Zip Code (Numbers Beginning With 0)?
Jun 7, 2011
All appears well, except for the zip codes that begin with a zero. I'm using a case statement to verify the zone, but VS2010, helpful as it is, removes the the lead zeros, after which said zip codes won't verify.strZip is put in through a text box, and a debug.writeline will tell me that VS stores it correctly, with the leading zeros. But when I get to the Case statement, it just will not let me look for a zero initiated number. I felt I was doing well by going with a string rather than something more numerical, but that apparently isn't enough.
Excerpt:
dim strZip as string
Select Case strZip[code]....
View 2 Replies
ADVERTISEMENT
Jun 13, 2011
I am trying something new and that is VB2008. I have two numbers 12 and 15. I have made my form but now I need to make the code. I need to make a code that takes two numbers 12 and 15 and gets the max number out of those two numbers, which is 15.
View 2 Replies
Feb 11, 2011
Write the pseudo code needed to sum only the even numbers from 1-n, where n is a value given to you by the user
And I have something like this:
Dim x as integer
n = txtUserNumber
For x = 1 to n Step 2
Total+= sumofnumbers
Next
View 4 Replies
Dec 3, 2009
Basically I want to have a lines that contain certain numbers ignored. Where lines that do not contain those certain numbers show up in textbox1.text.For Instance.In the code I want it to ignore all lines that contain "1234" and "1645" when it reads Accessed.txt, and output every line that does not contain those numbers. So if a line contains "78910" it would output that line into textbox1.text.Here is what I have so far, and it works as long as I only have 1 if not contains statement. When I have more than one, it doesn't work at all and just outputs everything in the text file.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles Button1.Click
Dim r As New System.IO.StreamReader("S:accessed.txt")
[code].....
View 5 Replies
Sep 8, 2010
I have code that increments an array of numbers. However, due to performance issues, I need to optimize it.
Here is the code:
Public Sub increment(ByRef Index() As UInt16)
Dim N As Integer = Index.Length - 1
If (Index(0) = 65535) Then
Index(0) = 0
[Code] .....
View 18 Replies
Jan 27, 2010
Is someone can give me an example in code making in searching for telephone numbers. Im just a begginer with just a little knowledge in coding. Any simple example that can give me hints on how to start a code in searching of telephone numbers.
View 1 Replies
Jul 20, 2009
I'm reading three bytes from a byte array. They are supposed to be the "Binary code of the e-card no". (e-card is a electronic card used for storing different information). Well, it works fine sometimes, and sometimes not.
[Code]...
View 3 Replies
Jun 21, 2012
I my small application to read bar codes. url...
1. Code do you code to read what this scans.
2. Does the reader just read the numbers added to the buttom of the bar code? so with that i could look an item up in a database?
View 5 Replies
Apr 24, 2012
I am looking to print invioce numbers on stationary. So, for example, the invoice number is located in cell I1 of the excel spread sheet and starts at 100600. I want to print 150 invoices with the invoice number going up by 1 in each increment. So, I have thus far written:
[Code]...
What i need to achieve as you can now see is that the macro picks up the invoice number and does this however many times (or however many invoices I want to print.
View 7 Replies
Aug 24, 2009
I'm about to make verification code to my app it would be built out of random characters and numbers,i have no problem making a custom one,but before i go and do it i just wanted to ask if there is built in method of such thing .NET environment
View 3 Replies
Jan 8, 2012
i want to know the code for an average of numbers from 1 to a number entered?
View 31 Replies
Jun 16, 2009
Iam trying to write code that read integer numbers from user (intered in form) and put it in array and then i will do some calcuation.I declare The array z and index of array p at begining of the class (global), I dont specify the size of arry couz that it depend on user.
If CInt(l1.Text) >= 0 Then
z(p) = CInt(l1.Text.ToUpper)
l1.Clear()
l1.Focus()
[Code]...
View 11 Replies
Sep 10, 2011
I've got Visual Studio 2010 and I am looking to clean up my code technique, since I've taught myself and now I'm taking classes.
I'm trying to use a For...Next Loop so that I can fill a text box with sequential numbers. For some reason, all I can get in the text box is the last number and I feel that at this point I'm probably overthinking it...
All I want is on the button push the text box shows:
Here's what I have:
CODE:
Once I grasp this simple concept, I can move on to the actual challenge ahead of me, but I really want to know the proper way to handle this with out going all spaghetti code.
View 7 Replies
Nov 11, 2009
I'm wanting to make a program that translates binary code into numbers/letters and numbers/letters into binary code. I know the general system of binary code, but I dont know how to translate anything with VB.net. Is there a general command I need to use or can someone link me to a good tutorial about translating?
View 2 Replies
Apr 1, 2010
I have this code that writes text on an existing text file[code]...
I know it appends at the end of the file but how will you append at the beginning of the file? Is it possible?
View 1 Replies
Feb 26, 2012
"First of all please TURN OPTION STRICT ON.I make no apology for the capitals - I consider it that important.When you do you will see that you are still using HorizontalAlignment instead of ContentAlignment.VB is converting from one to the other for you.Although that works fine here there are many cases when it will not be what you intended and can cause some very hard to find bugs.Under Tools | Options | Projects and Solutions | VB Defaults Set: Option Strict ON, Option Explicit ON, Option Infer OFF".I did do this but it showed no errors, so I placed 'Option Strict On' at the start of the code, it then showed HorizontalAlignment with the squiggly line. I did edit my code to show this but I think you must have read it before I did. All other suggestions I will note and from now try to implement.Using "magic numbers" in the code is not good practice and makes maintenance difficult.Declare all such numbers at the top and use the names in the code.Is this what you mean? Const SpinTime As Integer = 500
Now when ever I refer in code to SpinTime it will always be 500..Change the NumberOfBoxes to 10 and run the app.In mine, to change boxes to 10 I needed to alter the code in 5 places, in yours 1 place! Talk about proof of the pudding etc.Now to my question, in the program when the start button is clicked and the five random numbers are displayed I have to stop and restart the program to generate five more. So I thought I would create another button 'Reset' this I did and all worked but it seemed a waste so I then just kept the start button in place and changed the text to Reset eg [code] This is fine the one thing I can't figure is how to replace the five numbers that were removed so that it is picking 5 from 500 every time. Now I'm at the end of all this writing I have it! just comment out the line 'Numbers.Remove(Number).
View 1 Replies
Sep 6, 2010
how to replace the html code numbers with the correct ones? i would show you example of html output, but vbforum automatically converts the characters so no point. i wish the replace all the & #40; (without the space) and so on with their correct replacement eg, ( in this case. also would like a short way to do this as i will be using this multiple times. so basically i would like the source to be exactly as it would if you viewed source in firefox browser, not with all the special chars unformatted like visual studio does.
View 3 Replies
Feb 27, 2011
When I exit the programme and start it again the checkbox selection from the previously job gets lost. After starting there is not a problem until I exit and start the programme again.
View 1 Replies
Dec 7, 2010
DnsGetHostEntry takes an IPaddress as an argument but the one I'm supplying it while debugging is throwing an exception of "No such host is known" when I know that this is a perfectly valid host.
Somehow a space or character has been introduced at the beginning of the strong as per the text in quotes below. I tried a Trim(" ",
" 10.0.110.37"
"" & vbLf & "10.0.110.37" this is what I see when clicking on Edit Value in Quickwatch
[Code].....
View 3 Replies
Feb 24, 2010
I have an VB.NET app that writes the status to a log file in text format. Over time, the file is getting large and I wanted to know if there is an efficient way to truncate the beginning of the file.
To make things easier, I am looking to specify a file size (say 2-3 mb) and I am writing the log using a StreamWriter:
Using strm As New IO.StreamWriter(filelocation.log, True)
strm.WriteLine("msg to write")
strm.Close()
End Using
I thought about using the strm.BaseStream.Length to determine how much of the file to cut off, but by using the .SetLength it would cut from the end - not the desired result.
View 4 Replies
Mar 12, 2010
I am developing an application that automatically checks player numbers in the Irish Lottery.
The code below checks each players 3 numbers against the six drawn numbers and reports on matching numbers and winnings. Each players information is stored in a specialised.string.collection in my.settings as shown below
Susan,3,18,26,2
Colin,4,16,28,1
The following checks the numbers but only the first item in the collection is being displayed in the multiine textbox.
Me.txtDrawInformation.Text = "Player results for " & drdate & vbCrLf & vbCrLf
Dim player As New ArrayList
For Each item In My.Settings.Wednesday
[CODE]..................
View 8 Replies
Oct 23, 2009
Im trying to create a new file at the begining of each month, and stay active for the rest of the month by adding the textbox info to it every time someone presses the Next or Exit button. Next and Exit button update the files Im not sure would it be easier to get the info across to Excel or sql server, but i woudlnt know how to do that, if that would be easiers.Aim of the what im doing, person logs button presses with the text files logging the number of presses of each of the buttons. then at the end of the session or when the user moves to the next item to be logged the files then save the counted section. need to it log everything for the month. Just trying to get the info into sqlserver 2008 as im logging each job as well.
If Me.DateTimePicker1.Text = "# october 2009" Then
' logging the monthly total
Using SW As New System.IO.StreamWriter(faultsfile)
SW.WriteLine(TextBox10.Text)
[code]....
View 8 Replies
Jul 8, 2011
how can i get the number of spaces in the beginning of each line before a word..following code is just for example reasons, not to be misunderstood for code that needs to be fixed.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If Clipboard.GetDataObject.GetDataPresent(DataFormats.Text) Then
RichTextBox1.Paste()
RichTextBox2.Paste()
End If
End Sub
[Code]...
View 2 Replies
Sep 10, 2009
I've done a customer register in a win form app. and I need to be able to search for a customer fast. If I have more than 100 customers I'd be spending all day to find the right customer by using the previous and next buttons, so I want to have a textbox and a search button. If I write for example just an "A", I want my program to show all customers beginning with an "A". If I write "AN" I want my program to show all customers beginning with "AN".
View 6 Replies
Dec 24, 2010
I tried using Insert to insert text to the beginning of a textbox in Visual Basic 2010 Express Edition, but it isn't working, using code like below.
TextBox1.Text.Insert(0, "text")
View 1 Replies
Jan 31, 2011
you have a richtextbox filled with alot of different things, nthing specific
how would you go about deleteing the first 2 items of all the lines if the line has 2 or more items?
View 6 Replies
Jun 25, 2010
program makes strings from webbrowser documenttext.For example
String1 = "<span class""long-title"" title"" Informations here"
Im trying to remove all text before "Informations here" this is what i currently have.
dim mychar as char () = {"<"c, "s"c, "p"c, "a"c, '....thatandlike20moretill.... "e"c, """"c}
string1 = string1.TrimStart(mychar)
(Note that each letter or symbol inbetween the quotations is a part of the string (span = "s" "p"...)Now this works. Not all the time though and its a pain in the .. having to do "letter"c, all the time.. (I got over 10 strings lol) Im wondering if theres a way easier method to remove part of string from the beginning, maybe like still a certen part of the length..
View 6 Replies
May 10, 2010
This is what I am trying but it doesn't work. The idea is to rest the caret position at the beginning after I hit enter and the conents od Textbox1 are deleted
Private Sub TextBox1_Keydown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
If e.KeyCode = Keys.Enter Then
[Code].....
View 9 Replies
Mar 15, 2010
I have a file in vb.net that i am using to read records. In the code behind my next button i read the next record in the file.How do i return to the beginning of the file when it reaches the end?Here is my code.
Dim sr As IO.StreamReader = IO.File.OpenText("CorkSouth.txt")
Private Sub Display()
If sr.EndOfStream = True Then
[code]....
View 8 Replies
Oct 21, 2009
I have some questions about arrays.
1) Lets say I open a file in a byte array and I need to add 5 bytes of data at the beginning. How would I go in doing that? ex: attaching to arrays together.
2) How would I go in adding 1 byte of data in a bye array?
All i need to do is open part of a file in bytes. Add a letter and 2 numbers to it at the begging and a number at the end.All i need to know is how to attach 2 byte arrays together and how can u add a byte of data to an array.
View 7 Replies
