Display Data From Datasource Into A Text Box?
Jun 12, 2009I would like to Display a note from a column in the Notes_tbl to a text box this from an Access database.[code]...
View 5 RepliesI would like to Display a note from a column in the Notes_tbl to a text box this from an Access database.[code]...
View 5 RepliesDataGridView1.DataSource = Table1TableAdapter.Fill(
Me
._OperatorGUI_DatabaseDataSet.Table1)
[code].....
I have a data set with a parent child relationship between a patient table and an insurance table. There can be up to 4 insurances for each patient. I want to display them in 4 separate panels of a vb.net form. So if a patient had 2 insurances, then txtName1.text on panel 1 would have the company name of the first insurance, txtName2.text on panel 2 would hold the company name of the second insurance, and so on.
How do I display only the insurances related to the current patient? I've tried moving through the rows of the related table, but that gives me all the rows, not the ones I need. Everything I see on the internet suggest using a datagrid, but that's not an option in this case.
I would like to use a text box to display some data.What I have to get me started is a button that writes some text to a text box.
when I press the button it writes some text but what I want is when I press it multiple time is to fill the text box with additional lines. I'm only getting one line.I'm using Visual Basic Express.
here's my
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
TextBox.Text = "write some text
"
End Sub
[code]....
I'm trying to develop a program which read from a text file data.Then display one data line per time with 2 sec delay in an lcd which is connected throught the internet.[code]....
View 4 RepliesI have a textbox for each day of week and I need to access the data in the textbox for the current day. In other words, if it is Tuesday I need to display the text in Tuesdays textbox automatically on startup. The data has been saved and can accessed.
Private Sub Timer15_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer15.Tick
lblCurrentTime.Text =
[Code]....
I have a datagridview which have 5 columns. The name of the columns are T,C,F,S,H.
I have a text file which contain lines like this.
T240C3.175F012S27H2000
T239C0.95F034S55H1000
T236C1.2F029S48H2000
T234C1.6F029S48H2000
So i want to display this data in datagried view. I must display the number beside T to T column, the number beside C to C column and so on. It should only display number in the respective column. It should not display the T,C and so on.
I am trying to read data from comport and display data in a rich text box.
View 2 Repliescode that can display data in tabular form for a text file. vb 2005
View 3 RepliesMy application reads the following data below from an xml file into a multi-line textbox - also scrollbar enabled (vertical). The data read into the textbox displays as "A1A2A3A4". Can someone recommend how I can get the textbox to display this vertically instead?Using VS & VB 2010 as new developer.
<?xml version="1.0" encoding="utf-8"?>
<Rows> _
<Row Sortorder="1"><Supplier Deleteme="false">A1
A2
[code]....
I have designed my form like this it has a combo box and several text boxes. In the form load I want to load the customer IDs of my customer table into my Combo box.Customer IDs data type is varchar and this part is working in my form.The next thing that I want to do is if a user select a single user ID from the combo box I need to display the first name last name and there are several fields of that selected customer id in the text boxes.If anyone can help me in this it'll be a great help.I have designed my data base in sql server 2008 and I'm using visual studio 2008.I added a new sqldata adapter and I created the data set.But I want to know how to pass the selected id of the combo box as the select parameter of sql statement and how to bind data to the text boxes.
View 2 RepliesHOW TO SEARCH or FILTER MYSQL DATA IN TEXT BOX & WILL DISPLAY TO THE LISTVIEW
View 10 RepliesI have a sqldatasource with a very simple select statement that should always return one row. I have textboxes on a page that i want to fill with that data from the datasource. how could i do this for textboxes? If there is no data in the database then i want the textboxes to remain empty.[code]....
View 3 Repliesi am building a database application in vb.net and i started by adding a data source from the DATA in the toolbar. my connection is good and it shows all my tables in the data source panel.
i also see new classes related to my database, like
sakilaDataSet
sakilaDataSet.customerDataTable
...
and so on.
how do i query and use these ? i googled a lot and i am not able to get this.
Dim cust As sakilaDataSet.customerDataTable = New sakilaDataSet.customerDataTable
Dim row() As System.Data.DataRow = cust.Select("customer_id=5")
MsgBox(row.Count)
My last try was with the above code, but the row.count always turns out to be zero.
my program has a datalist which list out all the item from datasource and display the detail information on different textbox the problem happened while i click "vitamin a" from datalist, and the "supplier name"will display "daily medicine",then when i click "vitamin b", it will display "sunny medicine",finally when i clicked back "vitamin a", the supplier name still remain "sunny medicine" which mean it does not change from "vitamin b"?
View 3 RepliesI am using the following code to add a row and data into my datasource.[code]Row # 150 for example, the reason is I want to be able to only add 1 record and if the end user adds another one it overwrites the exisitng one and also be able to retrive that record the next time program is opened.
View 6 RepliesI use vb.net and windows form and sqlserver
I added Data Source(Microsoft SQL Server (SqlClient)) to my project. and now I need to change it to ODBC Data Source .
I want to add items to my combobox but am not able to add a value and a display text.
View 3 RepliesI took the liberty of creating a small slideshow showing my problem. view it here.
[URL]
As you can see, I start with an empty data table on the data source. I add information to a form and the data appears on other parts of the program through data bound list boxes and such. I can exit debugging mode and re-enter it, and the data is still available.
However, the data is NOT actually added to the data source's table.
If I modify the program at all, the data that is floating around disappears.
I do not understand why this is happening. Apparently I need some kind of code to tell it to write permanently but I have no idea how to go about it. This is something I've been fighting with for over a week. I cannot find any solid information about this online at all.
creating an application using VB 2010 Express. i found data I entered into table were not saved (after I clicked"Save" button)successfully into Microsoft access file which I had added successfully as datasource.These are the codes:
Private
Sub
SaveToolStripButton_Click(ByVal
[code]....
how do you add information from another data source cell to a to another data source cell in a different form
View 1 RepliesI have this
[Code]...
which is supposed to get all the data from my table and set it as the datasource of a DataGridView. You can see where I put in two msgbox's to view how many columns are in the DGV before and after the "update". The first count gives me 22, which is the correct number. After the .DataSource and .DataMember lines are ran, the count jumps to 41 and I have no clue why. All I want to do is clear a dataset, fill it with the new data and set it as the data source of a datagridview. It appears the info is being saved to the table correctly too.
I'm trying to open a crystal report and have the datasource to be a data set but i'm having some problems. here's what I got so far:
My application is using a sqlCe database. On form1, I dragged the dataset, from the datasource tab, onto the form. when the user clicks a button on form1, this is called:
Dim rpt As New WorkLink_Application() 'The report you created.
Dim MyCommand As New SqlCeCommand()
Dim myDA As New SqlCeDataAdapter()
[Code].....
on the crystal report, i went through the database expert wizard and selected the dataset from Create New Connection-->ADO.Net. I then dragged a field from my table onto the report. When the report is opened, though, the field is not shown.
EMP_IDTextBox is from datasource on a form, and I tried to show messagebox to see what the value is
Whenn I try case 2, the messagebox shows me correct value, but not for case 1. It shows me no value even though there is a value.
How do I do it and what is the diffrence between case 1 and case 2?
I tried with a textbox which is not binded to datasource on case 1, then that shows me the value.
Case 1
Public Sub Save_Data()
Dim L_EMP_ID As String = Me.EMP_IDTextBox.SelectedText
MSGBOX(Me.EMP_IDTextBox.SelectedText)
[Code].....
Im a ASP.NET beginner. I previously asked how to do some databinding to a repeater without a datasourse.
[Code]...
sir i've one text field and two tables named table1,table2
i've to just display text from two different tables using two different navigations for each table.
1.when i'll click on first navigation, data from first table should have to display in textbox
2. when i'll click on second navigation, data from second table should have to display in same textbox alternatively
i've to show data in only one text box alternatively
i've binded designtime table1 to textbox
so how to unbind it & bind table2 to same texbox runtime.
like that i've 12 tables & 12 navigation for each table and only one text filed
I have a text file that looks like this:
9,1,3,Half,2.20
9,2,9,Half,2.20
9,2,7,Full,3.40
9,2,7,Return,4.20
9,5,2,Half,2.20
How I would sum the last column, all of the numbers in bold, of this text file and then make the result as the DataSource of a Textbox?
I was wondering how i can loop through a combo boxes items display item field - and return the value for each - i want this to be generic regardless of the combo boxes data source - or if the combo box has been populated with a string list / class etc
View 3 RepliesI am developing a winforms application that will have an offline mode, so that it can access the data if an internet connection (or more accurately, a connection to my WCF service) cannot be established. I have decided to utilize SQL Server Compact edition on the client side of the application & was wondering what the general consensus is on the "best" practice for making the client application (Sql Server Compact) subscribe to the master database (MSSQL 2008).
Management enters information into a web based administration panel that I developed and is stored in a MSSQL 2008 database.After adding / modifying information, they can click a release "datapack" button which will increment a "datapack" version number, which will later be used by the client application to determine if they are in sync or not. When the client application is started, it connects to the internet and determines if the version numbers are in sync. If not, it pulls the information from the server.
That third step is where I'm a bit lost I thought about simply developing a web service that will expose a dataset containing all of the data and just iterating through it doing inserts, but that seems terribly inefficient to me. The full database probably wouldn't amount to much more than 5 MB total, so that led me to think it would be great if when management clicks the release datapack button, it would store the database in a file that could simply be downloaded and would replace the embedded database. Again, I'm a little lost on how that would work. This is my first time working with an embedded database, most of my work has been web/win apps that have real-time access to the data.
I have a question about binding the datasource (MS Access database) to a listbox in a VB form. I have created a listbox and in the datasources explorer I have my datasource say SampleDS. I have several columns inside my datasource, say name, age, address in it. If I select name and drag to the listobx in the form, only the entries in the name column will be displayed in the listbox.
I want to know how to filter the name based on criteria. For example, how do I display names whose age >25?