Application Just Stops Running - No Flags In Event Logs
Oct 18, 2011
I have a vb.net app that crashes after runnung for 6 hours. There is no error message. Application just stops running. No error noted in log. No flags in event logs. Is there a feature in vb.net that may cause this. Application uses excel 2003
I'm working on a program to read event log entries from several remote servers...its basically to automate some daily checks we doMy code works but is very slow as the event logs can have up to 60,000 entries in them.I only need to check the logs from the specified date but when i run this it appears to check from the oldest entry to the newest. does anyone know how to reverse the order it looks in? or to save the index it checked from yesterday to a file and only check newer entries next time it's run (obviously i know how to save a number to a file and read it back.. i just mean in terms of the eventlog API stuff!!!)
Dim elevent As New System.Diagnostics.EventLog("Application", currentserver) Dim elEventEntry As System.Diagnostics.EventLogEntry For Each elEventEntry In elevent.Entries
I am using VB 2008 Express. How can I read from the Windows System event log? I've seen many examples writing to an event log, but none about reading the log.
I would like to search event logs on my network for a certain EventID. I havent worked with Event Logs before and was wondering how difficult this task would be.
I have created a new VB2008 project and I want to display the newest 5 system errors from the eventlogs.So far I have this but all it retrieves at present is every entry where all I need is the latest 5. I wil eventually need to expand this to show EventID etc
I am working on creating a web app that will query event logs on internal servers for events using a specific ID. Since most of the servers are running Windows Server 2003, I cannot use the preferred System.Diagnostics.Eventing.Reader method that I was hoping to use.
I've seen the mention of using WMI, but would like to avoid this if possible. I have dabbled with the System.Diagnostics class but cannot seem to get it working when running on a server. It is able, when testing locally, to query my event log, but displays nothing when put on the final server. There is no error that is displayed after the program is ran.
I used to run the following code on WIN XP PRO and it used to work. But why not running anymore on WIN 7:
Dim Log As New System.Diagnostics.EventLog() Log.Source = "Demo Log" Log.WriteEntry("Hello World", EventLogEntryType.Warning)
It gives the following error message: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security.Luai Alrantisi, BSc in Computer Engineering, University of Ottawa 2007, Canada. IT Manager of MTN Mobile Telecom.
I am trying to write disk errors to the system event logs.I have a list of errors reported to the event logs if disk issues occur.So i just want to write dummie errors to the logs so I can do testing.I am able to write to the logs but the description comes up as follows:
I am working on a project that includes having my VB app pull event log data from a Windows 200x server remotely. Does anyone have any code snippets or reference sites that would have information on remotely accessing admin functions/data in a Win2Kx server environment?
I need to activate SSL when my application logs on to a ftp server. I'm searching the net and I can't find some piece of code to work, the username and the password are in plaintext, they are visible
I use this for now but it doesn't work:
Dim request As FtpWebRequest = CType(WebRequest.Create(ftp://ftpwt.com), FtpWebRequest) request.Credentials = New NetworkCredential("user", "password") request.EnableSsl = True request.Method = WebRequestMethods.Ftp.ListDirectory request.KeepAlive = False
I am using VS studio 2010 to build a asp.net (framework 4.0) website. My code behind is in VB.Net, My testing browser is Firefox (latest version), also tested on IE8 and Google Chrome, same behavior.Basically I have a LinkButton in a DataRepeater in a UpdatePanel.The _ItemCommand event DOES FIRE for as long as I use the page regularly (every few minutes or so).
The problem is this: When I open another webpage (in another browser tab) and sit on it for like 1 hour or so and then come back to test page in the browser tab and click on the LinkButton, no event is fired and the page gets a reload. Like if the button had just died on me.I first tough it might be a Session TimeOut issue but I logged the SessionID in a text file and the Session DOES NOT expire. <<<< Using new method for detecting TimeOut
I can confirm (logfiles) that the root of my problem is that the _ItemCommand event simply stops firing. I just have no idea why it does.I have tried most solutions proposed under similar problems (event not firing) but my problem is positively different because my event DOES fire... Only for a limited time.
My Repeater ViewState is enabled.I have tried changing the LinkButton for a Button but no joy same problem.I have tried the uping the AsyncPostBackTimeout of the ScryptManager... no joy either.I have tried sessionState mode="StateServer".I have tried disabling my AVG Link Scanner.Here is the code I'm now using to check for Session Timeout:
If Context.Session IsNot Nothing And Context.Session.IsNewSession _ And Page.Request.Headers("Cookie") IsNot Nothing _ And Page.Request.Headers("Cookie").IndexOf("ASP.NET_SessionId") >= 0 Then
I would like to create a VB .Net Windows form application which logs onto a website and then retrieves some data. Currently when i navigate to the website it presents a dialog box to enter my details into. So in short how could i do this, what namespace would i need to look at?
you tell me how to make a ClickOnce Application Start when A User Logs on? I am running Express so I cannot use the Installers in the full VS. I would like it so it will only add a shortcut when it is installed. (Application is available offline)
I am trying to make an application which logs on to a server using the telnet protocol runs a couple of commands and stores the output of these commands in a text file.The problem is that I cant really seem to figure out how to negotiate the telnet commands. I have done a packet capture of a telnet session todifferent servers using a packet capturing program and I dont seem to find any fixed pattern. Every server negotiates the command in its own different way and in a different sequence, moreover the commands exchanged are not the same.
What I want to do is to exchange the bare minimum commands which will allow me to log on to any server via telnet, run my commands, take the output and logout.I have searched the internet for such a set of 'general' telnet commands but I wasnt able to find any.
Event type clr20r3 p3 4a5c12c0 system.net.sockets.socket Exception and Application crash on some system. while running well on others. i go thorugh many forms and search a lot on google but not able to resolve the issue.
Im trying to create a windows service with vb.net but when I run: InstallUtil.exe myservice.exe
I'm getting the following error in the MyService.InstallLog file: Restoring event log to previous state for source DebtorInvoiceMailingService.An exception occurred during the Rollback phase of the System.Diagnostics.EventLogInstaller installer. System. Security. SecurityException: The source was not found, but some or all event logs could not be searched.Inaccessible logs: Security.An exception occurred during the Rollback phase of the installation. This exception will be ignored and the rollback will continue. However,the machine might not fully
I have a windows Forms app that displays data as it scans.Once you alt-tab or remove "focus" from the app and doing something else (open word) it stops updating. In otherwords it looks like the app has locked up.But it will finish the scanning as normal.But any updates from the scans being shown on the app window are not shown, that is until the app is finished and catches up.
I have an application I run on a netbook that is folded up inside a robot.Occasionally, something from the system tray will pop up unexpectedly. This removes the focus from my application I also thought there was a way (in forms properties in the vb6 days) that would allow to "run when minimized"? In short, I want this application to be running and nothing (asides an application error message) else getting in the way.
I'm uploading an image to url... etc. The trouble is my application stops responding for 5-10 seconds while the image is uploading. I want to use multi-threading to stop it doing that but I'm confused with the whole way to use controls with backgroundworker. [code] I guess its the textbox which is causing the problem.
I had done one application using api which send the message to given number. The working of software is very fine without any error working on windows XP SP2. I heard that vista already contain the .net frame work so didnt installed .net frame work in machine. I checked in vista it shows .net frame work is in machine. But when same code i tried to run on Vista it gives the error. Error is as follows
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at SmsSendingApplication.frmSingleMessage.InternetOpenUrl(Int64 hInternetSession, String& lpszUrl, String& lpszHeaders, Int64 dwHeadersLength, Int64 dwFlags, Int64
I'm trying to implement a boolean flag into a button so that when the button is clicked the flag will equal to true. After that i need to run an if statement stating that if the button is clicked then move/relocate the button to the corner of the screen. I tried setting my flag as true and using an IF statement but it didnt work. i get a syntax error stating "Operator '=' is not defined for types 'System.Windows.Forms.Button' and 'Boolean'
here's my code:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click If Button1 = flag1 Then Button1.Location = New Point(651, 511) End If End Sub
I am trying to speed up the process of changing flags within an INI file used for a program. Ideally i want a simple form with ON/OFF radio buttons which are specific to different options within the ini file. For example, if i wanted to turn Printing off in the ini file, i could select OFF for which this will edit the ini file and change the setting "Printer=0"
Code: Dim file As System.IO.File Dim reader As System.IO.StreamReader Dim line As String Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RadioButton1.CheckedChanged [Code] .....