strReportName = "ordprint"
Dim ra As Access.Application
Set ra = New Access.Application
[Code].....
My report is directly going to printer if i used acViewNormal. But i want to preview the report before printing and want to print if the report is ok. So i used AcViewpreview but the report is not previewed.
how I can reference a report variable in the Report Properties Code Window of a local report? I have tried Variables!Claimant.Value (for a variable called Claimant) but I get an error "Reference to a non-shared member requires an object reference." I have tried qualifying it with Report. and also with the report name in front of it but I get errors with this also.I have the variable CLaimant defined in the Variables section of the Report Properties.
View 3 RepliesI have added a report to my form.how I can access the controls on the report? Say I want to access the control on the form then I would simply reference the control in code i.e. Form1.Textbox1.Text = "Hello", but I cant see my reports in the VB when I look thought the intelisence.
View 1 RepliesI'm trying to print an Access form when a button is clicked but it's not working. From the guide here: with this code, but it's not working either. What am I doing wrong?
Dim oAccess = oAccess.OpenCurrentDatabase(filepath:="c:workdbName.mdb", Exclusive:=True)
Private Sub itmPrintPreview_Click(ByVal sender As System.Object, ByVal e As
[code]......
i need it to run/open a report that i have made in access. I have no idea how to go about this or if i need a connection code ( i have only had experience with connecting to an access database and filling a dataset with the information etc) I dont think id need an SQL for it? The report name is bookingrep and the access file name is Booking.mdb its an access 2003 file.
View 3 RepliesI have a Crystal Report that I am trying to access thru my VB.Net app. My problem is that I keep getting a "Database Logon" prompt (see screenshot). My code is below and I think I might have more than I actually need. I created the report from with the VS 2008 IDE.
Private Sub rptSingleWorkOrder()
Try
strSQL = "Select A.productName, " & _
"A.productDesc, " & _
[code]....
By the way, this code runs cleanly completely thru from the time the procedure is called until it exits.
how to make a crystal report in Vb.net using ms access as your back.end The purpose for this is about my project i think it's better to use a crystal report rather than to command another application for viewing your file right? ^_^
View 1 Replies
I've been trying to open Access reports from my application. The code I've been using opens the report but also prints it. I only really want the report to open.Here's the code ...
Dim accRpt As Object
accRpt = CreateObject("Access.Application")
accRpt.Application.OpenCurrentDatabase(strFileName)[code]....
Going through the code line by line I'm pretty sure I understand whats happening, but I'm totally stuck on why the report is sent to the printer. why the report prints?
I need an example code to insert a report from access database into vb 2005.
View 1 RepliesI have some reports that I want to be able to print but I'm not sure how to go about doing that in VB. Do I just go through the normal print code and then tell the program to open the report name up? I found some Access code but I'm not sure how it translates.[COD]...
View 10 Repliesi have done my application that uses crystal report and access database. I try to publish the application but when install on client machine, it wont work. the access database wont load and so the reports. What should i do?
View 9 RepliesI want to view ms access 2007 report whenever i clicked the button.
I already created ms access tables with the names of employees and other information that i need.
Im stuck on what i want to do right now. Just like i said, when i pressed the bottom i want ms access 2007 report will open instantly and if possible the print will ask like this picture.
how I can call an existing Access 2007 report from VB.Net 2008. I need not only to call the report but would like to be able to apply some VB.Net code to the report.
View 2 RepliesI would like to use VBA to change the caption of a report when it opens based on parameters set in the code. For example[code]...
View 1 RepliesI am having problem with the connection between an access database and crystal report. I created a crystal report by using wizard, all working go, but when I run the program in another computer am getting some error on path..wrong path for the database. So I need to find a way to connect database with the crystal report using a relative path...
View 1 RepliesI am trying to generate an excel report where the data is coming from access database using VB.
View 2 Replieshow can i create report and link it with MS access to display database on this report..
View 1 RepliesI have a Access DB and for simplistic terms, it has a table and a stored report.
The application will be a distributed application using Access Runtime.
What is the best method to print/view the report from the VB2008 application?
i am using Access 2003 and vs2005,i am trying to add data to my crystal report from my access database,ok. So to do this i followed these steps: Now after all these steps,how to add the column names of the table "Table1" in my crystal report?
View 11 RepliesBeen casually working on getting my users out of the DB completely. We use a vb.net app I created as a front-end but there are many reports that were built in Access and I want to give my users a way to open Access and run the report via my WinForms app.
Have gotten as far as being able to open an instance of Access and do what I need to do. Where I left off was running into a problem with not being able to tell if an instance of the msaccess.exe process is running and use it instead of opening another.
I have my crystal reports file accessing data from msaccess database.now while loading report i need to pass the logon info of the msaccess database along with the database name from vb.net.
[Code]...
I am trying to build a setup file which will install my vb.net application with database and crystal report files to the client.
1.) I created my vb.net application in release mode.
2.) I created new setup project and added my vb.net application project in that solution.
3.) Also added the primary output in application folder
4.) [dun know how to add database so] created app_data folder inside the application folder and added the database file manually from add->file
5.) [dun know how to add crystal reports so] created reports folder inside the application folder and added the reports manually from add->file
6.) Build solution.
7.) Tried deploying in client machine.
8.) Application runs fine and works great. But crystal report files doesn't. When i try to open crystal report some long error messages comes in my way.
So I would like to know is the way i am doing to add the database file and crystal report files correct? how can i make crystal reports work in client machine?
My IDE is MS Visual Studio 2008.I just want to ask how can I get the result of a store procedure from MS Access using VB.Net and use the result in a Crystal Report.
I have a Windows Application Project that requires this function.
I'm very new to Access and VB, and im about to print a specific record.. but im getting an error with this [code]...
My reports name is AVR Ekstern, and the prime key is Rapport nr and the form im clicking the button and viewing the record in, is AVR
I am looking to produce an Excel report from an Access database table. The data contains numerous records with fields for Site, Country, Region, Type and a Resolution Time. My problem is that each month the Sites change so I need to be able to write VB code within Access to read the database table and output 'Site' records for that month, grouped together along with the incident details for that site, e.g. The report would have the following headings:
'SITE' 'COUNTRY' 'REGION' 'TYPE' 'TOTAL' 'RESOLVED<3DAYS' 'RESOLVED>3DAYS' 'NOT RESOLVED'
MEL AUS APAC TECHNICAL 78 40 31 7
MEL AUS APAC HARDWARE 49 40 8 1
LON GBR EURO HARDWARE 90 40 40 10
As I will have over 30 different sites and these may change each month how do I loop through the data identifying each site and its associated field values? I have used the following code to open the data and loop through records printing to excel, but am stuck at grouping by site:
Set rst = db.OpenRecordset(sqlStat)
row=10.......
..... Do While Not rst.EOF
.cells(row, 1).Value = rst.Fields(0)
.cells(row, 1).Value = rst.Fields(1)
.cells(row, 1).Value = rst.Fields(2)...
When i pass the parameter and run the report it works fine as i close the form it closes the form is there any way so that i should be able to close the crystal report viewer and pass the parameter again and should be able to view report again.
View 1 RepliesI got a problem I want to print a report which is receipt having size 3 x 4 cm. i am unable to resize crystal report. i am using crystal report coming with visual studio.net 2008.
View 1 RepliesI created a button instead of the print button in crystal report because i need to record the report printed report serial number, date and time to the database. when i click on the button, dialog box appear. if i click on the ok button , system record the printed report details to the database and report printed successfully. but when i click on the cancel button , system again recording the printed report record.
[Code]...
I have created an application using vb.net 2008 and for reports Crystal Reports Basic for Visual Studio 2008 but the problem is, when I run the application in another machine away from developing box, I get the Load report failed notice. I don't have any idea on how I should approach this issue. I tried installing the CRRedist2008_x86 and CRRedist2005_x86 but still the problem won't go away.
View 3 RepliesI'm having a problem with my crystal report with regards to report footer. I want to display the data from the table, column name "Remarks" in report footer but when I try to call the data it doesn't show the remarks. I'm using VB 6 and mdb files as my back end. Is there any command or fundamental that I've missed?
View 1 Replies