Update Changed Values In Datagridview To Oracle DB
Apr 21, 2010
I am using oracle database and i already created a connection and retrieved data from my oracle DB to Datagridview using oledb commands,now my major challenge which has gotten me sick is to update any changes made in the datagridview to the oracle database. I tried using sqlcommandbuilder but failed. This code is what i used to retrieved the data from oracle and place it into the datagridview.
These are my declarations i made at the beginning of the form:
Private myDA As OleDbDataAdapter
Private myDataSet As DataSet
These are the codes inside the search button to load the retrieved data from oracle into the datagridview
Public con As OleDbConnection = New OleDbConnection("Provider=MSDAORA.1;User ID=SYSTEM; Password=simon; database=project")
I have a single form with a datagridview on it showing values from an oracle database. I am trying to set up a way of detecting if the row/column I click on is empty or not, just as a little exercise. I have so far got this:
Private Sub DataGridView1_CellClick(ByVal sender As Object, _ ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) _ Handles DataGridView1.CellClick Dim c, r As Integer c = e.ColumnIndex r = e.RowIndex [Code] .....
The message going into lbl2 shows the co-ordinate values of any box I click in but as you can see with the IF statement below I am trying to see if the system can detect whenever I click in a value that is empty (null or ''). When I run my form and populate the list with a column of names I can click in 0, 0 cell and I get a message saying the 'Box is not empty' as above.
But when I click in any of the next boxes e.g. (1,0) (2,0) etc I get this: 'Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index'
Pointing to this line of If Not DataGridView1.Item(r, c).Value Is Nothing Then Not sure what this means at all. I am under the impression that my piece of code is gathering the value of the item depending on the co-ordinate values. so why should this fail? What index/collection is VB talking about?
Private Sub cmdCharge_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdCharge.Click Connect() Dim cmd As New SqlCommand[code].....
I want to update a particular row in the database table but no success,i keep on receiving this error One or more errors occurred during processing of command. ORA-00907: missing right parenthesis
Cmd = New OleDbCommand("UPDATE SUB_DETAIL SET (LECT_ID = " & TextBox3.Text & ") WHERE SUB_ID = " & cmb_subID.Text & ")", con) con.Open()
I have the following code in a VB .NET application. I am trying to update columns in an Oracle table with data with SQL data. When I run the application, I get (ORA-00933: SQL command not properly ended) for the 'or_cmd_3.ExecuteNonQuery()' line.
If I strip out the code and run it in TOAD or SQL Developer, replacing the temp varialve with some bogus data it updates fine. What am I missing?
ElseIf (oracle_summary_temp = ueio_tmpALM_Summary) And (oracle_request_ID_temp = ueio_tmpALM_ID) And added_to_alm = "1" AndAlso ({"Deferred", "Rejected", "Closed"}.Contains(ueio_tmpALM_Status)) Then Dim update_oracle As String = Nothing
I'm new at vb.net programming so be gentle. I have the flowing code
Dim dAdapter = New OleDbDataAdapter("Select * from items", dbConOra) Dim dTable = New DataTable() dAdapter.Fill(dTable) BSourceItems.DataSource = dTable DataGridVew1.DataSource = BSourceItems
Does anyone know why the string generated by the Timestring() function remains on the old timezone time if you change the timezone whilst the application is running.
Is there a way to fix this problem without restarting the program.
I've got a gridview (ASP.net) inside of an update panel. I also have a "Save" button so that when I click "Save" it loops through all the rows of a grid view and passes the data to a stored procedure to update each row. This was too slow as sometimes I would be updating the database even though a change did not occur.
My Scenario is that i have fetch data from one SQL Server table into vb.net DataTable.Now if any record is changed or New Record is saved into SQL Server Table i want to fetch or update only that record into my data table. is it possible.
I'm basically putting some validation logic around an undo button on my form and i'd like to check whether any fields on the form have had their values changed so i can ask the question "abandon changes?". This seems like something pretty standard to me but I can not see how to check whether a value has had its contents changed (without recording a before value and comparing it to the after value which for large forms would be quite horrendous to code).
In the language i used to use we used to walk the object tree (so we dont have to specify each object individually like text box, combo box etc) and check any object that have value-changed = yes to indicate the validation was required.
I have the following simple Sub to write a dataset back to an Oracle database
[code..]
Checking the logs today I noticed that for some executions I got an ORA-0001 (constraint violation) error. It seems that one of the fields in the oracle table being updated is marked as unique and my dataset contains one or more records that have the same value in that field.
How is this error handled? Does it just not add the violating records? Does it hit the invalid record and quit? Does it rollback?
I have a content page which contains an UpdatePanel and has a combobox. When the combobox value is changed I want to change a label in my Master page. So, the main problem for me is that I don't want to make a full postback with every combobox value changing. Is there some trick to overcome full postback?
I am using a class to track if a user cleared their personal information found within some text boxes on a form. In the button click event to clear the text boxes I am creating a new object to the class and assigning true to one property value. Sounds simple until I try and submit the form with a different button, and create a another object reference that I use in an IF statement to check the property value for true. Every time the statement fails because the value being returned from the getter in my class is false.
im currently working with an SQL Server 2008 database and im trying to change values in the database usign visual basic.The following code runs correctly and I have tested changing passwords and have been able to logoff and then back on again using the new password. The problem i am facing is that as soon as the application exits the database returns to its origional values so the next time i run the program the passwords are back to the old values.
I have a MultiView with several Views within it. When the ActiveView changes I want to selectively databind a label that is in one of the views. Ideally, I don't want to do it every time the ActiveView changes, rather only when it is actually the view containing the label that is active.[code]...
I'm basically trying to implement the functionality of the example here ax/grid/examples/dataediting/editondblclick/defaultvb.aspx) on my own site, but instead of using a data source control located in the page markup (like in the example: essionDataSource), I'm using a dataset that I get from some server code-behind. I am able to successfully get my double-clicked row into edit mode with my dropdowns successfully
I've created a Datagridview bound to a Datatable. This Datatable is updated by a event to reflect statistical information as it changes (sub second resolution). I have a checkbox to determine if a row is available for other functions and can be toggled on and off normally if my eventhandler is not receiving my updates.
If my bound Datatable is changed, the checkbox returns to its previous state as soon as the cursor or focus leaves the checkbox glyph (not the cell).
How do I toggle the checkboxes without them reseting without disconnecting my eventhandler?
I need to "refresh" a DataGridView, bound to a database table, on a form within a TabControl The DataGridView is loaded correctly on strartup... But if the data in the DataBase change, How do I refresh it to reflect new records or updates?
this is what I am doing in code, after looking for some examples on the web:
I had a datagridview with databound. I want to write a coding is when user click at any cell of the datagridview, then it will get the whole data of the row and save it into oracle database.
I've been searching all over and I'm either not searching for the right words or it just doesn't exist. I've got a datagridview (dgv) on a form with some textboxes that are databound to different fields in the dgv's datasource. I want to capture an event if someone changes a value through one of the databound controls so I can mark the row as modified. I've been going through the dgv events trying to capture something, but I can't find anything that fires when a value is changed. The dgv is read only, so the values can only be changed through the databount textboxes.
How to I know if someone changes a value in the dgv? Is there a setting in the dgv that will tell me if a row is modified?
I have an unbound Datagridview which gets its data from an array from an Excel sheet. I give the user the chance to amend this data in a Datagridview. I then need to know if the user has changed this data before processing it further. I have in vain, tried to use IsCurrentRowDirty, IsCurrentCellDirty, looping through DGV matrix etc. It seems that because the DGV is not bound to a dataset then the normal properties like HasChanged and the 2 above don't seem to work. Here is my attempted code which is not working:
Dim DGRow As DataGridViewRow Dim DGCell As DataGridViewCell For Each DGRow In DGV_ReviewDetails.Rows
I made an account manager where i can store all my accounts and I want it more protected, how can I changed the displayed text in my "colPassword" in datagridview? Just like in textbox the PasswordChar, please give me sample code :)
i'm using vb 2010 to write a program for my school. i'm asking the teachers to key in their student's curricular activities into a program through datagridview. i manage to restrict the code they enter by validating it in the datagridview cellvaluechanged event handler. my idea is as follow.
1. teacher enters code in the datagrid.
2. vb check the the value and if it is in the database then update. if not then give a preset value "-1" as no record.
these are my code...
Private Sub DataGridView1_CellValueChanged(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellValueChanged Dim Cn As New ADODB.Connection
[Code]....
my problem is... is there a way so that when the teacher enters an INVALID CODE and leaves the cell by mean of pressing "enter" or by clicking at other cells, the cell edited before is remain focused and the value before is revert back?
Now what I want to do is capture the event every time a value is changed in the combo box drop down (selectedindexchanged). When the index is changed, I want to grab the row number, and then I will grab the value of the now selectedindex and do some database updates with it.
I currently have tried to put together an event grabber when the combo box is changed, however it doesn't work correctly.
My code is:
Private Sub dgvRooms_EditingControlShowing(ByVal sender As Object, _ ByVal e As DataGridViewEditingControlShowingEventArgs) _ Handles dgvRooms.EditingControlShowing
[Code].....
I put in a message box to check that it was capturing the event. I then noticed that it captures it more than once when you change the value.
The problem is when I go to click the down arrow on the row, the event is run once (message box show). Then you have to click a second time (event is run again with message box) before it shows the drop down list.
Then when you click on the value you wish in the drop down box it shows the message box (the only time I want it to run).
Then when I leave that row, it shows the message box two more times.
Effectively it goes to update the data 5 times, I only want to do it once.
I can not there is a pencil editing icon when you click on a row to the far left, and it appears when you leave the row, after already clicking on your value, it then checks on row leave that the values havn't changed, hence it runs two more times.
How do I make it so it only runs once on the value being changed?
Is there a way to disable the pencil editing, but still enable the combo box column to work? (be clickable and choose an option)
I have datagridview with XSD as the binding source (i configured it with the smart tags). After build, the dgv change its columnIndex which surely result error of my code.
For example
columnIndex(0) = idEmployee (dataGridViewTextBoxColumn) columnIndex(1) = name (dataGridViewTextBoxColumn) columnIndex(2) = status (dataGridViewCheckBoxColumn) suddenly, the columnIndex(2) moved into columnIndex(0)
Ive got a datagridview, which the user can put in to 'edit' mode by double clicking. If they then make changes but click to another row, I want to msg asking if they are sure they want to discard then changes. If they say No I want to stop the selection change from being made.
Private Sub DataGridView1_SelectionChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DataGridView1.SelectionChanged If edit = True Then
vb.net Private Sub DataGridView1_CellValueChanged _ (ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) _ Handles DataGridView1.CellValueChanged
