I have never programmed anything in my life -- and I'm learning VB from a tutorial which I found here:[URL]...So I've created my button and added the code. Then it says:
"Now run your first application!"I have no idea how to do that!
I create many buttons in code like :
Public Sub GenereTextBox(ByVal rep As String)
Dim txt As New TextBox
Dim fnt As Font
fnt = Me.Font
txt.Location = New Drawing.Point(26 + NbreCacher * (68), txtOrdonnee)
[Code] .....
And I want delete some buttons create when I click on my button, but I don't how I can do, because these buttons are create in code??
I created a listbox and button in my application using vb code.When the user select an item in the listbox and click on the remove button, the item will be removed from the listbox. I know how to remove the item in the listbox, but I don't know what coding to add to activate the click event on the button.
View 4 RepliesI have this code to create a new button
Dim NewButton As New Button
frmDownload.Controls.Add(NewButton )
This works. But I want to change what happens upon clicking NewButton. It should start an application. I tried NewButton.Click but that event doesn't exist.
Hi how's it going. In the middle of coding a banking application for a project. Part of it involves mortgage interest repayments. Was wondering if there was any way of logging the time a new record was created and added to the database and then adding interest to the balance owed periodically every 30 days..
View 3 RepliesI'm using ASP.net 4.0 VB,I am using a session variable to add a user entered code into the url of each page. I can get the code to show up at the end of the page's URL that my textbox is on, but what do I add to every page to make sure that the session stays at the end of every URL that person visits during their session? This is the code from the page that the user enters their user code.
Protected Sub IBTextBoxButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles IBTextBoxButton.Click
Session("IB") = IBTextBox.Text
Dim IB As String = Session("IB")
End Sub
[code]....
This is what I have in the page load of one of the other pages. What else do I add to make sure that variable is added to the URL of that page?
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim IB As String
IB = Session("IB")
End Sub
I've been working on a project the last couple of day with the help of a lot of you out there. I've more or less finished the design of the interfase, but there are stange this happening with the form. I can say much about what is wrong because I dont understand it, but I would like to. I have added the form Class code and the Designer Code, is that enough or is more required? Theres a msgbox that popup in the form Load event which I placed there to see what I could learn about the GraphicsBuffer.
Imports System.Drawing
Imports System.Drawing.BufferedGraphics
Imports System.Drawing.BufferedGraphicsContext
[CODE]...
how to move button over a panel from the form in which the button is created dynamically at run-time ?
View 1 RepliesIn my project, I have a local dataset (XSD) that I am using as local-temporary tables. I am getting a System.InvalidCastException when trying to access the field in one the tables. I believe this is because I my code is (incorrectly) not setting a field's value in a row before trying to access it.My problem is that the exception is breaking in the designer file and not in my code. As a result, I'm having difficulting determining which line of my code reading the field value before it has been set. Is there any way to configure Visual Studio to break in my code instead of in the designer created file?
View 1 RepliesI've created a simple web browser in vb 2008 express.I would like to create a bookmark function, I've created a menu strip and added a "bookmarks" (favorieten) item with an "add bookmark" (favoriet toevoegen) subitem The bookmarks should be placed in the menustrip under "bookmarks" (like in Firefox / IE)
How should this be implemented? The application uses the IE controlls, when I open a site in my browser all pop-ups are opened in internet explorer. Is it also possible to open pop-ups in a new window of my browser?
I have added a button in datarepeater. If clicked once, it executes code and Button.text should change to Yes. Clicked again, it executes the opposite code and button.text should change to No. Codes are being executed (I am using flag variable) but Button.text is not changing.
How to change this text. I am simply trying Button.text="Yes" but probably I need to give some reference of the row no. too. How to do it?
I have a program that displays all of prisoners details.I use a form to add all of the details and then on another form it shows them, i have a search so that when you type the prisoner number in it will find that specific prisoner.When i add a prisoner a count in a textbox moves up 1 to show how many prisoners in the system.When i have added all of the prisoners i need to be able to go through them using a next and previous button.Can someone help me with the coding for these two buttons?
View 3 RepliesI need to be able to add buttons in my application dynamically, and I have written this
Dim bttn As New System.Windows.Forms.Button()
bttn.Text = "This is a new button"
bttn.Left = 326
[code].....
I have an explorer-like interface which in many ways mimiques the behaviour of a standard explorer window. What I need is to find some way of knowing if something had changed in the filesystem since the last time I checked.What I mean, for example if a user creates a directory or renames a file - I need a way to know that. Right now I re-read the contents of the displayed folder once per second and I added a manual 'Refresh' button, but I wonder if there is a better solution.I tried to use FileSystemWatcher component for that but either I couldn't figure out how it works or it doesn't have such functionality.
View 1 RepliesI tryed to make a media player and i added a button to the form called "Full Srceen".[code]'so i get an error message : Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
View 2 RepliesI'm creating an online exam page with 30 radiobuttons that are created dynamically at runtime. How will I get the click event of each radiobutton and tag it in my method that I will check if the next question is need to be jump or escape. Example: If I'm in question 10 and answer = "Yes", redirect me to Question 15, else go to the next question
View 3 RepliesI do not have any code to show, but using asp.net, vb.net, and SQL with stored procedures.If on a page I have an item that is added to the database and therefore that information is "saved", is there a way to have an ("exit without saving") button on the page that does away with those changes?Using infragisitcs ultrawebgrid, you add an item to one table. You can add an item to another table on that page. i assume adding these items to the table automatically saves in the database. There is also a text box but without clicking save I do not believe that those items are actually added to the database. Update panel is used, I don't know if that matters.
If after someone adds to the table but then decides.. oh wait.. I don't want to do this just yet, is there a "one-click" way to act as if I never visited that page to add info? I'm assuming it would be deleting the entries but this would have to be limited to deleting ONLY those items added while making... we don't want people adding info, then going back and deleting once the "save" button has been pushed.
I created 3 Forms (Form1, Form2 and Form3) and I added a button on every form. This is code for Button1 on Form1:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Form2.BackColor = Color.Red
Form3.BackColor = Color.Red
Me.Hide()
Form2.Show()
End Sub
Code for Button1 on Form2:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
Form3.Show()
End Sub
Code for Button1 on Form3:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
Form2.Show()
End Sub
Now, the problem is that when I click on Button1 on Form3 it shows Form2 but the Form2 BackColor is not red, it is default color, A.K.A Control Color. But I specified in Button1 on Form1 that Form2.BackColor is Red. And also if I click on Button1 on Form2 when Form3 shows it, the Form3 BackColor is also default, it is not red.
I know one way to solve it but it is so not-professional. It is that you add on Button1 on Form2 this:
Form3.BackColor = Color.Red
and on Button1 on Form3 this:
Form2.BackColor = Color.Red
It is ok in this situation but what if I have more stuff, for example if I have an option for changing theme so it has to change all labels and buttons ForeColor, what then, is there any other way?
I've got a groupbox on my form. I changed its font and fore color. The problem is that when I add a button or any other controls like a label, checkbox etc to the groupbox, the controls are automatically changing their fore color and font to that of the groupbox. How to prevent this?
View 5 RepliesI added a groupbox and changed its heading's font and fore color. The problem is that, when I add a button to this groupbox, it automatically changes its font and fore color to that of the groupbox!How to prevent this from happening?
View 2 RepliesWhen the user selects an "account" we dynamically create a linkbutton with the selected dates. However, the linkbutton onclick handler doesn't fire when the button is clicked.
Dim linkBtn As New LinkButton
linkBtn.Text = "----"
AddHandler linkBtn.Click, AddressOf linkButtonHandler
linkBtn.ID = panelDatesRencontre.Controls.OfType(Of LinkButton).Count
panelDatesRencontre.Controls.Add(linkBtn)
[Code] .....
I make that in page_load, it seems to work.
I'm using the arrow keys to move an animated gif around a form. However when I add a button control to the form the animated gif no longer responds to the arrow keys.
#include "stdafx.h"
using namespace System;
using namespace System::Drawing;
[code].....
I have a form with a text box and a form with a list box. I would like to be able to push a button on the form with the text box and have it be added to a list box.
View 3 RepliesHow to parse HTML added by code behind using vb.net code ?[code]...
View 1 RepliesI my small application to read bar codes. url...
1. Code do you code to read what this scans.
2. Does the reader just read the numbers added to the buttom of the bar code? so with that i could look an item up in a database?
I want to use an image I created as a button. I tried setting the the image as a background for the button but that didn't work well. So what would be another way?
View 8 RepliesI can do this using VBA, but I want to be able to create the code using a compiled VB programme, which can then be opened in Excel.
View 1 RepliesIs there a DLL or code for class (documented) that can be added to an app to pull movie and TV info down from the IMDB? I have see a lot of older stuff, but nothing documented or working outside of a semi-functional Python piece and am just not ready to wade my way through Python.
View 7 RepliesI am writing the following code on the rowdatabound of the grid view and i am not getting the click event of link button..[code]
View 4 RepliesI am trying to add an image to button but it errors out on line marked with [code]...
View 5 Replies
