I keep receiving an "Access violation at address xxxxxx. Write of address xxxxxx." error when i close my MDI form (and hence my application).However this error only occurs after i have created a new child form.
I have stepped through the code and found that the exception is being thrown in the Settings.Designer file (Namespace My module). This is the chunk of code that throws the error[code]...
Form1 is a mdi container. It has a bunch of forms that can load inside of it as mdi children. If I close each open form inside the form1, and then click the red X at the top right, application exits fine.If I click the red X without closing the forms inside I get: An unhandled exception of type 'System.CannotUnloadAppDomainException' occurred in mscorlib.dll
Additional information: Error while unloading appdomain. (Exception from HRESULT: 0x80131015) However I can break from it. How do I get the application to not show that error? What must I do to fix those inside forms or close when the red x is clicked?
I am trying to create a ListBox in which every item can have it's own context menu. To do this I have created the classes as shown in the code. Now when I test this, I get the following error when adding an item to the collection using the 'Add' method:
INTERNAL ERROR:
Unhandled exception in Debugger::HandleIPCEvent.
Event ID=0x246.
[code].....
i were working in Windows xp. last week I changed my OS to Windows 7.The project i have done in Vb.net(2008) . While running class not registered error comes. In another computer its works well. Why it comes.
View 1 RepliesI have windows xp professionalx64 installed on my C:/ drive and windows xp home edition installed on my D:/ drive, i have adminstration priveledges.This is the error i receivedError while trying to run project: Unable to start debugging.Microsoft Visual Studio Remote Debugging Monitor (MSVSMON.EXE) failed to start. Verify that the remote debugger is installed.I uninstalled Visual Studio 2008 Professional and reinstalled it
View 8 RepliesI have code that has no output, it doesn't do what i want it to do, but i can't see any errors in it, there are also no errors in the compiler, but in debug mode there are the following errors:[code]
View 2 RepliesI have code that has no output, it doesn't do what i want it to do, but i can't see any errors in it, there are also no errors in the compiler, but in debug mode there are the following errors:
A first chance exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
A first chance exception of type 'System.InvalidOperationException' occurred in
[code].....
When I am in break mode, I cannot update code.I receive message "Cannot currently modify this text in the editor. It is read only." Can anyone explain why I get this message?
View 1 Repliesi wrote a piece of code to write some data to a card reader, and read back from that device, filling a form with the data (after reformat).When I step through the code while debugging (using F5, F8 for stepping forward) the form is filled correctly.However, when I run the code (Ctrl-F5), the program seems to hang for about 5 sec and then throws an exception: 'Length should be >0' When looking further during debug - it seems that the program calls 2x the Sub Frm_Read_Display(). I
Imports System.Windows.Forms
Imports System
Imports System.IO.Ports
Imports System.Threading
[code]....
I am getting this error list when debugging my project also the project can not connect to sql server in debugging mode.[code]
View 2 RepliesI use some random number generators in a piece of VB.net code to simulate Gene reproduction. It works as followed:
- I generate a male chromosome that contains 46 random chromosomes which I put in the Arraylist: MaleChromosomes.
- I generate a female chromosome that contains 46 random chromosomes which I put in the Arraylist: FemaleChromosomes.
- Then I have a piece of code that randomly picks 23 chromosomes from the female arraylist and randomly picks 23 chromosomes from the male chromosomes ( Very simple simulation of reproduction ) and put these in the arraylist: Child
- I repeat this for the second child ( Arraylist: Child2.)
- Now I have piece of code that compares these arraylist to see how many chromosomes the two children share.
Have been running this application on 8 PCs since January.My application uses variations of this
Dim Artist4_TBD As New DataView(Me.SSPE_InterCOMM1DataSet.SSPE_ArtScheduler)
[Code]...
i am using visual studio 2005 on win 7 with office 2007. i have developed win application. i am using microsoft activex spreadsheet component in my program. so it automatically creates reference to AxInterop.OWC11.dll When i run program in debug mode (open program and click RUN in toolbar it works) but if i run directly .exe (go to bin elease doubleclick .exe) it give error at loading point of that component. It says "Attempted to read or write protected memory. This is often an indication that other memory has been corrupted." An unhandled exception occurrs.
[Code]...
What is the real mode , protected mode , supervisor mode and the hypervisor mode ?
View 1 RepliesI have a vb.net web application in visual web developer 2008 with a dll file and i need to debug a method in that dll. I also have project source files for the dll file itself. How could i make the web application use the source instead of the dll file so that i'd be able to debug it? I've tried debugging the dll project itself, but it's not a very good solution, because it seems the dll depends on the web application settings and data and it would simply be too much work to get it working. T
View 1 RepliesI trying to run MediaViewer and I getting a debugging error, sorry, I have no idea what this is about but this is the error message: "Could not load file or assembly 'Atalasoft.Shared, Version=2.1.0.2, Culture=neutral, PublicKey Token=2b02b46f7326f73b'....."
Then it goes on to say "WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value[HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog]. I am running Vista.
When I try to debug my application (of which it will not be click once)I get a Application identity is not set exception.[code]
View 2 RepliesWhen i try to debug my application it immediately switches to a new tab that says "No source available" with an error that says InvalidOperationException was unhandled, An error occured creating this form. See Exception.InnerException for details...
View 2 RepliesI am trying to run my projects and i come across this visual studio error.Is this because of the .suo?? "Method does not exist" in vb.net
View 4 Repliesi am building a WCF Service Library that has to check our CRM database. Unfortunately when i try to debug the service with the WCF Test Client i receive a "Failed to invoke the service" error. I have stripped down the service slowly adding things back in to help figure out what is causing the error. I found out that it is cause when i call a new instance of my CRM service object. Is there something that i need to do in order to fix this error and be able to step through the service to debug it??
[Code]...
Error when debugging with open database
View 6 Repliesi got "A first chance exception of type 'System.PlatformNotSupportedException' occurred in System.Speech.dll"and "A first chance exception of type 'System.NullReferenceException' occurred in System.Speech.dll" error while debugging the code i got from here
View 1 RepliesI am running on the VB8 and expirienced an error during debugging after some changes in "My project" area. I have noticed (on two different machine) that after change for example Startup Form or Security Area, I am not able to debug program any longer. An error appears, telling me that:
The Operation Could not be completed.
After clicking OK (nothing else is available) and next try of debugging, another error message appear:
Visual Studio could not copy a support file to this location: "path". Please verify the path exists and is writeable. After that, I have to close Visual Basic and restart it. Than everything works fine...till next change of "My project"
I am new to ClickOnce deployment and at first glance it seems a great way to maintain .Net applications updated with ease. I am developing a simple application that stores information on a mdb database and over some XML files. I understood how to use the "data" folder with ClickOnce and I am developing the part of my application that should migrate the data from older versions after a ClickOnce update. Now I need to debug that part of my code that only runs when the application is in "networkDeployed" mode. So actually I'm doing the following really slow process to test a new deployed version:
publishing the application on a provisional website (I can choose between a faster locale iis site or a real online one) installing the application from the deploying website (the first time) or running the old installed application so it automatically catch new updates and gets updated... running the application
So basically I have two problems here:
the whole process is much too slow :/ I'm running the app as every other app directly from the OS, so I can't access to the debugger...
I am pretty sure that there are better way to test ClickOnce deployed applications...
I have created and deployed a windows service application and I added this line of code "System.Diagnostics.Debugger.Launch()" in the beginning of OnStart method in order to be able to debug the service but when I start the service the nothing is happened. I think the OnStart method have never fired otherwise the visual studio will popup once the debugger.launch line is executed even I tried to write some text to the event viewer to make sure but nothing gets written to the events viewer after I started the service. I included also the debugging symbol in my windows service setup project but I end up with the same result.Why it's not working? How can I make sure that the OnStart method gets fired or not?
View 2 Repliesmy code is giving me a serious problems i thought my code has worked prefectly but theresulting valuesare not corresponding with the typed sentences in the text box .i thought when i had trimmed my sentences the code would work but thatis not the case now .i am requesting full assitance with my code is displayed here:
Dim txtInput
As
String =
[code].....
I have a problem whereby I cannot debug a c# silverlight application project that is hosted from within a visual basic web application. I add breakpoints to the main App constructor and the symbols are loaded ok but my breakpoints are never hit. I have concluded that it is a vb/c# interop problem as to test i did the following.
Created a new c# web application project
Added a c# silverlight application
Added a new vb web application project
Added references to the silverlight project from both web apps
set a breakpoint in App.xaml.cs constructor
if i run the c# webapp the break points are hit whereas if i run the vb webapp they are not.
activating just In time (JIT) debugging-- I have a propmt that I have an unhandled exception in my application (??).
View 1 RepliesI wrote the following code to build a basic game that makes two cars race (randomgenerator) and let the user pick their bets on the end results. I've gone terribly wrong somewhere in that my cars only race halfway then get stuck behind the start line and the programme keeps repeating the beeping and the messsagebox.show and adding results to the 'incorrect' box.
The only way to terminate the application is to hit 'stop debugging'.
Option Explicit On
Option Strict On
Public Class MainForm
[Code].....
I can pause the application and see that it thinks no threads are running so no call stack. The other projects in the same solution are all responding fine, just this one stalls. I can not think of any way to work out what it was doing at time of stall, I have no event logs, no breakpoints, there is no particular thing I can check for in my own logging system (which is quite extensive) that shows where/why/what the application is hanging for. Any clues on how to solve/investigate? To add, this is on a Vista box, but not able to move the system to anything else (source controlled) until I can find out what this is. Its an avenue I can go down if required however.
View 4 Replies