I have checkedlistbox on my windows form which is binded to datasource,I do check the items in checkedlistbox based on some criteria,When user uncheck some items I want to save the records, but in Checked Items collection still I'm getting items as checked, which are unchecked. checked list box still remembers the previous checked items
View 5 RepliesEMP_IDTextBox is from datasource on a form, and I tried to show messagebox to see what the value is
Whenn I try case 2, the messagebox shows me correct value, but not for case 1. It shows me no value even though there is a value.
How do I do it and what is the diffrence between case 1 and case 2?
I tried with a textbox which is not binded to datasource on case 1, then that shows me the value.
Case 1
Public Sub Save_Data()
Dim L_EMP_ID As String = Me.EMP_IDTextBox.SelectedText
MSGBOX(Me.EMP_IDTextBox.SelectedText)
[Code].....
I have a datagridview with its datasource binded to a List(Of T). Now i would like to sort on any of the columns.My code:
'Database access : items = List(BlogPost)
dgBlogPosts.DataSource = items
'My BlogPost Class
Public Class BlogPost
[Code]...
Using Visual Studio 2010 I am trying to using windows form drag and drop by datasource .the grid generate automatically and with navigation bar with few controls like add, save , delete.But its not work on main table , meanS When I want to add new , it show saved but its not saved in actual datatable.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'Agents_DataSet.trans' table. You can move, or remove it, as needed.
Me.TransTableAdapter.Fill(Me.Agents_DataSet.trans)
[code]....
How to print a form binded with data grid?
View 1 RepliesI was just writing a windows application that populates three comboboxes from the same datasource. My datasource is a datatable. The way i populate the comboboxes is by repeating the following code for each of the comboboxes:
'populate 1st combobox
cbx1.DataSource = table
cbx1.DisplayMember = "someColumn"
cbx1.ValueMember = "anotherColumn"
cbx1.SelectedIndex = Indx
[CODE]...
When the application is run, and I select an item from the dropdown list of, say, cbx1, my choice is reflected in cbx2 and cbx3 as well. I find this behaviour strange and will be grateful if anybody could explain what is going on here behind the scenes. On a side note, I've been able to circumvent this problem by modifying my code as shown below, but would still like to have an explanation for this seemingly strange behaviour.
'populate 1st combobox
Dim t1 as datatable = table.Copy
cbx1.DataSource = t1
cbx1.DisplayMember = "someColumn"
cbx1.ValueMember = "anotherColumn"
cbx1.SelectedIndex = Indx
[CODE]...
There is probably a good reason for this but I haven't worked with multiple forms while keeping controls from unloading before.
The process I've always used to open new forms and go back and forth is below. Once I open a new form, get a value from the user and go back to the original form, the checkedlistbox.checkedindices value on the original form is then 0, though it was a positive value when going to the new form (I can tell that the original form is reinitialized when coming back to it so it makes sense that the controls would be empty at that point).
What is the best/proper way to control multiple forms and keep control properties available the entire time?[code]...
how can i dynamically populate checkedlistbox with items from the database?
View 3 RepliesOk, I have a CheckedListBox that I open as so.
[Code]...
However, the value of the count is always 0 when the form closes after clicking OK.
In a windows forms project, I have several combo boxes. The first combo box contains a list of objects. Those objects then have several lists which are used as the datasource's for the successive combo boxes, depending on which item is chosen in the first.
[Code]...
I use vb.net and windows form and sqlserver
I added Data Source(Microsoft SQL Server (SqlClient)) to my project. and now I need to change it to ODBC Data Source .
i have 3 Combobox and 1 Bindingsource in my form, i want to add the Bindingsource to the combobox's datasource like this
[Code]...
So i want to ask if someone can help me make the 'DataSource' member of 'System.Windows.Forms.Control' or are there any other way to add datasource for all the comboboxs without manual adding each one.
I have a form that with a list of text boxes. My target is simply binding these controls to an XML file so that whenever the file contents are changed externally, the text box values change dynamically. I will have an external application edit the XML file and overwrite the existing one.
View 3 RepliesI'm creating a dynamic combo box and adding to a form. I'm trying to fill the combo box with a DataSource from an ArrayList and then selecting an item in the combo box based off a value from a property.Problem is, the combo box items don't get bound until after the Form_Load event has finished and the form is visible. So the combo box is empty when I try to set the selected index of the combo box. See code for what I'm doing in detail, and refer to comments in
[code]...
How to select the right selected index for combo box without a hack (Load timer or something stupid like that)?
Whenever I setup a database connection, and then drag items from it onto my forms, I get errors! 102 of them to be precise.All I've done is create a data connection, add the datasource, created relationships and then dragged items ome. I've been working with databases for a while and have never had this problem when taking these steps.
View 7 RepliesI am having difficulties populating a checkedlistbox (CLB) based on the selection(s) made in another. It should also be noted that I have a "Select All" checkbox at the top that checks/unchecks all of the items in the first CLB. Here's the code:
[Code]...
The first CLB is populated with an arraylist of values on the button click event. Based on whatever is checked in the first CLB, corresponding values from an arraylist of structures should fill the second CLB.The following code partially works until the "Select All" checkbox is clicked at which point if other values have been selected before "Select All" is checked, the second CLB is filled with the correct number of corresponding values BUT only those of the most recently selected item of the first CLB instead of all of corresponding values of all of the items that were not already selected.
I have a base form and I am trying to get the DataSource of the ActiveControl if the control is a datagridview.What I have so far is:
Dim curControl As Control = Me.ActiveControl
Dim ControlType As String = curControl.GetType.ToString()
If ControlType = "System.Windows.Forms.DataGridView" Then
[code].....
During Loading a form, I bind a datasource property of the DGV to the bindingsource, and then set the fillweight property of the DGV columns. But, after form being shown, earlier set properties are being reseted to default = 100.
The procedure is like:
1. TestForm.Show()
2. TestForm_Load(...) Hnadles MyBase.Load
DGV.DataSource = bindingsource
DGV.columns(0).fillweight = 80
DGV.columns(1).fillweight = 120
3. Me.close() (Closing the form which called TestForm.Show()
And now I have visible a TestForm with well binded datasouce seeing all the columns, but their fillweith property was beeing reseted...
My form closes whenever I insert an object that has a data bound in it. The object I'm trying to insert is a textbox from the data source window (drag n drop). I've checked on the database and that the table has records in it.
View 1 RepliesI have a combo box with autocomplete binded to a database. I would like it to return, or at least assign to variables specific columns in the same row to a label when I press the button. I read something about Tag and Text in the label section but couldnt quite figure it out.
View 2 RepliesI have this class binded to a DataGridView with a BindingSource, what I'm trying to do is make the _SelectedMethod property a ComboBox in the GridView, and then make the items people are able to select from the ComboBox come from _Dictionary.here is my class which is binded to a DataGridView via a BindingSource.
[Code]...
I have some comboboxes that are binded to some fields in a datatable
is it possible to sort each single combobox without soting the datatable?
I got a DATASource connected, changed the table to details and draged it on to my form, but then it shows me the bindingnavigator at to of my form.
q1. how do i make it so every time this form opens it is like add new?
q2. how do make my own save button (don't want the binding navigator at top)
q3. in my form all my collums aper as textboxes how can i change it so there is a drop down menue that has forexaple 3 pre defined items that the user has to select on of.
I am using VB.NET 2005 and my problem is to sort binded DataGridView using numeric sorting (but for strings). As i understand problem is the same as in:http:[url].......or in http:[url].......My DataGridView.Datasource = DataTable. I want DataGridView to be able sorting numericaly when Column headers are clicked. This common function must be very easy, but unfortunately it is not :(. How can i get write sorting? I don't find answer in internet.Link1 is without explanable and i think it is for unbinded DataGridView and link2 is for for C+ or C#.
Examples:
Real Sorting when clicked on "Ports" header (other columns need write sorting too):
"COM1"
"COM10"[code].....
I have a datagrid in my project. The data connection is binded to it by the Tools -> Connect to a database feature in vb.net and it's working great. Since I have to use it for 2 countries how do I change the SQL in the connection and refresh the datagrid with the new data.
[Code]...
Mi'm working with a list box usually when i want to get the selected items i write something like this
listbox1.selecteditems(0).tostring
but when the listbox is databinded then i when i write this code i get the following string
datarow.view etc.
it seems that the item is the datarow and i can not get the actual selected items
I have created in Visual Basic .net a new DataGridView in my form. I have used the wizard to show some fields of a table in my access database.I would like to add a refresh button and force the datagrid to load the data again from the database, but I'm not sure how to do that. I have tried several refresh method but it does not work.
View 1 RepliesCan i update my record using the textbox which are bind with database table record
View 2 RepliesI've a SQL DataSource and a Datagrid in a Web Page. The data grid gets binded automatically when the page is loaded. How do I delay that until click event of a Button.
View 1 RepliesIm planing to make a little radio application for my own use,I want a Combobox with list of items and a URLs binded to them.for example i got 3 items in the combobox:
Radio1
Radio2
Radio3
I want it to be like when im choosing the "Radio1" and press my Play button ( AxWindowsMediaPlayer2.Ctlcontrols.play() ), the 1.1.1.1/Radio1.asx will open.