VS 2008 - Rain Fall Code - User To Enetr The Rainfall For The Month
Oct 14, 2011
I am trying to write a code using VB 2008 (console) thats ask's the user to enetr the rainfall for the month. At the end of the year it will give him the average, total, highest, and lowest rainfall for the year. I have wrote the code for total and average but I have no idea where to start for higest and lowest month. I want it to display the month (July) and the measurement (6.3) for the higest and lowest month. This is what I have so far.
Module Module1
Sub Main()
Dim month(0 To 12) As String
Dim rain(0 To 12) As Double
Im Wirting a Program that ask a user to Input Rain Fall of Each Month Im using Arrays for this, then once a user clicks on Display Stats, the user should see Annaul Rain Fall, Average Rain fall, Min Rain Fall and finaly Max Rain Fall,Ok any way the Program is Working away but the Min and Max Rain fall is Showing 0.
(code) Public Class Form1 'Const IntNum_Months As Integer = 11 Const intNum_Months As Integer = 11
[code]....
i tryed a Val1 < Min and also a Val2 > Max, in Array(1) but this didnt work either.
Here is my problem. I'm not sure I am doing this correctly but I have two arrays [ strMonths(0) = "January"] etc. for each month and another one that receives input from the user concerning the amount of rainfall for a month. [decRainfall(0) = CDec(strMonths(0))] etc. for each subscript
The app. returns total rainfall for the year, average rainfall, maximum rainfall and minimum rainfall.The max. and min. should return the number that was input by the user and the month associated with that max. and min.I have everything working except for the month string being displayed (returned) after the max., min. number in the labels.
I have a homework assignment due for Rainfall Statistic and I started the program by dimming the month name and integer. I know how to get the program to input the number of rainfall for each month, but I dont know where to go from there. I'm new with this IT class and i'm just confused on how to do Arrays.
I'm developing a finance software and I want the user to enter a bill and pick the due date via month calendar. I getting it to work was the easy part, but now I only want one month calendar, for each time a user enters in a bill and picks a date.every time the user goes to pick a due date I have to call one of the several I have on screen.Here is my code that I have so far:Add due date button:
I need to create an console application that computes the average monthly rainfall, number of months with above average rainfall, and the number of months with below average rainfall, given the rainfall amounts for each month in a particular year. The program must read in and store in an array the monthly rainfall amounts entered by the user one by one.
So far this is what I have got Const intMonths As Integer = 11 'Constant Month variable Dim sngRainfall(intMonths) As Single 'Rain for the month Dim intCount As Integer ' Loop Counter Dim sngTotalRainfall, sngAvgRainfall As Single 'Total and Average Rainfall [Code] .....
How to set this up properly and I am having a real hard time figuring out how to make the data go from this loop to another and add the data to the total.
I want my game to tick over month by month at a set interval. I would use the timer control to get the interval. But how can I pause it? Say if one "month" is 5 minutes in my game and user hits pause. I would disable the timer but then when they unpause the game the timer would start from 0 again. This would make a "month" 9 minutes if a user paused the game in the 4th minute.
I changed the date of datetimepicker format to yyyy-mm-dd in custom format...but it displays 2009-00-22...the month part is not showing the month of the exact month..how to change the format of the date?
I am trying to go through a datatable and sort records that fall within a certain criteria, one being distance.I have a function that will get the distance between two points based on Lon/Lat and my records in table have Lon/Lat Values
exisitng code
Dim dtrow As DataRow Dim lat As Double = CDbl(34.213209) Dim lon As Double = CDbl(-118.629276)
[code]....
I can I now use the function to filter records in table that are with a certain distance?
i'm currently using VB.net 2005 with an Oracle 10g db.1. Alert the Admin by displaying on the main page a list of users who are due for re-certification if there are any. - I've managed to do this except my date calculation for the alert is wrong. When a user is certified say on 25-06-2010, they will be up for re-certification in 25-06-2011. I need my program to start alerting the Admin a MONTH before the user is due for re-certification. So basically start the alert on 25-05-2011.Currently this is my logic in VB.
Reason = Get value in Reason field (If this field is not empty, then don't raise alert for this record) Renewal = Get the re-certification date Sysdate = Get current system date
[code]...
Alert the Admin via email - I've managed to create an email (stored procedure in Oracle) that contains the skeleton. I say skeleton because althought the mail executes fine, I've not managed yet to include the list of users due from the db. I created a Curser and dumped my results in there, but not sure what to do after that.
I have a vb .NET 2005 form that needs to load data based on a selected month by the user. Because there is a large amount of data in the table (60k+ records per month) it is taking the query a long time to pull the dataset back and populate the form. how I can decrease the overhead associated with querying a large dataset to populate a base form?
Note, I have created an identity key on the main table but haven't yet indexed any other fields (Though I could use some suggestions on how I should index).
See the following example of the Stored Proc that is run before my .net form is launched:
Dim cmd2 As New SqlCommand Dim ConnectionString As String Dim TheDatabase As System.Data.SqlClient.SqlConnection
program that allows the user to enter a month and a number of years. (e.g March and 10 years) The program then displays all the months of the year from the entered month in a loop that runs as many times as the number of years.(e.g March April May.....December January February March....)
I am writting software for a touch screen (windows CE) as well as a desktop pc (windows XP)I have the software working for both, but the problem I am having is the Calendar.I need a Calendar for the current month, as well as allowing the user to go back to other months.I was going to use the control in vb.net called 'MonthCalendar' but when I add it to the form and make the control bigger (as in font) it adds to months when viewed on XP but when I copy the exe to the touch screen it only shows the 1 month like its ment to.Is there a better Calendar control I can use or does anyone know how to make it so that it only shows 1 month in the 'MonthCalendar' control?I am using VB.net 2008
I need to populate all date for an specific month selected by the user from a combobox where I added all months name. How I can create array of any months of the year, very new coder in vb.Net.
I have an internal application that I needs to have a drop down list for two date type elements: Month and Year.These values are not in a database or other repository of information.I know I could just setup a list with the values I need by adding them to a dictionary like object (I need to correlate the Month to the numerical representation, January => 01):
var months = new Dictionary<String,String>(); months.Add("01", "January"); ...
The drop down list for the year will be a bit easier as I can just choose a starting year and iterate up to the current or current+1 year in a generic list.Is there a better way to handle these data elements? Something built in, or a good design pattern that I should be implementing?
I am suppose to create an application that lets the user enter the rainfall for each of the 12 months into an array,I need total rainfall, avg rainfall, min rainfall and max rainfall. So far doing good but It wont accept input into the listbox..
For my programm I was told to do a programm to calculate the total and average rainfall. I have done so, but now I am supposed to use two function procedures to calculate the total and average rainfall. I can not seem to figure it out and it is very frustrating.
Currently i have a ReturnSystemDate in a module, so that whenever i need the current date and time i call this method, however my data is saving as in 1 format and displaying in another. I have my variables set up as dateTime to store the current date and time, when calling System.dateTime.now.toString() i get 11/08/2010 Time, however when casting to Date as in CDATE() i get 08/11/2010 time. How can i stop this?
How do I get numbers typed into a text box to be feed into my code and then the code to be ran?Below is the code that I want the information from a text box to be fed into. With the (0, 50) being the numbers.I will have a form set up like this, A button labeled Generate. 3 Text boxes total, 2 of them side by side with one being low and one high. For example The user will input 5 in the low box at 100 in the high box. Hitting generate the numbers will then be inserted into code and the result being shown in the 3rd text box.
Now what is the code that I'm looking for that will help me take information from TextBox1 and TextBox2 and insert into the (XXXX, XXXX) field in my buttons code?
im running the following bit of code in a background worker and it is coming up with the following error
"The remote server returned an error: (503) Bad sequence of commands."the code is My.Computer.Network.DownloadFile(strFTP & aryfiles(i), My.Settings.strLocalTemp & aryfiles(i), strPUserName, strPPassword, False, 100, True) It runs fine the first time through but 5 mins later when it runs again it always throws this error.
Im trying to programme a form to calculate rainfall total,average,maximum, and minimum.how do I create the input box that opens to input the info I cant seem to find it in the tool box. Am i Missing something, and how do I set a array to calculate?
How to generate code from user input. In Visual Studio 2008, Visual Basic. My script always begins with:
Code: function Init(Quest) Then from here a user would input a quest name, type and zone in a interface using windows forms. Ex: Code: RegisterQuest(Quest, "Kill Zombies", "Heritage", "Firestorm") end This part a user would enter in his interface what would an NPC say if accepted. [Code] .....
What I need is a few text boxs that a user can input "Kill Zombies" or whatever they like and when they push a generate button it will create a file with a .quest extension. All of the code remains the same except for the quotes that would be the user input from the interface. Basically everything in quotes can be changed by the user in an interface. I have created my own functions for when a user accepts, deny and complete a quest. The user just needs to input what should happen then click a generate button to throw it all together as a .quest file to be saved in his or her quest folder for the server to call on later.
I also have many other functions like: AddQuestRewardFaction --- (Quest, Faction ID, Amount) AddQuestRewardCoin --- (Quest, Copper, Silver, Gold, Plat) AddQuestStepObtainItem --- (Quest, Step ID, Description, Quantity, Percentage, TaskGroupText, Item ID(s)) Etc
I would also like to have these available on the UI but wont generate unless a user checks a box to add them or there is a box already for them but wont step into the code unless the user enters something into the box.
I have a ton of airports listed in my Combo Box Right? They are displayed in the following format;
Airport Name (ICAO Code) For Example Kansas City Intl (KCI);
Since I have so many, Can someone provide me with a code i can use so in a textbox the user has to only put the icao code and it will display the airport.
For example
TextBox1.Text = KCI
Once that user has clicked out of the text box, It will seach the combo box for any values with KCI and will display it
So if textbox1.text = KCI, then combobox1.value = Kansas City Intl (KCI)
there had to be an event that fires when mouse moves over the different areas of the Monthcalendar control.without clicking anything, i can see the "focus" moving to the different numbers. What is this event? the hover is for the entire control, but i am looking to return to the user the day or "number" day of the month without having to click on the day?
I have a problem in trying to get a list of a date including days in a table start from first day of the month to the last day of the month. This date should not include the satuday and sunday. and I should be able to pick up those date for query match.
I have a new application that i am trying to release on my desktop but after it installs it pops up the Cannot Start application dialog window with application cannot be started. contact the application vendor inside the msgbox. Details...> ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of C:Usersus0TB732DesktopTE2.0_DebugTEAuto.application resulted in exception. Following failure messages were detected:+ Value does not fall within the expected range.
But the crazy part is if i release the same program no changes to the code on my laptop i have no problems with it what so ever. Before you say it i cant just keep using my laptop because i dont like having my personal laptop at work.
i'm using VB.Net 2005 application program.i'm trying to convert VB6 code to VB.Net 2005. QSockB is DLL file.this is the code i used for VB6. This is code i'm using to create socket, when program runs... and when i hit start button it calls Q_SendHeader function.[code]This works fine in VB6... but Q_SendHeader is not working in VB.Net 2005.
I have just made a few changes to an old project I was working on, and now when I try to view the designer, I obtain this error: Value does not fall within the expected range.
Call Stack:
at EnvDTE80.CodeModel2.DotNetNameFromLanguageSpecific(String LanguageName) at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomParser.CodeTypeDeclarationFromCodeClass(CodeClass vsClass) at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomParser.Parse(TextReader codeStream)
