VB 2010 Forms App Project Using ADO.Net Has Started Crashing VS 2010 Whenever Load It?
Aug 11, 2011
well until a few day ago. I don't know what I have introduced to cause the problem but now, whenever I load the project, VS 2010 (SP1) crahes. If I delete the project's suo file, the project loads (really quickly) and all is well until I exitVS 2010. When I re-run it and try to load the project, it crashes again unless I delete the suo file.The program can be built for x64 and x86. Now, when I reload the project (after deleting the suo file), it comes up in Debug - Any CPU mode. I can change from Debug to Release and from Any CPU to x86 but if I try and change from x86 to x64, VS 2010 crashes.This is not always the case though. If I build the x86 version and then switch to x64, all is well and I can build the x64 version. Obviously, there's something wonky going on.
View 7 Replies
ADVERTISEMENT
Dec 5, 2010
I create a new Windows Forms Application project in VB.NET without changing any of the settings or labels. Then I click on "Add Data Source" and go through the steps in my programming book. Except that Visual Studio is crashing with a message stating that VB encountered a problem...checking for causes...restarting VB.
Sometimes I get to click the "Debug and Run" button before this happens; other times, it occurs before I move all the labels in form from the data source; and still other times, it happens when I click the "Stop Debugging" button.
I have tried removing VB and reinstalling it, but this still is not helping. (If it matters, I'm getting my copy of VB from [URL]
How can I stop Visual Studio from crashing whenever I try to load or work with a Data Source?
View 1 Replies
May 28, 2010
Has anyone else had issues with Visual Basic 2010?My visual basic program has been running fine for months but recently every time I try and load a project (any project) the program freezes, then I have to close it down and reload, every time I load Visual basic for the second time I get the following error:
HTML
An error was encountered while opening associated documents the last time this solution was loaded. Document load is being skipped during this solution load in order to avoid that error.Plus when trying to run a project in debug it takes ages to load (around 5 minutes) this has only started happening recently, projects were loading in seconds.
View 9 Replies
Feb 8, 2012
i just got visual studio pro 2 days ago and every time i create a project, close VS 2010 and when i come back to work on my project and i click on my Form.vb i got every time : Visual Studio has stopped working.Then i tried run as administrator it doesn't work. What i don't understand it's when i click on show code the form load but the moment i click on it ,it just crashing and it's make me wanna drop laptop cascade...I've look on forum and post here but i haven't saw what i was searching.Here the error that VS show me :(Those files doesn't exist i search)
Files that help describe the problem:
C:UsersUsagerAppDataLocalTempWER152.tmp.WERInternalMetadata.xml
C:UsersUsagerAppDataLocalTempWER18C9.tmp.appcompat.txt
C:UsersUsagerAppDataLocalTempWER3520.tmp.hdmp
[code]....
View 2 Replies
Sep 18, 2011
I am using VB.net 2010 and I have two projects: SQLtesting and Controls. Their physical locations are:
C:My DocumentsVisual Studio 2010ProjectsSQLtestingSQLtesting [forms reside here]
C:My DocumentsVisual Studio 2010ProjectsControlsControls [forms reside here]
[code].....
View 1 Replies
May 19, 2012
I am looking for Visual Basic 2010 code that would loop through all the forms in a project, i.e., the equivalent of the following VB 6 code:dim frmFom as Form for each frmForm in Forms
View 4 Replies
Dec 20, 2011
no forms can be seen when creating a new project.. i am going to choose a window form but there are no forms to choose.
View 12 Replies
May 27, 2011
I am looking for Visual Basic 2010 code that would loop through all the forms in a project, i.e., the equivalent of the following VB 6 code
View 1 Replies
Jan 12, 2012
This is an annoying issue that started less than a week ago and couldn't come at a worse time, as I have a major project deadline to meet. At least once every TEN minutes, the program crashes with the error "Microsoft Visual Studio has stopped working" -- it only occurs when I am writing/editing code while execution is paused (Edit and Continue), which I do all the time since I am stepping through rather complex subroutines line-by-line. I literally have trained myself to save after each line of code I write, delete, or change, so thankfully I never lose much, if anything, when I restart, but it is irritating and time-consuming having to set up everything in the program and get to the place in the code that I was before. I have installed VS 2010 SP1, tried deleting the .suo file, and a few other supposed fixes that I came across online, to no avail.[code]...
View 5 Replies
Feb 10, 2011
I have a very large program I would like to write but think starting with a smaller test program would be a good idea. What I want to know is: I have a base Form from which a user clicks a button to answer a question (Answer A, B, C, or D) which if the answer is correct will pop up a "Correct! answer response in a separate window. This is ok for now, however, when the "proceed to next question" button is clicked, I would like the next question to appear in the original base form window.
Right now it pops up in a separate window and I'd rather not have 20 windows open at the end of the quiz. How do I load the next form in the same window!? Obviously it's possible and could be something I'm completely overlooking, and I've also read that I could replace all data with the next Form. I have searched "Visual Basic load form in same window" and came up with results, but none of what I'm looking for.
View 2 Replies
Jun 17, 2011
I was wondering is it possible to put forms into a class library project and if so could I use those forms as an mdi child from my main forms app?A bit behind what I am trying to do:I am creating a game which is essentially going to have its own 'operating system' As the user progresses in the game they can 'install' new software into their operating system.I have my 'Desktop' that is an MDI Parent and what I want the users to be able to do it when they have purchased a new bit of software (also in game) the game will connect to my central server download a dll and place it in a directory, that is essentially installing the new bit of software and the game will then pick up that dll and add a new button the Programs list and when the user clicks on that software in the Programs list it will launch the form in the Class Library as an MDI Child of the 'desktop
View 2 Replies
Jan 18, 2011
At my school i have to make a program and im almost done with it but everytime if i dont put any inputs on the program and press calculate it crashes. What should i write in the codes not to crash if all the inputs are empty.
View 7 Replies
Apr 2, 2012
This is going to be a strange issue and I don't expect an answer,.I'm using Ghost32.exe to image HDDs within a Windows PE environment. With the release of WinPE 4.0, we can now use the 4.0 .NET framework. So in order to capture any errors that Ghost reports, I'm redirecting the standard error stream so I can review it later.
But, when I implement those two lines of code (highlighted below), the application crashes.I've implemented error logging with the UnhandledException event of the application, but it never fires during this error. All other errors fire, but this one does not.So I ran it in normal Windows and I receive the following error:Quote:The system cannot find the file specified
But when I comment out those lines, it opens just fine. So I'm a little confused.
[Code]...
View 1 Replies
May 31, 2011
I have an MDI parent screen that loads on startup and a lot of child forms that load when opening. So as the child forms load there's a lot of flashing and it looks really ugly. Once they're loaded all I have to do is use a bring to front, maximized command and it works smoother than closing a form and opening a new one every time a different form is selected. I've tried creating a splash screen, minimizing the forms on load, etc and everything still works in order so first the splash screen then the forms load.
How would you set it up so a splash screen stays on top of all other forms for like 5 seconds while the forms load in the background without seeing them load? Right now the screen shows then when it's done it moves on to step 2 which is loading the child forms. If no splash screen, how do I make it load so you don't see all the child forms opening at once?
View 3 Replies
May 10, 2011
- I'm working on a windows forms application (.NET 4.0). - My form contains a 'Fast Line' chart using the Microsoft chart control included in VS2010. - The chart gets filled with about 20,000 datapoints. - My application then starts receiving market data from a server via DDE (Dynamic Data Exchange) in real-time and adds it the chart.
Note: I have no control over the server and so I have to deal with DDE only even though it's an outdated technology. VS doesn't support DDE anymore and so I use the Ndde library which works like a charm.
Private Sub StartDDE()
'first we connect to the DDE server:
Dim client As DdeClient = New DdeClient("ServerApplication", "Bid")
[Code].....
View 1 Replies
Sep 7, 2010
Does anyone started to work with VB 2010?. I have to migrate an application from VB6 to a new language and I've decided that I will rewrite the application on VB 2010. Well, I am here in front of the new flash 2010 and I have no idea where start. ja!
View 8 Replies
Mar 26, 2012
In my VS2010 VB project I have a lot of external references to DLLs, to the point that organization has become a major headache and I'm wondering if I am going about it the wrong way. My assembly references include common redistributables (SQL Server Compact 3.5 SP1, ReportViewer 2010 SP1, DataVisualization, as well as some useful 3rd party dlls from CodeProject and CodePlex.
Currently, I am copying each DLL into a 1st level folder (/dll_lib) under my named project folder (under the solution folder), and adding the reference from that path. However, I see that Visual Studio copies the DLLs to various other locations (/bin/debug or /bin/release) in my project when I build the project or solution, and some of the 3rd party DLLs come with instructions to copy them manually to /bin.
What is the "best practice" for where to put the DLLs? Can I just put all of them under /bin and let the build event copy to /bin/debug or /bin/release as required? Should I try to force a single reference path for the dlls in the project output?
View 5 Replies
May 23, 2010
Where should i start? any tutorials out there? I only know the basics of VB and how to works.
View 5 Replies
May 16, 2010
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Hide()
Dim value As String = """" + Application.ExecutablePath + """ -nogui"
[code]....
I want the program to exit the sub after the timer has been started. But if theres no args, it should just show itself. The problem is that it seems to not care about the exit sub thingy, cause it shows itself anyway.
View 4 Replies
Oct 19, 2011
I am using DataSet.ReadXml() to create a DataSet from the following XML file, so that I can quickly query it using Linq.[URL]..I then use the following object to create a DataTable which can be used as a dictionary, with a ConvertToFriendlyFormat function that takes an Emulator_Id and and a string that corresponds to a DicEntry node's StoredFormat attributed, and return the same node's FriendlyFormat attribute.
This does work BUT it is extremely slow (~11 seconds to call it ~220 times). I have been unable to figure out how create the DataSet when the object is initialised and just query the simple DataTable in the ConvertToFriendlyFormat call. I guess this is what is slowing it down?
[Code]...
View 4 Replies
Sep 4, 2009
how to use Visual Basic to pass arguments to an application after said application was started. Example, "myapp.exe -d" enables debug mode, I want to be able to start myapp.exe then have a checkbox labeled "Debug mode" in Visual Basic. Upon "Debug Mode" being checked, it passes the argument -d to myapp.exe. Upon it being unchecked, it withdraws that argument from myapp.exe.
View 4 Replies
Aug 10, 2011
I am loading 25000 records into my gridview with 70 Columns and it is crashing.
Why is it crashing?
View 1 Replies
Jun 6, 2012
The situation: when i build my project (or publish) Visual Basic 2010 makes and exe and a couple ddl files. when i run the project with the .exe and the other files the program works perfectly.
My problem: I want to share it with friends and it is just a verry little program ( a n internet radio) so i want it to be 1 .exe with out any other instalation needed so i can easly share it to anyone who wants it. when i make an even smaller program and Debud->build it, it is only 1 exe and no instalation needed. so is there a way to make my program to 1 exe only?
View 4 Replies
Feb 8, 2011
How can I change my connection configuration of my datasets and project. I mean, my datasets are not hard coded, I am using dataset wizard. Now, I have to change the computer name to IP.
I am worried that it could give a destruction to my project. How could I change it easily and safe?
View 2 Replies
Jun 21, 2011
will a VB 2010 (Windows Forms Project) run on the Windows 8 platform?
View 3 Replies
Jan 12, 2011
How can I convert a C# 2010 project to VB2010?
View 3 Replies
Jul 11, 2010
I was wondering if you could point me in the right direction as far as developing a super simple plugin for MS Project (both 2007, which uses the old style ribbon, and 2010 which uses the new ribbon). What I need to implement: create an executable that installs a new button, with a specific icon, in some per-determined section of the ribbon
when the user presses the button MS project needs to save a file in a specific format and location and then call a batch file.
that's it - pretty basic, right? Turns out, I know nothing about this space - so apologies in advance for how trivial this may be. Note: I'm not tied to a specific language - whatever is simpler / faster will do. BTW, does anyone sell components like this one? I don't necessarily need to code this if there's decent stuff out there for sale.
View 1 Replies
Jan 11, 2008
How do I reference the library project when I get this error?
"A project with an output type of class library cannot be started directly In Order to debug this project, add an executable project to this solution which references this library project. Set the executable project as the startup project."
View 8 Replies
Feb 18, 2010
I have downloaded the attached code from codeproject site, i'm new in vb.net, i have some background knowledge in vb6. when i try to run the code the following error message is diplayed:"A project with a output type of class library cannot be started directly"
View 2 Replies
Apr 8, 2011
I have a class library project (.dll) which contains a couple of forms.I now have a new project that would be the Client.
1) How do I load the forms from the dll into this project at runtime?
2) How do I set the client to be the MDiParent of the forms that will be opened from the dll?
View 1 Replies
