MSCOMM control from VB6, but it gives the same results. In de-bugging mode, all of the inputs, decimal and hex seem to be correct, so the problem must come in after you click the command button, but before it leaves the COM port.
[Code]...
I would like to be able to set Control visual properties such as color, boarder, flat style, etc. on the base class of the control so that as I add new instances of the control, each instance inherits the visual properties of the base. I have tried using Application Settings but it appears as though I need to reference an application setting manually each time I add the control to a form. This is a Windows Form question.
View 4 RepliesI Need Build a user control which works as a Login control using Windows Class Library or Component Template:The user control returns the user name and the password It means that the control has minimum two ReadOnly Property procedures. You let the user of your control (he/she which uses your control in his/her software) to set the background colour of the two labels. Create a Windows application to test your control.
View 10 RepliesThe following code works perfectly to allow moving a control on a form at run-time. However, when AutoScroll is set to True on Form1, and you drag Button1 past the right and/or bottom bounds of the form, it goes haywire. I really need someway to smoothing control the autoscroll so that as you scroll the control off the form, the scrollbars smoothly appear.
[Code]...
I'm writing some VB2008 code to control four 7-seg LEDs I bought from Velleman. They came with some example code in VB 5.0, and with instructions telling me to input 5 bytes at a time in the format Chr$() & Chr$() & etc. for the rest of the 5 bytes. When I try to do this using VB2008, it rejects the $ sign, so I've tried it using the Chr() format, which VB2008 allows. However, it doesn't work. Is Chr() the new version of Chr$() or are they different entities? In sending data to the LEDs, I'm using LiveComPort.WriteLine() as my command. (My serial port is called LiveComPort) I also tried it with LiveComPort.Write() asthe command. I know that my serial port and the LEDs are working, because they respond to the demo program provided by Velleman.
View 7 RepliesI have been able to associate a listview control with an imageview control to display images. There are a couple of things, I would like to do.
1> How do I display the image in the second column? 2> How do I increase the size of the image getting displayed? My images are all 48 x 48 (pixels), but they keep shrinking.
VB.NET
Option Explicit On
Imports System.IO
[code].....
I'm trying to make a program with transparent labels over pictureboxes and when I set the label Parent to the PictureBox the position of the label changes.
View 2 RepliesI am still messing around with Cntrl/Copy and Paste from a menustrip. Paste is working fine. The copy is working to a certain extent. It will copy the complete text field from one control to another. how do I determine what is the selected text only. My code below:
Private Sub CopyToolStripMenuItem_Click(ByVal sender As Object, ByVal e As EventArgs) Handles CopyToolStripMenuItem.Click
Dim activeChild As Form = Me.ActiveMdiChild ' Determine the active child form.
Dim activeControl As Control = activeChild.ActiveControl
[code]....
I tried it and get an error but maybe I'm tring the wrong way. Can a usercontrol inherate an application defined class ie.. could you inheritance a classic rect class into a user control to add the hight and width properties to the control without having to do all the coding all over again? Currently I just declair a private instance of the class within the control and then encapsalate. It would be nice if I could just inherit all the functionality of my classes into controls designed to implament the classes.
View 1 Repliesi frequently have troubles with the dock property. it seems that either the order of creation or adding to the parent control determines whether or not a control's dock property supersedes another's. e.g. a control with the dockstyle fill will overlap with another docked control on the same parent. does anyone know what the rules are to determine how docking will behave; particularly in dynamically created GUIs?
View 2 Replies