faster way to flood fill an area of a bitmap? It basically acts just like the fill flood bucket in MS Paint. clsBitmapImage is a Bitmap variable.
Code:
Code:
Public Sub FloodFill(ByVal AtPoint As Point, ByVal newColor As Color)
Dim oldColor As Color = clsBitmapImage.GetPixel(AtPoint.X, AtPoint.Y)
If oldColor.ToArgb <> newColor.ToArgb Then
[code].....
i'm working on Virtual K770i project - there is a picture of mobile, now i want to create clickable areas on "keypad" of mobile....I'm got idea about transparent label or something but transparency dont work on any object but Form1 - so how to make transparent clickable areas on picture box (see a picture)
View 2 RepliesIf I have a control, in this case a button, can I restrict the area it considers valid for text?
In the attached image, the left and right arrows are custom drawn in the paint even, I also have a scroll timer that scrolls the text if the length exceeds the buttons width as measured by Graphics.MeasureString.
I want to restrict the text from red line to red line so when the text scrolls it does not interfere with the arrow indicators, can the text area be overridden to some custom region?
I'm having an issue with some code I'm trying to write that takes a screenshot of the current screen and saves it to a bitmap file on my local PC.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim tempScreenshot = New Bitmap(Screen.PrimaryScreen.Bounds.Width,
[code].....
How does one add a bitmap to a project so that you can refer to it by name? i.e. MyProject.MyBitmap.bmp
View 2 RepliesWhat i'm trying to do is fill a non rectangular region (actual build up out of 6 points) and draw a bitmap in such a way that it stretches with the region. Now for drawing a normal bitmap or even a trapezoid bitmap there are examples on the net. but drawing anything more then that with GDI+..
View 11 RepliesHow do I rotate a bitmap image that has been placed in a picturebox? I need to make it appear upside down or rotated according to user input. I can't find anything in the properties to do this
View 2 RepliesI am using the following code to place a rectangle around a form / form control, however what I want to do is make my screen grey and only the form / form control area be displayed in colour.
Code:
I have googled for ages trying to find something on this, but with no luck.
To illistrate this better they are using the same functionality in snagit 10, please see below link to a page that has a video link showing this (23 sec into video)[url]
I need to write a code to find identical adjacent pixels in a bitmap image. It should work as the 'magical wand' in Photoshop. My images are always black and white (white background with car parts drawed in black). Given the x,y coordinate for a single black pixel in the whole image, the code should find (and paint with another color, say red) all other black pixels that are linked to that one, and so on, until all linked black points will be painted in red.
[Code]...
I need to write a code to find identical adjacent pixels in a bitmap image. It should work as the 'magical wand' in Photoshop.My images are always black and white (white background with car parts drawed in black). Given the x,y coordinate for a single black pixel in the whole image, the code should find (and paint with another color, say red) all other black pixels that are linked to that one, and so on, until all linked black points will be painted in red.This way, suppose that I have an image with 4 car parts drawed, then if I give the x,y coordinate of a black pixel, just THAT part to whose the black pixel belongs to should be painted in red. All other parts will remain black. Does it make sense?At the end, there are two pictures (before and after) to help understanding what I need to do to the images.I tried a simple 8-pixel adjacent approach for every pixel (starting on initial coordinate) but it turns out into a very stupid and endless looping algorhitm.
Code:
Imports System.Drawing
Imports System.Drawing.Drawing2D
Imports System.Windows.Forms
[code]....
how can i get the general color based on what is returned from Bitmap.GetPixel()? Like i want all shades of blue to just be blue, and so on
View 10 RepliesI am trying to create bitmap with my text and transformation. I am sure that there is no error in my code. Because this code is worked previously. Here is my code.
[Code]...
I have to create an image that is to mimic a single clock rotating hand within a square area,and the user has to choose the width and speed of the rotation and the direction.i managed to create the square area with a hand inside,with this codes and variables,
(Dim Mygraphics As graphics = e.graphics
mygrqaphics.Draw Rectangle(pens.color x1,x2,y1,y2)
mygraphics draw line(pens.color,x1,x2,y1,y2),now i have to find codes and variables to rotate the hand or line within a square area.one point remaining constant the other moving.
I have decided to use a flood fill algorithm for my application, using this pseudo-code from Wikipedia:Flood-fill (node, target-color, replacement-color):
1. Set Q to the empty queue.
2. If the color of node is not equal to target-color, return.
3. Add node to Q.
4. For each element n of Q:
5. If the color of n is equal to target-color:
6. Set w and e equal to n.
7. Move w to the west until the color of the node to the west of w no longer matches target-color.
8. Move e to the east until the color of the node to the east of e no longer matches target-color.
9. Set the color of nodes between w and e to replacement-color.
10. For each node n between w and e:
11. If the color of the node to the north of n is target-color, add that node to Q.If the color of the node to the south of n is target-color, add that node to Q.
12. Continue looping until Q is exhausted.
13. Return.
I was doing alright, until I hit the "continue looping until Q is exhausted".I don't quite get that.
im working on changing this code.. The code do a "floodfill", but I want a "floodfill" with a range of color..so i dont understand very much of this code, but somehow i want to change the recursive funciontion to paint only in a certain region I think I have to work whit this function. Actually I do, changing the fourth parameter (before: &HFFFFFF)ExtFloodFill(hMDC, e.X, e.Y, CInt("&H" + Hex(pixR) + Hex(pixG) + Hex(pixB)), 1) I only found this code to do that, I tried to do my own recursive function, but it didnt work..
[code]...
A short semi fast flood fill. I'm about to run it on 10+ million shapes. There always seem to be a few unique situations where something doesn't work.
Public Sub Fill(ByVal bmp As Bitmap, ByVal pos As Point, ByVal color As Color)
If bmp Is Nothing OrElse pos.X < 0 OrElse pos.Y < 0 OrElse pos.X >= bmp.Width OrElse pos.Y > bmp.Height Then Exit Sub
Dim bmd As BitmapData = bmp.LockBits(New Rectangle(0, 0, bmp.Width, bmp.Height), ImageLockMode.ReadWrite, bmp.PixelFormat)
Dim stride As Integer = bmd.Stride
[code].....
Im working on a project that needs to print a report of one client.Everything went smooth untill i came across my multiline input text data.When i display it in the PrintPagePreview the text go's outside my page. Even when im printing it only the halve of my text is displayed. I googled and looked everywhere but i can't get a clear fix for it.
[Code]...
I used to program with Visual Basic 6, so I have alot of old programs that I'm updating, plus I'm learning the new VB2008 methods. I'm writing a program that replaces the old "BitBlit" function which is no longer supported by Visual Basic 2008. It involves three picture boxes, one holds the sprite bitmap, a second holds the mask (silhouette) of the sprite bitmap, and a third has a background image.
[Code]...
drawing text on a window which is not the current form's window.I remember doing this in Win32 api with getwindowdc(handle) to obtain a DC for the Window, then textout() on the DC.
View 2 Replieshow to create a user interface in a game such as the application XFire using Visual Basic?
View 3 RepliesI'm working on a design project where I have to use a Graphical User Interface that contains a drag and drop form. It consists of having a window dropped on a wall. Both of them are images to scale. I would like to know what kind of code I would have to use to show the x and y coordinates of one of the points of my window when dragged so when I drop it, I'm dropping in it on the desired coordinate of the wall.
View 2 RepliesOk, I want to create a class that will handle a special rectangle graphic.In my form, I want to have two of these special rectangles. So, basically, I need two instances of that class in my form, right?I manage to initialize two, alright. But, how exactly am I supposed tomanage drawing/graphics etc in a class, and the results to be displayed in my form?
View 13 RepliesUsing graphics paths for designing...but am getting an error when trying to add a shape to : _shapelist.add(createshape())
It says : Value of type 'system.drawing.drawing2d.graphicspath' cannot be converted to '1-dimensional array of system.drawing.drawing2d.graphicspath'
I was wondering if I could elicit some tips on how to procede with an interface design approach.That is. What is a good way to go about establishing a "work area" where one can have multiple "floating forms" in this area.Can you have a form which occupies the entire windows desk top and the other forms "float" in this space? the "floating" forms would need to interact with each other where pressing buttons etc on them would affect other forms on the "workspace") Or what would be a good way to start accomplishing that? Or is there a better way to get the same effect?
View 4 RepliesI'm trying to make a .dll that contains a lot of basic functionality that a program can use. Currently i am trying to use interfaces to make a lot of this functionallity independend of the program using it but i hit a snag. The Basic idea is that a programmer will create his own object using the interface discribed in my .DLL file. Then implements those functions as he likes. He can then instanciate a controller (found in the same DLL) and sends his custom object implementing the interface to that Controller. The controller can then be started and will take over all the work. I do not know what type of object is send to the controller and idealy i want to program it in such a fashion that i shouldn't care as long as the object send implements that interface.In code I am trying to achieve the following: (quite simplyfied)
.Dll:
Code:
Public Interface MyInterface '<----Decleration of the interfaceFunction GetData() As Integer
Function SetData(Data As Integer)
end interface
[code]....
this propperly. I know that the second i set the interface adaptor in the Controller VS comes nagging that it can not be converted to a "MyInterface" Class. Obviously i am doing something wrong. I can change the datatype that the controller expects to the "MyController" type but that would completely ruin the whole idea of flexibillity. I am hoping someone sees what i am trying to do and can point out where i made the thinking error.
Is this where i would post a picture of my interface and get feedback on changes for easier use? If not is there someplace on this forum or any other forum to do this?
View 1 RepliesSo I decided to make my famous tile selector project, but instead of drawing in a form's graphics, do it inside a tabpage.Well, I managed to get it working, but it seems to... flicker.Normally, setting the form's DoubleBuffered property to True would help a lot there, but apparently, the tabpage has no such property.
When I invalidate the tabpage, I draw two images and fill one rectangle.Following past advice, those two images were created before, just once, and are stored in a variable so I don't create them every time I invalidate the tabpage.
Ok I have this: This makes a sub called 'graphicspaint' then writes "demo version" to a picturebox1
Code:
Imports System.Drawing
Imports System.Windows.Forms
[code]......
i whant do my own shadow effect. i can do the shandow. but how can i plus 2 bitmap images(1 above the other)?
View 15 RepliesI would like to use Graphics.FillRectangle or Graphics.Clear with semi-transparent colour (e.g. ARGB=128,0,0,0) to darken entire area of the Graphics object except some specified (rectangular) area:I know this can be achieved with four FillRectangle calls, but I wonder if it cannot be done easier.I am aware of simple clipping (Graphics.SetClip), but this allows me to clip everything outside the specified area and I would like to achieve the opposite.
View 1 Replies