C# - Redirecting To The Previously Browsed Web Page After Session Expires?
Feb 22, 2012
I'm developing web site using asp.net. In my web site after login i set session for the logged user for my web site need. and on each page i checked whether that session is null or having value and depending on the value i redirected to the login page.My issue is that after login i want to redirect to the previously browsed web page and i done it by using following way-code on the particular page for checking session value-
if (Session["EmployeeID"] != null)
{
}
else
[code]....
View 4 Replies
ADVERTISEMENT
Feb 12, 2010
c# - redirecting to the previously browsed web page after session expires
View 2 Replies
Oct 28, 2009
I have user log in logic in my web app. after successful log in, i set the user id in Session, so i can keep track of the user. and in my master file page load event, i do
Session.timeout = 60
so session should timeout after an hour. but my session times out at around 10 - 20 minutes. What am i doing wrong? i bet it's obvious.
View 3 Replies
Nov 16, 2011
My Asp.net Session Expires immediately even though i did the settings in web.config file,
<system.web>
<sessionState timeout="2880" mode="InProc" cookieless="UseCookies"></sessionState>
<customErrors mode="RemoteOnly"/>
[Code].....
i did above settings in web.config even then it expires after approx 3 minutes..
View 2 Replies
Apr 9, 2012
I'm having a problem with ASP.net redirectionThe Copy() method below is called from a javascript button in a grid with ajax and it works fine. It redirects to the Create action of the controller.
<AcceptVerbs(HttpVerbs.Post)> _
Sub Copy(ByVal noDemande As Integer)
Response.Redirect("/DemandeDeMontage/Create/" & noDemande)
[code]......
View 1 Replies
Mar 3, 2009
I have this function that utilizes jQuery's post feature to send an ajax request to my logout handler, which destroys the session (set by asp.net) and redirects to the login page:
<script type="text/javascript">
//<![CDATA[
function doLogout() {
[code].....
View 2 Replies
Feb 5, 2010
In my application I have a gridview in which details of containers are stored and displyed.There are many containers in this gridview, say more than 150 containers. I have implemented paging for this gridview as it contains many record. But its difficult for the user to go to every page and search one particular container. So i want a serach option for this.What I need is to enter a containernumber in a textbox and when I click a button, it should redirect to that particular page in the gridview where that particular containernumber exists.
View 2 Replies
Feb 2, 2010
i am new to this. i have 4 pages. login.aspx, account.aspx, settings.aspx and fliers.aspx.
its all programmed in vb.net with sql server backend.on my firstr page, login.aspx i have this code in the .vb page -
Dim SQL As String = "SELECT * FROM table1 WHERE email='" + Me.txtUserName.Text + "' AND password='" + Me.txtPassword.Text + "' "
ExecuteNonQuery(SQL)
[code]...
View 3 Replies
Apr 30, 2011
I have an ASP.NET form with a cancel button that is supposed to, after confirmation from the user, redirect them to another page. I'm using javascript for this. It works fine in a simple HTML page, but apparently something is interfering with it on the .aspx page. The popup message works perfectly, but clicking "Okay" does not take you to another page. I have tested the if statement and it is working correctly, the only thing it won't do is leave the current page. [code]...
View 1 Replies
Jan 29, 2010
I'm using javascript to send a array to my code behind so it can be saved. And also to redirecting the page to the next dataset.
function ChangeMonth(utcDate){
PageMethods.javaGetArray(colors);
alert("saving...");
window.location = "./transport.aspx?date=" + utcDate;
}
This works perfectly when there's an alert in between, the saving and the redirect. If I delete the alert it just redirects without saving.
View 1 Replies
Jul 29, 2009
I have three dropdown list boxes and a gridview. The gridview shows data based on what is entered in the dropdown list boxes. I have added a button that allows the user to insert a record into the database and then the page refreshes. The problem is that when the page refreshes the gridview goes back to whatever was initially in the dropdown list boxes when I first brought up the page. Is there a way to refresh and maintain the data in the list boxes so the gridview shows the same data? My code is below.
[Code]...
View 7 Replies
Mar 16, 2009
I have a page named a.aspx and clicking on the submit button i redirected to b.aspx with one parameter named fileid.
On clicking on back button from b.aspx i have to go to a.aspx.But now on clicking back button, i got one error as follows[code]....
View 1 Replies
Jun 17, 2011
I've got a VB.net web app, and its start page is http:\<myServer> myApp>webformslogin.aspx
I'd rather they didn't have to enter this whole address. Is there a simple way to redirect my users to this page if they just enter the root i.e. http:\<myServer><myApp> ?
View 2 Replies
Feb 3, 2011
I am using ASP.NET. It is possible to create a session variable on page load just for a particular page/url? The problem that I have is: The user comes to page 1 and the session variable becomes A, then he opens page 2 in a new tab and the session variable because B on both page 1 and page 2. So when the user needs the session variable on page 1 it does not work because the variable have changed!
View 2 Replies
Feb 10, 2012
I have some value related to Particular Name, for e.g.:
FirstName : Ghanshyam;
LastName : Thakkar;
Age : 25;
Designation : Student;
I want to pass this value to another Page using Session. How can I pass both Name and Value both in one variable using Session?
View 3 Replies
Dec 30, 2011
I have a login page that return the userName to a page called User.aspx.The User.aspx shows the information about the user based on a sql select. I fill 12 labels on the page with the result of the select.I want to keep the information of my 12 labels if the user Quits and enter again in the page.I save my session
Session("UserPage") = (litHello.Text And litAddresse.Text And litAnimalGenre.Text And litCouriel.Text And litNomAnimal.Text And litPays.Text And litPostalCode.Text And litProvince.Text And litRace.Text And litTel.Text And litVille.Text)
Now how I can proceed too fill all my label with my saved session call UserPage??
View 3 Replies
Jul 8, 2010
I'm planning to use some session variables on an intranet ASP/VB.NET page, and want to make sure that I'm not missing out on anything important I should know, or that I have my information mixed up. So here's what I (think) I know about session variables.They:are stored on the server, so if I have a lot of users then they'll each be using some more memory which could lead to a slowdown.are inaccessible by the user unless I expose access. hang around/persist across user requests (i.e. each time the user makes a request from the page the data will still be there - until it times out). This also means that I need to make sure that the variable doens't have "left over" data in it.
Is there anything that I've got totally wrong, or anything I'm missing? I'd prefer not to get bitten by a bug down the road because I think I understand what's going on.
View 1 Replies
Dec 4, 2009
If my sessions time out I want to re-direct the page to another URL: Say the home page. On my page I make use of a GridView that uses Session variables. If the session variable time expire(currently at 60min) and the user click on a row in the GridView I want to re-direct him/her to the home page of my site.
View 3 Replies
Oct 12, 2011
Using a session variable in my VB.net site has been figured out just fine. I just need to get my welcome message to stay put on every page. I put the code and text box in my master page to allow the message to stay there, but my label with the user's name disappears when I click on a different page.
The session is still there because I have it set up to display the textbox to enter your code if the session is destroyed or not available for some reason.
my code is not allowing the First_Name and Last_Name of the user's session to show up? The problem is in the Page_Load but I thought I would throw in the whole master.vb file to show everything I have so far.
Partial Class MasterPage
Inherits System.Web.UI.MasterPage
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code].....
View 1 Replies
Mar 29, 2012
I have 2 web pages. In the first webpage I have a text box which takes an user input.The number of controls rendered in the second page is based on the user input in the first page.I am storing the user input from the first page as a session variable [code]Now, I wish to use this session variable in the next page for initializing a global variable and what I tried to do is Dim num_Invitees As Integer = CType (Session("NoOfControls ToGenerate"),Integer)But this gives me a NullReferenceException.Can someone please suggest me what exactly I should be doing in order to use the session variable to initialize a global variable and also why the session variable's value is null while using outside a function but works fine when used inside a function?
View 1 Replies
Aug 3, 2011
I have a gridview and use a session to pass the variables from the page to an edit page. This works perfectly, until you search for a number. When you search the correct record displays in gridview, but when you click edit, it passes the wrong record.
Private Sub gridview1_RowEditing(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs) Handles GridView1.RowEditing
Session("wr_id") = GridView1.Rows(e.NewEditIndex).Cells(2).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(3).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(4).Text & "~/~" & _
[Code] .....
I realize not all of the code is pasted in here, because it would take too much space. Any Ideas? I'm guessing it has something to do with e.NewEditIndex
View 2 Replies
Jun 11, 2012
So In Default.master.cs PageLoad I have the following[code]...
However this is causing the following exception!object reference not set to an instance of an object.
View 1 Replies
Mar 25, 2011
I have an MVC application which sets some session variables based on internal static IP addresses.I have built an ApplicationController to override the OnActionExecuted sub in MVC for data that I need to use throughout my application.However, the code below, which is just a snippet of my code but is edited for my post, only partially works. On initial page load, the session variables aren't saved, but after a page refresh they are. The issue I have is that these need to be saved on the initial page load.
If Session("Item1") = Nothing Then
If IpAddressShort <> "" Then
Dim locInfo = cmsRepository.GetInfoBasedOnLocation(IpAddressShort).SingleOrDefault()
If locInfo IsNot Nothing Then
[code]....
Theoretically, if I'm correct, if there is no Session("Item1") set/if Session("Item1") is empty, then the rest of the snippet should run and set those variables.How come this isn't setting those variables on the first time the page load?
View 2 Replies
Feb 25, 2010
I have set up a class as a facade to access the session variables for my app. In this app I store an entire dataset for a particular employer as a session variable.Within one of the sub pages I have a button that adds a row to an existing table stored in that dataset.
Dim curRow As Data.DataRow = mySession.tWorksiteOtherMeasures.NewRow()
curRow("lngWorksiteID") = getSelectedWorksiteID(getSelectedSiteID())
curRow("strMeasure") = ""
curRow("lngStatusID") = -1
[code]....
When in the code to add the row the row count increments and the row exists. Once out of that scope the page refreshes due to the button being contained in an updatePanel. When that happens and I click the add button again the row counts for that item reset to 0 and 1 after the code runs. The previous added row is gone.Here is how the Dataset is assigned from the web service:
Public Shared Sub loadDSEmployer(ByVal strUserId As String)
Dim myService As New someservice.service
mySession.dsEmployer = myService.GetEmployerAndSites(strUserId, isInternal)
End Sub
View 1 Replies
Nov 9, 2011
i'm having some problem over here. When user enter their id,it will show up the main page and its for user but when admin enter their id,it will enter the user's main page and i have to click admin site on the top hyperlink and it automatically logout and once i enter back admin passwrd and then only it redirect to admin page.how to make it like once user enter their passwrd it redirect to user page and once admin enter admin password in the login it redirect to admin ?I have 3 roles over here which are admin,staff and user. Hereby i'll provide you my aspx code and also my vb code which is running behind the program.p
ASPX
<asp:Login ID="Login1" runat="server" BackColor="#009933" BorderColor="Red"
BorderPadding="4" BorderStyle="Ridge" BorderWidth="1px" Font-Names="Verdana"
[Code].....
View 2 Replies
Nov 11, 2009
I am storing an array of a custom serializable class in session on my site. When a page on the site changes, suddenly it renders them invalid, and tells me that it can't cast the type to it's own type. I assume the class version numbers are changing or something?!
I'm not trying to redesign this whole process.
Unable to cast object of type 'ShipmentPackages[]' to type 'ShipmentPackages[]'.
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidCastException: Unable to cast object of type 'ShipmentPackages[]' to type 'ShipmentPackages[]'.
[Code].....
View 2 Replies
Apr 10, 2009
I need my program to let the user choose a text file by browsing the computer then the file path of the file needs to be set as the New StreamReader path so that the computer can open the file.
[Code]...
View 1 Replies
May 6, 2011
So i'm new to using access/VBA and i'm having trouble getting this to work.[code]...
View 2 Replies
Feb 11, 2010
Imports System.IO
Public Class Form1
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles
[code]....
View 7 Replies
Mar 7, 2010
I have a browse button that only searchs to .map files. This is my code: >>
Private Sub But_Browse_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles But_Browse.Click
Dim SelecteerScherm As New OpenFileDialog()
SelecteerScherm.Filter = "Only .map files (*.map)|*.map|All Files (*.*)|*.*"
[code]....
When I do ok, how can I get this map file in a textbox ?
View 5 Replies
