Random Numbers With Duplicate Values
Mar 9, 2010Get Random value with no duplicate
[Code]...
Get Random value with no duplicate
[Code]...
The program must generate 6 unique random numbers but when I click display numbers sometimes it gives me 6 unique numbers and sometimes I get duplicate numbers. I will add the code I have so far.
Public Class frmMain
Private Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
[CODE]...
I have a code that generates random code using a set of letters. One for a random pin and another for a random code. I can loop the generation of my codes depending on the input. When I try to generate 1 to 3 set of codes it works fine. but if it's 4 and above. I always get a duplicate set of random numbers. I don't what wrong. My code for generating my codes are in vb.net and be passed to a stored procedure for inventory.
Button event:
Protected Sub genCodeBtn_Click(sender As Object, e As EventArgs) Handles genCodeBtn.Click
connection = accDB.databaseConnect()
[code]....
So basically I'm making a BINGO game on vb 2008 and i have a "call number" button. The letter and numbers get added to a list box each time. But i do not want the same number to be called. Is there a way that the program can read the items in the list box and not generate (Randomly) the same value again to be displayed in the label.This is what i have:
Callnum = Int(75 * Rnd() + 1)
lstNumbersCalled.Items.Add(lblCallLetter.Text & " " & Callnum)
[code].....
how to eliminate duplicate random numbers displayed in labels ( a column of 5 labels). This is for a BINGO game i am doing. I have tried a Do .. Loop until structure with a for next but i am not sure how to proceed:
Do
For NumB = 0 To 4
B(NumB) = Int(15 * Rnd() + 1)
itemarrayB(NumB).Text = B(NumB)
Next
Loop Until
How can I check an array for duplicate random numbers and replace the duplicates with new random numbers?[code]...
View 7 RepliesThe class Random is out right defective. It always produces the same random numbers in the same sequence. Things I have tried so far is every kind of seed you can think of as well as Randomize. The result is that I always get the same random numbers in exactly the same sequence.
View 4 RepliesSo how would I use .next (random numbers) to randomly select something from a list of numbers but it can't repeat the number?I could do:
dim num as integer
dim r as new random
num = r.next(1,5)
if num = 1 then
elseif num = 2 then
etc.
That wouldn't work because it would repeat.If I donwload someone's game can I disect it in VS? :0 I tried going to open project, then I went to the folder and clicked open. It brought me inside of the folder so I tried to open the game but there is no form1 there. It says the games name then .exe in the explorer-like thing in the top right?Also, how would I have a value or something in a label and access it from a button.
Example:This is in a label.
Dim number as Integer
number = 0
Then in the button do
Label.number = 0
How would I do something like that? I want to use that a lot as I did in a different language.
I use this code in which i want different value of i (no duplicate). . but this code return some duplicate value of [code]...
View 5 RepliesMSDN not been very useful. Numbers must always be 1/6 Can't afford to have a duplicate come up in a row.
Private Sub toggleButtonVisibleState(ByVal send As Object, ByVal e As System.EventArgs)
Dim RandomClass As New Random()
Dim RandomNumber As Integer
RandomNumber = RandomClass.Next(1, 6)
[Code]...
I don't take programming lessons at school or anything, and I'm starting to (try to) teach myself about random things.Currently I'm making an app that has 3 functions:
-Random Integer (1 to 100)
-Random Answer (Yes or No, similar to a coin flip)
-Random Dice Roll (1 to 6)
How would I go about doing this?At the moment all I know about random numbers etc. is that I will need to do something along the lines of Dim dice As New Random or something like that, but, like I mentioned, I have no idea.I am well aware of the DIC rules that you won't write the code for me/do my "homework(?)" for me, and that's not what I'm asking.
how to use a Dim numbers() As Integer thats bout it here is my problem that iam facing :Use a one-dimensional array to solve the following problem: Read in 20 numbers, each of which is between 10 and 100, inclusive. As Each number is read, print it only if it is not a duplicate of a number already read. provide the "worst case" (in which all 20 numbers are different). use the smallest possible array to solve this problem.
View 5 RepliesI am having trouble in finding duplicate numbers in an array.the first one is to create an array with duplicates and then display the number that has been duplicated and how many times it has been duplicated.
Here is my uncompleted code:
Dim arry(4) As Double
arry(0) = 4
arry(1) = 44
[code]....
label10 displays which is the highest number
label12 displays which is the lowest number
label14 displays which is the number that is duplicated
My codes don't run 100% correct.:'(
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Label6.Text = Val(TextBox1.Text)
Label7.Text = Val(TextBox2.Text)
Label8.Text = Val(TextBox3.Text)
[Code] .....
I have been working on a pythagorean theorem calculator and am actually stuck on the final bit of code. What I am trying to do is check the values (integers) inside a listbox, remove duplicate number (both values), and input one of the values into a textbox.
Here is an example of what I am doing:
LISTBOX VALUES
2
2
3
[code]....
When the program runs, check listbox value #1 and listbox value #2, if listbox value #1 and #2 match (2 & 2), input that value (not both duplicates) into a variable, remove both of the duplicate values, continue checking the rest of the values, and finally multiply the leftover values. I am sure that sounds confusing. Here is what the final output will look like
LISTBOX VALUES
3
7
[code]....
Basically, I want to divide two numbers together and they should be 2 random numbers from 1-12 (I have done that part) but, the answer should be a whole number (i.e. Integer, so no decimal points etc) So, I did the following:
' Initialize the random-number generator.
Randomize()
' Generate random value between 1 and 12.
Dim value5 As Integer = CInt(Int((12 * Rnd()) + 1))
[code]....
but the problem here is that the program crashes after only a few clicks on the button. So I guess the question is: How can I make the program generate two numbers (from 1-12) that when divided become a whole number?(Is there any code that may tell the random generator that I want the numbers to be even?-so all even numbers from 1-12?)
Im trying to write a program that will do:
1.The average of the four numbers. This answer will be placed into a text box reserved for that value. This text box cannot be changed by the user.
2.The maximum and minimum values. These will be denoted by changing the color of the largest number green and the smallest number red.
3.The range of the numbers. The range is defined as the difference between the largest and smallest numbers. The range will be placed into its own text box, labeled as such. This text box cannot be changed by the user."
Im using visual studio 2008 and it has to be written in VB
i have wrote a loop to search for duplicate numbers within a column in a database which i have got fine but when i find a duplicate i would like to get the all of the row so if 33 was a duplicate i would like to get the following row.
33MarkWhitesideM12/07/1958Michaeluuu
I have tried to do this buy use something i saw on msnd's website:
Dim foundRow() As Data.DataRow = customerDS.Tables("Details").Select("HNCNO Like '33%'")
However if i change the line to notice the i beside the like
Dim foundRow() As Data.DataRow = customerDS.Tables("Details").Select("HNCNO Like 'i%'")
but i get Index was outside the bounds of the array. Ok i know that means that there is nothing in my array. What i would like is to find the duplicate row associated i. you will probably understand me better when you see the code.
Private Sub checkRowsForDups()
Dim customerDS As DataSet
Dim dupArray As New ArrayList
[Code].....
I have this project that let user inputs 5 different numbers from 1 to 50. But I want to validate it before saving to DB that i will be 5 unique numbers.
View 7 RepliesI am making a Bingo game. I have a button which keeps on calling numbers which are then added to a list box. How do i make it that the numbers called don't repeat (get displayed in the "number called" label). Is there a way to use items already added in the list box to eliminate duplicate numbers.
View 2 RepliesI'm using an unbound data grid in Visual Basic. I made the following loop for the purpose of searching each cell and each column for a duplicate value. But for some reason I get a "InvalidCastException" when I try to add a second row.
Private Sub AddJudgeBtn_Click(sender As System.Object, e As System.EventArgs) Handles AddJudgeBtn.Click
Dim exists As Boolean
' ToDo: If the value entered is already on the list, don't add again.
If JudgeList.Rows.Count() > 0 Then
[code]...
EDIT: Adding the entire click event.
I am trying to get duplicate values from dgv into a combo:
[Code]...
i want to know how to generate 7 "differents" random numbers.
I need to use a tab() with 7 entries and verify(with a loop?) if the generated number is or not present in the the table, if not then increment a counter by 1 and add the number in the table and increment the table position by 1 for the next randomized number.
Im not sure how to do the verification, so far all i have is a function i made for the random number between min and max:
Private Function randGen(ByVal min As Integer, ByVal max As Integer)
Dim random As New Random()
Dim i As Integer
[Code]....
I want to get random numbers between 0 to 100..But i do not want the random number to be repeated.
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim objRand As New Random
objRand.Next(0, 100)
End Sub
Suppose first time random numb generated is 10..Next time if same random number is generated,den i want to get the other random number..I want to get all the numbers b/w 1 to 100..but only one time
I want to get random numbers between 0 to 100..But i do not want the random number to be repeated.
Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim objRand As New Random
objRand.Next(0, 100)
End Sub
Suppose first time random numb generated is 10..Next time if same random number is generated,den i want to get the other random number. I want to get all the numbers b/w 1 to 100..but only one time
I want to random a numbers about 20 second. how to write the code
[Code]...
m_ListOfsAllFields.OrderBy(Function(x) x.DisplayOrder)
here I have DisplayOrder = 0 for 2 fields, so orderby is messing up and not ordering properly. How can I use orderby to order this collection?
How can i avoid the duplicate values in the Access Database?? I am working in VB.NET, to create DataEntry Form. I have Combobox. When enter the value on Combobox and press OK button then the value should check on the database , if the value is not there then it should save on the db. else the Missage will give "It is Saved".
View 6 RepliesI want to insert number for City_Id and City_name , i wrote a query for auto generate number for City_Id,working fine but in the city name i want to avoid inserting duplicate value like if Mumbai is a City ihave already saved then system should not allow that name again. neither in small or in capital or mixed letter.
View 4 Repliesam new to VB.NET and i was wondering if anyone here knows how to check for duplicate values in strings?
View 11 Replies