I imported a website made in visual studio express 2008 to visual studio express 2010. When I run the home page I get the following error:"It is an error to use a section registered asallowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS."
View 2 RepliesJust want to know the syntax for the Storyboard.SetTargetName.[code]
View 1 RepliesI'm writing it again, i'm developing an app in which user click a picture through image and image will be stored in sdcard then I have choose the picture from image view and send that picture to the server. I have convert my image into the byte array and then encoded it in Base64 string format but when i try to send that image to the server it give me an error of soap fault. Here's the my code of android device:
public void doneImage(){
ByteArrayOutputStream out = new ByteArrayOutputStream();
bitmap.compress(CompressFormat.JPEG, 100, out);
[code].....
I'm trying to use the .NextResult() method of a DataReader but I get an error that no data is present.
The 1st query returns a value but the 2nd query is the problem.
Dim strSqlStatement As String = "Select Count(*) As TotalRows " & _
"From Parents " & _
"Where (FatherName = @SearchValue " & _
[Code]......
I want to check if an IP address can be resolved to a hostname.I figured I would use System.Net.Dns.GetHostEntry as System.Net.Dns. GetHostByAddress is shown as obsolete in VS2008.
However,if I specify an invalid IP address to System.Net.Dns.GetHostEntry the HostName property equals the IP address I gave. If I use System.Net.Dns.GetHostByAddress it, rightly, gives a resolution error.I don't mind continuing to use System.Net.Dns. GetHostByAddress but is there any way to have System.Net.Dns.GetHostEntry throw an error if the IP address cannot be resolved to a hostname (other than by checking if the IP address given equals the hostname returned, I mean)
Has anyone ever tied to get a reference to resolve and then concatenate with a literal in an app.config key? I am trying to point to a resource, which in this case is a PDF file, and want to make the path to the resource configurable.[code]What I get is a string with the embedded double quotes I want but the Application.StartupPath reference does not resolve.
View 1 RepliesI'm using Visual Studio Development Server (Visual Basic 2010) and it works fine. Now I've enabled NTLM Authorization because I want to test the website using a different user account. Now when I try to access the website I always get the following error page:
Server Error in '/' Application.
HTTP Error 403 - Forbidden.
Version Information: ASP.NET Development Server 10.0.0.0 .I'm using a test account which is a normal user within our domain. I've already set the access rights in my project folder to Full Access for this user but it does not help.
I am creating a TCP socket on port 21 using server hostname.The code work fine in my laptop but when i test in a device with WindowsXPe , i am getting a Dns.Resolve error as "The type initilizer for system.Net.Dns threm exception"
[Code]...
"Warning1Could not resolve this reference. Could not locate the assembly "Dotnetrix.TabControl". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors." and i have no idea how to fix it. i need to use the dotnetrix.tabcontrol.dll for what im trying to do, but i can't build the program. i can debug it though. haha i am a complete newbie to visual basic but this seems to be my only problem so far.
View 8 RepliesI am getting the following error when i try to run my vb.net application on some other machine along with the related dlls and other files**********************************************************See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException: The 'add' start tag on
[code].....
I encrypted the AppSettings part of my web.config, tested it on my machine and it worked, but when I uploaded to use it online it gave me an error[code]...
View 2 RepliesFollowing is the error coming while executing.Server Error in '/' Application.Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details Parser Error Message: Itis an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 22: <customErrors mode="RemoteOnly"/>
Line 23:
[code]......
this one has me stumped - problem is bolded
Compiler Error Message: BC30456: 'Login1_Authenticate' is not a member of 'ASP.login_aspx'
<asp:LoginView ID="LoginView1" runat="server">
<LoggedInTemplate>
[code].....
Do I have to sign my VB.NET applications? I'm getting an error: SignTool reported an error 'Keyset does not exist' But have no interest in signing anything as the project is small and will only be used internally to my department. I could create a temporary key. But why would I want to?
View 4 Repliesi can't understand what the error:
"Error 1 'Application' is ambiguous between declarations in Modules 'WindowsApplication1.My.MyProject' and 'WindowsApplication1.My.MyWpfExtension'.F:DevVisualBasic 2010ProjectsWindowsApplication1WindowsApplication1My ProjectSettings.Designer.vb 33 16 WindowsApplication1"
when I attempt to make the connection through a VB.Net with window application, I am getting the following error: ERROR [28000]
My connection string is
HTML
<connectionStrings>
<add name="MyConnection" connectionString="Driver=PostgreSQL ANSI;Server=10.146.152.23;Port=5432;Database=pacs;Uid=postgres;Pwd=postgres;" />
</connectionStrings>
<system.diagnostics>
I'm new to visual basic 5 and here. I'm attempting to make a slot machine type of game. So far this is the code that i am using (below), the problem i am having is that nothing is showing up in the labels. And the try again message in a message box just keeps appearing when i start to debug [code]...
View 8 RepliesI am currently creating a vending machine program, designed to simulate a vending machine. However I have come across a rather large error, my stock is 50 at the begging. The person can go though the program and the appropiate amount of stock is taken away from the relavent object, however when I finish and want to go back to the start the last selection is still present.Therefore I have tried setting the variable as 0 when the form opens and when the program starts, but the last selection is still present.Does anyone know of a way to which I can reset this calculation without affecting my stock so I can then repeat my program cycle one or two times each time using the previous stock without reseting back to 50
View 10 RepliesI am getting the following error on a users machine who is running XP method not found 'system.string system.windows.forms.openfiledialog.get_safefilename
Do I need netframework 3.5 ?
I got an ASP.NET app from someone who used to run it on his IIS on Windows XP (I don't know which IIS version he has).When I tried to deploy it on my IIS (v7.5 - Windows 7) - I can't open its default.aspx file and I get the following error page:
HTTP Error 500.19 - Internal Server Error
Error Code 0x80070021
Config Error : This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy
allowOverride="false". Config File
C:inetpubwwwrootweb.config
Config Source:
I just found out that I have a bigger problem than i thought.. anyway.. it's with my app.config. It started with my main program that im almost done with but now its acting up and now it's everything.
View 1 RepliesI have created an application using VB.NET in VS2008. When I run the app in the IDE on my development machine it works fine. It also works fine when I build it and run it as an exe on any machine that also has Visual Studio installed (at least 2005 and 2008 anyway) However, when I try to run the compiled executable on any machine without Visual Studio it throws up an error "[program name] has encountered a problem and will close..."
View 5 RepliesI have been tasked with getting a asp.net (vb.net) talking to an analysis services engine on our production servers. The web server is a separate machine from the web server.The web server runs as the IUSR_ user.The application (of course) works on the development machine which has both IIS and Analysis services on it.The problem I see appears to be a permissions error (returned in the browser by the asp.net app):An existing connection was forcibly closed by the remote host ....
it is described in a similar post here: http:[url]......I am not a system admin, nor am I an expert in analysis services (why have I been tasked with this you ask? because other people haven't been able to get it working and it has fallen on me). I have tried creating and adding the user (IUSR_) to the sql server and added that user to the role. While that worked on my local machine, it did not work in our production environment where the sql and web servers are separate.
I have made an application using VB.NET which is used inhouse. In order to avoid everytime changing of exe on user's (multiple user) machine I want to use shortcut of exe on user's machine.
Where EXE is placed in one central location(Server).
I am getting bellow error on user's machine :
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Error after clicking on ok button:
Application attempted to perform not allowed by the security policy.Togrant this application the required permission,contact your system administrator,or use the Microsoft .NET Framework Configuration tool.
[Code]....
i am using MSComm control in my Vb.net Application ...it working gud in my system.but after creating the installation file if i install the projest in other system mean it not working it showing come runtime error System.Runtime.InteropServices.COMException (0x80040112): Creating an instance of the COM component with CLSID This is the run time exception i am getting?
View 2 RepliesI have developed a 32-bit VB.NET application that runs fine on 32-bit systems. Some of the folks in engineering, however, are using 64-bit machines, so we have created 32-bit virtual PCs and installed the application on the Virtual PC. When we try to run it, however, the application fails to establish a connection to the SQL server (remote, SQL 2000) for login validation.
View 11 RepliesWe have an application (Vb6) that gets installed at all of our client sites and they often (Vista/Windows 7) run into a the error message Unexpected error, quiting after a install on a new machine. The problem comes about when the UAC is on and the application is trying to create registry entries in areas it doesnt have access to because the application is running as a standard user. If the user runs the application as an admin the first time, everything sets up and life if good.
My question is, what is the most elegant way to setup those registry keys without forcing the user to run as an admin the first time? We could force them to run the applicaiton as an admin using a manifest file, but I dont want them to have to run as an
admin every time, just the first time.
I am trying to encryp web.confif using RsaProtectedConfigurationProvider.Everything works fine on my machine which is Windows XP. I know I am supposed to use "ASPNET" in following command for XP. My test server is WIndows server 2007 and following command gives me an error. "No mapping between account name and security IDs was done." I know ASPNET is not the default application pool on the server. What command should I use on the server?
aspnet_regiis -pa "NetFrameworkConfigurationKey" "ASPNET"
I have a web site that uses the both c# and vb.net in the app_code section. The different languages are separated into their own folder and correctly configured in the web.config.
<codeSubDirectories>
<add directoryName="BasicCode"/>
<add directoryName="CSharpCode"/>
</codeSubDirectories>
This works fine 95% of the time. In production using 2 load balanced servers I sporadically receive an error message along the lines of:
"Unable to find assembly
'App_SubCode_BasicCode.xxx,
Version=0.0.0.0, Culture=netural,
PublicKeyToken=null'.
The site is hosted in IIS7 and I think it has something to do with the name of the dll assigned during dynamic compilation. I do not see this problem in a single server environment. Could this be because when the session is balanced to the second server the dynamic compiled dll name is different?
I've moved my Database connection string into my app.config - however its causing a null exception error when i use it
App.Config
vb
<connectionStrings>
[Code].....